hometechfocus 
Nowadays, there are so many products of welding rods oven in the market and you are wondering to choose a best one. You have searched for welding rods oven in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings welding rods oven which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
SÜA – Portable Electrode Drying Oven – 22 Lbs (10 Kg) TRC Series – 115 Volts
- The TRC Series is a lightweight portable electrode drying oven that prevents electrodes from absorbing moisture that can negatively affect the welding job.
- Two models available, TRC-5 can store up to 11 Lbs (5 Kg) and TRC-10 can store 22 Lbs (10 Kg) of 18 inches long electrodes or smaller – Easy to lift electrodes basket that can be locked open for convenient one-hand operation even with the thickest welding gloves.
- Temperature range: Ambient – 302 °F (Ambient – 150 °C) when connected at 115 Volts – Easy to set-up analog temperature dial. ***For Model TRC-10 only
- higher temperatures, (570 °F – 300 °C) can be reached when connected at 220 Volts***
- Weight empty: 9.5 Lb – Height: 24″ – Diameter of Cylinder: 6-½” – Inlet Power: 115V / 220V
- Can be used at the shop or in the field. Compatible with generators/welders with 115 Volts three plug outlets. A must-have when welding E7018, E7024, and other Low Hydrogen electrodes
Stick electrodes must be properly stored in order keep its quality weld deposition. When stick electrodes absorb moisture from the air, they must be dried to restore their ability to deposit quality welds. Electrodes with too much humidity may results in welds with cracking or porosity. Operational characteristics may be affected as well. If you’ve noticed unexplained weld cracking or porosity problems, or if the stick electrode arc performance is not at its best, it may be due to the presence of moisture in the electrode coating. Proper storage methods or re-drying procedures must be applied. Low Hydrogen Electrodes like the commonly used E7018 must be dry to perform adequately, once the original package has been opened, they must be stored in an electrode oven at 250F – 300F. AWS D1.1 Structural Welding Code specifies allowable atmospheric exposure of 4 hours for this type of electrodes. After that time, low hydrogen electrodes must be re-dried. Non-Low Hydrogen Electrodes can also be affected by moisture. If they are exposed to humid air for long periods of time the welding characteristics may be affected. It is recommended to store the electrodes in a heated oven at 100F – 120F.
Electrode Ovens, 10 lb, 110 V, Analog Thermostat
Best Welds Electrode Ovens Includes external thermostat control. Each oven is tested and heated to rated temperature before shipping Pack of 1 WARNING: This product can expose you to Lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov –
Keen K-10L Portable Welding Rod Oven with Lid Latch – Dual 120V/240V – Made in USA
- Stores 10 lbs. of flux-coated 7018 low-hydrogen SMAW welding rods up to 14 inches in length to prevent weld defects
- Economical portable welding rod storage oven keeps hygroscopic low-hydrogen welding electrodes dry in the field
- Portable, lightweight design provides protection for welding rods during transfer from the shop holding oven to the field
- Exceeds AWS D1.1 Structural Welding Code mandatory guidelines for heated welding rod storage
- The Keen K-10L is a square-shaped, portable welding rod oven with latched lid that can be positioned vertically or horizontally in the field allowing for easy removal of welding rods in the field
About the K-10L Portable Rod Oven – 10 lbs. Capacity
The K-10L is designed to store 10 lbs. of 14″ welding electrodes during transfer from large shop ovens and at the job location. Economical, lightweight and easy to carry, our K-10L model maintain rods at ideal temperatures to prevent moisture pick-up and to optimize welds.
The K-10L’s small capacity is suitable for the hobby welder as well as the highly trained professional. It out-performs most larger capacity portable ovens on the market and has a solid steel construction for long product life and durability. It’s low cost and compact size enables shops to keep 10 or 20 on hand for welders heading out to the field.
Heavy-Duty Construction
The K-10L has a solid steel construction for long product life and durability. The exterior is powder-coated in KEEN blue and features a rugged handle for carrying the unit. 1″ (2.54 cm) Thermal insulating wool makes oven energy efficient and keeps electrodes hot and moisture-free.
Performance Heating
The custom-designed heating elements used on our portable ovens are part of a new class of highly energy-efficient, technologically-advanced heating elements that have a very low environmental impact. They reach maximum operating temperature in just 5-10 seconds and have a very low amperage draw enabling the oven to be extremely energy-efficient in the field.
Quality Temperature Control and Electrical Safety
Because of our unique self-regulating heating technology, thermostats are not a necessary safety feature for our portable ovens. The only case in which they would be necessary is if the user wants to reduce the temperature below 250°F for storing electrodes that require lower temperatures than low-hydrogen rods.
Lincoln Electric Hydroguard Portable Electrode Oven| 10 lb Capacity | Premium Fiberglass Insulation | 115 V Only | K2932-1
- Moisture protection – used to prevent moisture from contaminating your welding electrodes and to maintain low hydrogen weld deposit properties. Moisture is a common cause of weld cracking or Porosity.
- Portable design – easy to transport, metal case rod oven weighs 10.5 lbs.
- 10 lb capacity – designed to allow storage of up to 10 pounds of 18” or smaller electrodes.
- Preset & insulated temperature – the oven chamber is preset to 300° f and features 1.5” wall insulation to efficiently maintain the desired thermal properties.
- Rod elevator – the oven chamber has a lift removable storage rack which makes it easy to extract your stored electrodes.
- Built to last – durable steel construction & tough powder-coat finish.
- Versatility – perfect for use at home, on a farm, in the shop, in maintenance, in construction or in general fabrication.
- Made in the usa and features a 1 year warranty
Outstanding moisture resistance for improved weld quality hydro guard rod ovens from Lincoln Electric help you protect your stick electrodes from moisture pickup, a major contributor to weld cracking and porosity. Protect your rods and drive moisture away. Your welds depend on it.
Keen K-450 Welding Rod Oven – 120V – Max Temp 550F – Made in USA – CSA-listed
- Stores 450 lbs. of flux-coated 7018 low-hydrogen SMAW welding rods to prevent weld defects
- Economical welding rod storage oven for small to medium-sized welding shops and pipeline fabricators
- Exceeds AWS D1.1 Structural Welding Code mandatory guidelines for heated welding rod storage
- Bench-top level welding rod oven design allows easy loading and unloading of 7018 welding rods
- Unique welding rod storage shelving system induces natural convection for thorough heating of flux-covered 7018 low-hydrogen welding rods to maintain factory-fresh dryness
This product is manufactured in the USA
About the K-450 Bench Top Rod Oven – 450 lbs. Capacity
The K-450 stores 450 lbs. of welding electrodes and is an economical choice for shops that need to centrally store their consumables for long-term, 24/7 moisture protection. Our K-450 model maintains welding rods at ideal temperatures to prevent moisture pick-up and to optimize welds.
Our bench holding ovens are an excellent choice for small to medium-sized shops. Too large to be considered portable, yet small and light enough when empty to be picked up by a single person, bench ovens are an economical choice when a large floor oven is not required. Bench models are designed to be placed upon a bench or other stable surface for easy loading and unloading.
Heavy-Duty Construction and Performance Heating
The K-450 has a solid steel construction for long product life and durability. The exterior is powder-coated in KEEN blue and features a rugged door handle, tack- welded door hinges, heavy-duty storage shelves and 1″ (2.54 cm) thermal insulating wool for energy-efficiency. The K-450 features a long-lasting 1000W Incoloy-sheathed tubular heating element for effective heating. It is located beneath a protective cover for damage protection and can be replaced quickly and easily when required. An external dial-adjustable thermostat is standard equipment. An optional thermometer accessory is available for the K-450 and is installed in the door (P/N 301127).
Shelving Design
The hexagonal shelving in the K-450 produces better natural convection within the oven when compared to flat shelving. Most electrode manufacturers discourage ‘stacking’ of electrodes too deeply while being heated to allow for better airflow over the consumable. With our shelving design, heat reaches the electrode coating more effectively to stave off atmospheric moisture.
Phoenix 1200200 Dry Rod Type 300 Bench Electrode Ovens, 400 lb, 120V/240V, Opt Thermometer, 18" Diameter x 19" Depth
DryRod II 120/240V Portable Electrode Ovens – ph 1205500 ph type 1 12010 lb oven
1205500 Model Code: AA (part# 1205500)This item features: -Wire wrap heating element provides even, continuous heat for 100pct protection of electrodes from unpacking to use. -Power inlet module easily accommodates alternative cord sets. -Spring latch tightly secures insulated lid. -Safety yellow color ensures high visibility from a distance. -Rod elevator easily extracts welding rods from oven on Type 1 & 2. -Standard features include an adjustable thermostat, and a 120/240 Voltage selector switch. -Indicator light signifies ”power on.”. -Insulation Thickness: 1 1/2 in. -Phase: Single. -Color: Yellow. -Material: Steel. -Finish: Powder Coated. -Price is for 1 Each. Testing and approvals: -Designed for cUL (Canadian) and CE approval. Model Code Model Description AAType:1, Capacity Wt.:10 lb, Temp. Range:300.0F [Max], Chamber Size:2 7/8 in Dia. x 19 3/4 in Depth, Voltage:120.00 V, Voltage Type:AC/DC, Watts:75.00 W, Width:5 3/4 in, Depth:7 1/4 in, Height:23 in, Wt.:12 lb ABType:1, Capacity Wt.:10 lb, Temp. Range:300.0F [Max], Chamber Size:2 7/8 in Dia. x 19 3/4 in Depth, Voltage:120.00 V, Voltage Type:AC/DC, Watts:75.00 W, Width:5 3/4 in, Depth:7 1/4 in, Height:23 in, Wt.:12 lb ACType:1, Capacity Wt.:10 lb, Temp. Range:300.0F [Max], Chamber Size:2 7/8 in Dia. x 19 3/4 in Depth, Voltage:240.00 V, Voltage Type:AC, Watts:75.00 W, Width:5 3/4 in, Depth:7 1/4 in, Height:23 in, Wt.:12 lb ADType:15 w/Wheels, Capacity Wt.:150 lb, Temp. Range:100.0F [Min], 300.0F [Max], Chamber Size:14 in Dia. x 19 3/4 in Depth, Voltage:120.00 V, 240.00 V, Voltage Type:AC, Watts:600.00 W, Digital Thermometer:No, Width:19 3/4 in, Depth:21 3/4 in, Height:28 in, Wt.:81 lb AEType:15 w/Wheels, Capacity Wt.:150 lb, Temp. Range:100.0F [Min], 300.0F [Max], Chamber Size:14 in Dia. x 19 3/4 in Depth, Voltage:120.00 V, 240.00 V, Voltage Type:AC, Watts:600.00 W, Digital Thermometer:Yes, Width:19 3/4 in, Depth:21 3/4 in, Height:28 in, Wt.:81 lb AFType:2, Capacity Wt.:20 lb, Temp
Keen K-200 Bench Welding Rod Oven – 120V 1-Ph – Max Temp 300F – Made in USA – 200 lb. Capacity – CSA-listed – with Factory-Installed Analog Thermometer
- Stores 200 lbs. of flux-coated 7018 low-hydrogen SMAW welding rods to prevent weld defects
- Economical welding rod storage oven for small to medium-sized welding shops and pipeline fabricators
- Exceeds AWS D1.1 Structural Welding Code mandatory guidelines for heated welding rod storage
- Supplied with one factory installed analog temperature thermometer
Made in USA – CSA-listed
About the K-200 Bench Top Rod Oven – 200 lbs. Capacity
The K-200 stores 200 lbs. of welding electrodes and is an economical choice for shops that need to centrally store their consumables for long-term, 24/7 moisture protection. Our K-200 model maintains welding rods at ideal temperatures to prevent moisture pick-up and to optimize welds.
Our bench holding ovens are an excellent choice for small to medium-sized shops. Too large to be considered portable, yet small and light enough when empty to be picked up by a single person, bench ovens are an economical choice when a large floor oven is not required. Bench models are designed to be placed upon a bench or other stable surface for easy loading and unloading.
Heavy-Duty Construction and Performance Heating
The K-200 has a solid steel construction for long product life and durability. The exterior is powder-coated in KEEN blue and features a rugged door handle, tack- welded door hinges, heavy-duty storage shelves and 1″ (2.54 cm) thermal insulating wool for energy-efficiency. The K-200 features a long-lasting 500W Incoloy-sheathed tubular heating element for effective heating. It is located beneath a protective cover for damage protection and can be replaced quickly and easily when required. An external dial-adjustable thermostat is standard equipment. An optional thermometer accessory is available for the K-200 and is installed in the door (P/N 301127).
Shelving Design
The hexagonal shelving in the K-200 produces better natural convection within the oven when compared to flat shelving. Most electrode manufacturers discourage ‘stacking’ of electrodes too deeply while being heated to allow for better airflow over the consumable. With our shelving design, heat reaches the electrode coating more effectively to stave off atmospheric moisture.
Keen KT-15 W/T Holding Portable Welding Rod Oven (120V/240V) – Maintains up to 15 lbs (6.8 kg.) of 18" (45.7 cm) electrodes at optimum temperature.
- Stores 15 lbs. of flux-coated 7018 low-hydrogen SMAW welding rods up to 18 inches long to prevent weld defects
- Economical portable welding rod storage oven keeps hygroscopic low-hydrogen welding electrodes dry in the field
- Portable, lightweight design provides protection for welding rods during transfer from the shop holding oven to the field
- Exceeds AWS D1.1 Structural Welding Code mandatory guidelines for heated welding rod storage
- Stable, square-shaped portable welding rod oven design with rod lifter for easy removal of welding rods in the field
Made in USA – CSA-listed
About the KT-15W/T Portable Rod Oven – 15 lbs. Capacity
The KT-15W/T is designed to store 15 lbs. of welding electrodes during transfer from large shop ovens and at the job location. Economical, lightweight and easy to carry, our KT-15W/T model maintain rods at ideal temperatures to prevent moisture pick-up and to optimize welds.
The KT-15’W/T’s small capacity is suitable for the hobby welder as well as the highly trained professional. It out-performs most portable ovens on the market and has a solid steel construction for long product life and durability.
Heavy-Duty Construction
The KT-15W/T has a solid steel construction for long product life and durability. The exterior is powder-coated in KEEN blue and features a rugged handle for carrying the unit. 1″ (2.54 cm) Thermal insulating wool makes oven energy- efficient and keeps electrodes hot and moisture-free.
The KT-15W/T features a liftable “rod elevator” with handle that supports and lifts the rods. An exterior, red “ON” indicating light is standard. The KT-15W/T welding rod oven features an external dial-adjustable thermostat with a range of 150-300F.
Performance Heating.
The custom-designed heating elements used on our portable ovens are part of a new class of highly energy-efficient, technologically-advanced heating elements that have a very low environmental impact. They reach maximum operating temperature in just 5-10 seconds and have a very low amperage draw enabling the oven to be extremely energy-efficient in the field.
Quality Temperature Control and Electrical Safety
Because of our unique self-regulating heating technology, thermostats are not a necessary safety feature for our portable ovens. The only case in which they would be necessary is if the user wants to reduce the temperature below 250°F for storing electrodes that require lower temperatures than low-hy rods.
Rod Ovens – 120V le lro-50-120 Rod Oven 50 lb
380-01950 Features: -Size Electrode Handled: 10 in [Min], 18 in [Max]. -Phase: Single. -Price is for 1 Each. Product Type: -Ovens and grinders. Maximum Voltage: -120 Volts. Generic Specifications: -Frequency: 60.0 Hz, 50.0 Hz. Generic Dimensions: -Cord Length: 10 ft. Dimensions: Overall Product Weight: -23.35 Pounds.
Conclusion
By our suggestions above, we hope that you can found welding rods oven for you.Please don’t forget to share your experience by comment in this post. Thank you!
