hometechfocus 
Nowadays, there are so many products of thermosoft floor heating kit in the market and you are wondering to choose a best one. You have searched for thermosoft floor heating kit in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings thermosoft floor heating kit which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
50 Sqft Electric Radiant Floor Heating System with Required GFCI Programmable Thermostat 120V
- 50 Square Feet Heating Mat, 20 Inches Wide x 30.1 Feet Long, Includes Required GFCI 7 Day Programmable Thermostat – 120VAC
- Highest Quality USA Heating Cable Designed for Longevity by an over 20 Year USA Manufacturer
- Listed and Safe for Wet Locations. Thin profile ~1/8″ thick. Multiple Configurations, Adheres to the Floor.
- ETL Listed for US & Canada – Limited Lifetime Warranty by an over 20 Year Trusted USA Manufacturer
- Voltage: 120V – Amps: 5 – Watts: 600 – 15 ft Cold Lead – 12 Watts/Sqft
15.0 sq. ft, 120V Ceramic & Stone Tile Electric In-Floor Heating Mat – ThermoTile TT10-120 – Other Sizes Available
- Combine multiple heating mats of any size to cover your total heating area. Use 120V solutions for rooms under 150 sq. ft. and 240V when larger.
- Voltage: 120V, Power: 180 Wt, Amperage: 1.5 Amp. , Heating mat area coverage (any shape): 15 sq. ft.
- Zero Electromagnetic Field. No interference with electronic devices in the house.
- Installation-friendly 10′ armored lead wires are pre-attached to only one end of heating mat.
- Made in the USA with Lifetime Warranty, UL listed and we ship same or next business day.
15.0 sq. ft, 240V Ceramic & Stone Tile Electric In-Floor Heating Mat – ThermoTile TT10-240 – Other Sizes Available
- Combine multiple heating mats of any size to cover your total heating area. Use 120V solutions for rooms under 150 sq. ft. and 240V when larger.
- Voltage: 240V, Power: 180 Wt, Amperage: 0.75 Amp. , heating mat area coverage (any shape): 15 sq. ft.
- Zero Electromagnetic Field. No interference with electronic devices in the house.
- Installation-friendly 10′ armored lead wires are pre-attached to only one end of heating mat.
- Made in the USA with Lifetime Warranty, UL listed and we ship same or next business day.
120 sq.ft. 240-Volt. Ceramic & Stone Tile Electric Floor Heating Kit w/Honeywell Floor Thermostat and Installation Alarm, (80 ft. x 1.5 ft.) – Other Sizes Available
- 120 sq. ft. Under Tile Electric Floor Heating Mat
- Honeywell 120/240-Volt manual floor digital thermostat with 5mA GFCI and 15′ floor temperature sensor.
- InstAlarm Installation Monitor for peace-of-mind.
- Fast and easy to install. Self-adheres to the subfloor. Cut mesh and turn heating mat to fit the heated area.
- Lifetime heating mat technical support.
WarmWalk electric radiant floor heating mats are designed for fast and easy installation under ceramic tile, marble, porcelain and stone. WarmWalk heating mats are particularly advantageous compared to labor intensive hydronic and electric cable systems where water pipes or electric cables must be spaced by hand across the whole floor. What’s more, WarmWalk eliminates electro-magnetic field (EMF) so there is no worry about interference with electric devices. WarmWalk is made in the USA with the most advanced technology available. It is even UL listed for installation in showers!
WarmWalk saves installation cost. Most radiant floor heating systems must be embedded in thick-set cement mortar before laying the finished floor. Not WarmWalk! The 1/8” thin heating cable minimizes floor height and the amount of cement used!
WarmWalk reduces installation time. Some electric radiant floor heating systems must be expensively custom fit. Other systems come in static lengths and widths that may not fit the floor dimension, causing cold spots. Still other systems require complicated electrical connections. Not WarmWalk! WarmWalk’s standard sized mats are stocked for sale and easy on-site fitment to any floor. WarmWalk’s heating cable is factory spaced on rolls of fiberglass mesh. Simply roll out the mats and cut the mesh to turn WarmWalk in any direction to fit the floor. No on-site splice connections or special tools are necessary. The factory-attached, hermetically sealed lead wires connect to standard household Voltage. Both 120V and 240V systems are available.
WarmWalk installs on virtually any subfloor and under any floor covering. WarmWalk can meet the heating demands of almost any floor. Besides being ideally suited for all types of tile, marble, porcelain and stone floors, WarmWalk can be installed under carpet, vinyl, laminate and wood floors when imbedded in a layer of self-leveling cement.
90 sq. ft. ThermoFloor Laminate Floor Heating Kit: (3) 3×10 ft. mat, (1) TH114 Manual Thermostat
- Kit includes (3) Floor Heating Mats and (1) Manual Thermostat
- THERMOFLOOR HEATED UNDERLAYMENT: A 3-in-1 (heating, insulating, noise reducing) radiant floor heating underlayment specifically designed for laminate, glue-down and floating hardwood, and engineered wood floors. Made with patented FiberThermics heating elements, the safest and most advanced technology in the floor heating industry, ThermoFloor can be installed with peace of mind directly under laminate and wood floors.
- AUBE MANUAL THERMOSTAT: A universal floor heating thermostat built for simple installation and easy use. This thermostat comes with a 15’ floor temperature sensor for accurate and reliable radiant temperature readings. With three temperature control modes and an ON/Standby switch, it is easy to dial in the right temperature for your floors or turn off heating when you don’t need it.
- QUICK AND EASY INSTALLATION: The system combines radiant floor heating with an upgraded laminate flooring underlayment. To install simply roll out the heated underlayment, lay the laminate flooring, and connect to the included thermostat. With ThermoFloor laminate and wood floor heating systems, you can add warmth where you need it most – near the floor, not the ceiling. There is no easier or faster way to install a heated floor!
- MULTIPLE SIZES AVAILABLE TO FIT YOUR ROOM: While ThermoFloor is a versatile system designed for many heating applications, the mats cannot be cut to fit a smaller area. We offer a wide range of kit sizes so that you can find the perfect kit for your home. Make sure to pre-measure your desired heating area and select the appropriate kit size. We are here to help if you need any assistance, so please reach out to our Support team if you need any help deciding the appropriate system for you.
ThermoFloor is a 4-in-1 (heating, insulating, noise suppressing, underlayment) radiant floor heating underlayment specifically designed for laminate, glue-down and floating hardwood and engineered wood floors.
It comes with the following features and benefits:
-
Subfloor thermal insulation (R=0.5).
-
Laminate floor noise reduction (FIIC=60).
-
Anti-microbial resistance to mold and mildew.
-
Can be used with laminate flooring with attached underlayment backing.
Simply roll out the heated underlayment and lay the laminate flooring. Factory-attached 20’ lead wires on only one end of the underlayment Mat facilitates electrical connections. Listed in compliance with UL Standards for the U.S. and Canada. Factory-direct prices and support.
With ThermoFloor laminate and wood floor heating systems you can add warmth where you need it most – near the floor, not the ceiling. There is no easier and quicker way to install a heated floor!
9 sq. ft, 120V. in-Floor Heated Mat for Engineered and Solid Hardwood Floor Heating (3.0 ft. x 3 ft.) WarmStep Model WS3003-120 – Multiple Sizes Available
- Simple install using same method as floor covering. Approved for use with floors that are installed using glue, nails, fasteners or floating floors.
- No need for cement or mortar
- Provides all the health advantages of radiant heat: No drafts, blowing of dust, dirt or allergens.
- Saves energy up to 40% over convection type heating systems.
- Lasts for the life of the floor, once properly installed and operated.
60 sq.ft. 120-Volt. Ceramic & Stone Tile Electric Floor Heating Kit w/Honeywell Floor Thermostat and Installation Alarm, (40 ft. x 1.5 ft.) – Other Sizes Available
- 60 sq. ft. Under Tile Electric Floor Heating Mat
- Honeywell 120/240-Volt manual floor digital thermostat with 5mA GFCI and 15′ floor temperature sensor.
- InstAlarm Installation Monitor for peace-of-mind.
- Fast and easy to install. Self-adheres to the subfloor. Cut mesh and turn heating mat to fit the heated area.
- Lifetime heating mat technical support.
WarmWalk electric radiant floor heating mats are designed for fast and easy installation under ceramic tile, marble, porcelain and stone. WarmWalk heating mats are particularly advantageous compared to labor intensive hydronic and electric cable systems where water pipes or electric cables must be spaced by hand across the whole floor. What’s more, WarmWalk eliminates electro-magnetic field (EMF) so there is no worry about interference with electric devices. WarmWalk is made in the USA with the most advanced technology available. It is even UL listed for installation in showers!
WarmWalk saves installation cost. Most radiant floor heating systems must be embedded in thick-set cement mortar before laying the finished floor. Not WarmWalk! The 1/8” thin heating cable minimizes floor height and the amount of cement used!
WarmWalk reduces installation time. Some electric radiant floor heating systems must be expensively custom fit. Other systems come in static lengths and widths that may not fit the floor dimension, causing cold spots. Still other systems require complicated electrical connections. Not WarmWalk! WarmWalk’s standard sized mats are stocked for sale and easy on-site fitment to any floor. WarmWalk’s heating cable is factory spaced on rolls of fiberglass mesh. Simply roll out the mats and cut the mesh to turn WarmWalk in any direction to fit the floor. No on-site splice connections or special tools are necessary. The factory-attached, hermetically sealed lead wires connect to standard household Voltage. Both 120V and 240V systems are available.
WarmWalk installs on virtually any subfloor and under any floor covering. WarmWalk can meet the heating demands of almost any floor. Besides being ideally suited for all types of tile, marble, porcelain and stone floors, WarmWalk can be installed under carpet, vinyl, laminate and wood floors when imbedded in a layer of self-leveling cement.
15 sq. ft. WarmStep Wood Floor Heating Kit: (1) 3×5 ft. mat, (1) UDG4-4999 programmable Thermostat
- Kit includes (1) Floor Heating Mat and (1) Programmable Touch Screen Thermostat
- WARMSTEP IN-FLOOR HEATING MAT: A simple-to-install, electric floor heating mat specifically designed for engineered and solid hardwood floors. WarmStep enhances new floor installations by adding superior radiant floor heating in just a few steps, and the ultra-thin construction allows the system to be added to virtually any flooring project. WarmStep can be installed with peace of mind directly under wood floors, and lasts for the life of the floor once properly installed.
- OJ TOUCHSCREEN THERMOSTAT: An industry-leading floor heating thermostat built with the end user in mind. This 3.5” full-color universal touch screen thermostat comes with a 15’ floor temperature sensor for accurate and reliable radiant temperature readings. For on-the-go control, check out the WiFi version of this thermostat for mobile app compability.
- QUICK AND EASY INSTALLATION: No need for cement or mortar, WarmStep installs using the same method as the floor covering and is approved for use with floating, glued, nailed, or fastened floors. To install simply roll out the floor heating mat, lay the wood flooring, and connect to the included thermostat. With WarmStep wood floor heating systems, you can add warmth where you need it most – near the floor, not the ceiling. There is no easier or faster way to install a heated floor!
- MULTIPLE SIZES AVAILABLE TO FIT YOUR ROOM: While ThermoFloor is a versatile system designed for many heating applications, the mats cannot be cut to fit a smaller area. We offer a wide range of kit sizes so that you can find the perfect kit for your home. Make sure to pre-measure your desired heating area and select the appropriate kit size. We are here to help if you need any assistance, so please reach out to our Support team if you need any help deciding the appropriate system for you.
50 Sqft Cable Set, Electric Radiant Floor Heat Heating System with Aube Digital Floor Sensing Thermostat
- 50 Square Foot Under Tile Heating “Cable Set” (spool of wire), 120 Volts
- Highest Quality Heating Cable, Twisted Pair for Zero EMF, Single Cold Lead, Very Thin, 1/8″ thk
- Wire is laid out 3″ apart acroos the area to heat. Allows easy heating of odd shapes
- Includes Honeywell/Aube Digital Floor Sensing Thermostat with Floor Sensor Wire(model TH115-AF-120S)
- Includes installation monitor and plastic cable guides to secure wire to floor. UL LISTED for USA and Canada.
18 sq. ft, 240V. in-Floor Heated Mat for Engineered and Solid Hardwood Floor Heating (3.0 ft. x 6 ft.) WarmStep Model WS3006-240 – Multiple Sizes Available
- Simple install using same method as floor covering. Approved for use with floors that are installed using glue, nails, fasteners or floating floors.
- No need for cement or mortar
- Provides all the health advantages of radiant heat: No drafts, blowing of dust, dirt or allergens.
- Saves energy up to 40% over convection type heating systems.
- Lasts for the life of the floor, once properly installed and operated.
Conclusion
By our suggestions above, we hope that you can found thermosoft floor heating kit for you.Please don’t forget to share your experience by comment in this post. Thank you!
