Which Is The Best Rigid Liquid Cooling Tubing

Deal Score0
Deal Score0
  • Which Is The Best Rigid Liquid Cooling Tubing
  • Which Is The Best Rigid Liquid Cooling Tubing
  • Which Is The Best Rigid Liquid Cooling Tubing
  • Which Is The Best Rigid Liquid Cooling Tubing
  • Which Is The Best Rigid Liquid Cooling Tubing
  • Which Is The Best Rigid Liquid Cooling Tubing
  • Which Is The Best Rigid Liquid Cooling Tubing
  • Which Is The Best Rigid Liquid Cooling Tubing
  • Which Is The Best Rigid Liquid Cooling Tubing
  • Which Is The Best Rigid Liquid Cooling Tubing

Nowadays, there are so many products of rigid liquid cooling tubing in the market and you are wondering to choose a best one. You have searched for rigid liquid cooling tubing in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings rigid liquid cooling tubing which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

Best results for rigid liquid cooling tubing

Thermaltake Pacific DIY OD 16mm (5/8") x ID 12mm (1/2") Water Cooling PETG Hard Tube Bending Kit CL-W093-AL00BL-A

$41.99$59.99$77.39
Last update was on: Sunday, December 29, 2019

Thermaltake Pacific DIY LCS 1000mm Lengths V-Tubler PETG Hard Tubing (4-Pack) OD 16mm (5/8") x ID 12mm (1/2") CL-W116-PL16TR-A

$16.79$23.99$27.11
Last update was on: Sunday, December 29, 2019

Size:1000mm |  Style:PETG Hard Tube

Thermaltake introduces the V-Tubler PETG (4-Pack) hard tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with an 16mm OD / 12mm ID tube size, the PETG tube easily secures to 16mm fittings to give users better mounting, fitting, and flow. Make your pipe dreams a reality with endless possibilities to connect your vital components together for an unrivaled presentation.

Thermaltake introduces the V-Tubler PETG solid tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with 5/8” (16mm) OD PETG tube adapter fittings, give users better mounting, easier fitting, and ideal flow. Choose from: 500mm and 1000mm to make your system a showcase for all to see with the Thermaltake V-Tubler water tubing.

  • Material: PETG
  • Inside Diameter: 12 mm
  • Outside Diameter: 16 mm (5/8”)
  • Length: 100 cm *4
  • Color: Transparent

Similar items with 4 stars and above

PrimoChill Rigid Tubing 45/90/180 Degree Water Cooling Bending Kit – 1/2 in. OD

$9.07$12.95$17.61
Last update was on: Sunday, December 29, 2019

Now making custom bends with rigid tubing could not be easier. With the PrimoChill Rigid Tubing 45/90/180 Degree Bending Kit – 1/2 in. OD you can make consistent bends every time!  Once your tube is heated (PETG or Acrylic) you can mold the tube using this bending tool for angles of any size.  These tool has mount holes that allow you to mount to a hard surface for a more permanent work station.
Features

  • Works w/ 12mm and 1/2in. OD Tubing
  • Designed For Perfect Bends
  • Specifications
    Compatibility

  • Size:1/2 in. OD and 12mm OD rigid tubing (up to 14mm)
  • Compatible Material: PETG, PMMA, Copper
  • Parts Included

  • 1x PrimoChill Rigid Tubing 45 Degree Bending Tool – 1/2 in. OD
  • 1x PrimoChill Rigid Tubing 90 Degree Bending Tool – 1/2 in. OD
  • 1x PrimoChill Rigid Tubing 180 Degree Bending Tool – 1/2 in. OD
  • Warnings
    Practice using the bending tool on some scrap rigid until you get the hang of how best to use it!
    PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

    Bitspower G1/4" to Enhance Multi-Link Fitting for 12mm OD Rigid Tubing (for Use with Bitspower Rigid Tubing Only), Deluxe White, 4-Pack

    $35.69$50.99$63.23
    Last update was on: Sunday, December 29, 2019

    Color:Deluxe White

    G1/4″ to Enhance Multi-Link Fitting allows connection with Bitspower Crystal Link hard tubing. For use with Bitspower rigid tubing only.

    Model: TR-BP-DWEML-4P

    Similar items with 4 stars and above

    Thermaltake Pacific Black 4 Build-in O-Rings C-Pro G1/4 PETG 16mm OD Compression Fitting 6 Pack CL-W214-CU00BL-B

    $38.12$54.46$63.72
    Last update was on: Sunday, December 29, 2019

    Size:Six Pack |  Color:Black

    The Pacific C-Pro Series is a revolution in fitment design. It simplifies the process of setting up a custom liquid-cooling loop and provides a seal that outperforms traditional compression fittings. By using 4 preinstalled O-rings and an overhauled design, the C-Pro Series is the new standard in fitment technology and it is exclusive to Thermaltake.

    P/N: CL-W214-CU00BL-B

    Model: Pacific C-Pro G1/4 PETG 16mm OD 6 Pack – Black

    Dimension: D26 x 21 (H) (mm)

    Applicable: OD : 16 mm

    Weight : 320 g

    Material: CU + AL

    Screw Thread: G 1/4

    Note: PETG Tube to G1/4

    Similar items with 4 stars and above

    XSPC G1/4" to 10mm ID, 14mm OD Rigid Tubing Fitting (For use with XSPC Metal & PETG Tubing Only), Black Chrome, 12-pack

    $44.09$62.99$85.67
    Last update was on: Sunday, December 29, 2019

    Color:Black Chrome

    XSPC Rigid Tubing Fittings are designed for 14mm PETG tubing and 14mm metal tubing. The fittings have two push seals and an additional compression seal for a safe and secure connection. Only for use with XSPC 14mm PETG and Rigid Tubing Fittings.

    Model: TR-5060175589545-12P

    Similar items with 4 stars and above

    XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

    $15.39$21.98$25.5
    Last update was on: Sunday, December 29, 2019

    XSPC PETG Tool Kit to bend and cut PETG tubing.Includes Heavy Duty Hose Cutter, PETG Easy Bending Tool, Bending Rubber, PETG Chamfer Tool, and PETG Edging Sandpaper.For use with XSPC branded PETG tubing.May not be compatible with other branded PETG products.

    PrimoFlex Advanced LRT 3/8in. ID x 1/2in. OD Tubing Bundle (10ft Pack) – Crystal Clear (10ft Pack)

    $18.87$26.95$32.07
    Last update was on: Sunday, December 29, 2019

    PrimoFlex Advanced LRT Tubing has been designed, formulated, and manufactured for today’s evolving standards in the PC water cooling industry. Advanced LRT has been carefully formulated to perform in a wide range of closed loop cooling systems, creating the most compatible water cooling tubing ever created.
    SysPrep & Liquid Utopia INCLUDED
    Included in the package at no additional cost is a 15mL bottle of SysPrep – Cooling Loop Pre-Treatment as well as a 15mL bottle of Liquid Utopia. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep. It will “flush” your loop and its components of any debris left by the manufacturing processes of your reservoir, block, pump, or radiator, leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. Once your LRT tubing is crystal clear the Liquid Utopia offers a full line of protection against algae and corrosion.
    Warnings/Cautions: With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Advanced LRT is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.Tubing will stain if dyed coolants are used. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

    EKWB EK-DuraClear Soft Tubing, 12/16mm (7/16" ID, 5/8" OD), 3 Meter, Clear

    $16.09$22.99$33.8
    Last update was on: Sunday, December 29, 2019

    EK-DuraClear is the most advanced liquid cooling tubing, designed and manufactured for the most demanding customers, who want to use soft tubing in their builds. The EK-DuraClear structure is formulated to enable it to perform in a wide range of closed loop cooling systems, making it the top choice for every liquid cooling enthusiast.

    Our top priority during the development of this tube was the prevention of bacterial growth on the tubing wall. To eliminate this problem, EK-DuraClear has very smooth inner walls that prevent any kind of bacterial adhesion. Tested in the most extreme environments, the EK-DuraClear is guaranteed to withstand far worse conditions that would ever appear in the everyday use.

    One of the most important features that the soft tube should have is the flexibility and good bend ratio without kinks. EK-DuraClear has one of the best bend ratios on the market. Doing a tight turn in your liquid cooling build has never been easier! Tighter bends without kinking will allow you to have no reduction in cooling performance whatsoever.

    Unlike the matte black EK ZMT Tube, EK-DuraClear is a transparent tube, designed to be used with EK-Ekoolant cooling liquids. Colored liquid realy gives your build a touch of personality and there is nothing more beautiful than matching colors of liquid with your hardware.

    Features:
    – Highly durable
    – Transparent
    – UV Resistant
    – Logo Free (no print on tube)
    – Inner Wall resilience
    – Environmentally responsible, safe and non-toxic product

    Technical Specifications:
    – Material: PVC
    – Color: Clear, not UV-reactive (resistant to UVA & UVB)
    – Length: 3 meters
    – Operating temperature range: -20°C to 80°C

    Dimensions:
    – Internal diameter (ID): 11,1 mm (7/16″)
    – Outer diameter (OD): 15,9 mm (5/8″)

    Model: 3831109850985

    EKWB EK-HTC Classic Compression Fitting for EK Rigid Tubing, 14mm OD, Black, 4-Pack

    $20.29$28.99$42.33
    Last update was on: Sunday, December 29, 2019

    Color:Black

    EK-HTC Classic 14 (Hard Tubing Compression) Fittings are 14mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a high-quality finish, the EK-HTC Classic Fittings are an aesthetically appealing and secure option for your custom loop liquid cooling system. A non-intrusive, minimalistic look, with NO added branding at all.

    The locking ring prevents solid tube to be pulled out of the fitting by compressing the rubber gasket underneath the ring. EK-HTC Classic fittings are available in the three most popular color options such as nickel, black and black nickel.

    The barb and the ring are made of CNC machined brass and the seal is made quality rubber O-rings.

    The base fitting surface is smooth and has no adequate gripping surface, but the inside of the bard is socketed with a 9mm hex Allen key pattern. It’s highly recommended to use an Allen Key 9mm (purchased separately) to prevent skin damage to the fingertips while installing the fitting. Please, be advised not to use excessive force when attaching fitting barbs using Allen Key 9mm in order to prevent damage to other liquid cooling products!

    These fittings have guaranteed compatible with all other EK Water Blocks liquid cooling products.

    Technical data:

    – Thread: G1/4″ BSP; 4.5mm male thread length
    – Supported tube: 14mm OD
    – Outer diameter of a fitting: 21mm
    – Installed height: 12.5mm
    – Compatible solid tubing: Acrylic, PETG, Copper, Brass, Stainless Steel

    PLEASE NOTE:

    • It’s mandatory to use this fitting only with the correct sized tubing!
    • Do not use excessive force when installing barbs, the water block could be damaged.
    • Do not use any tools to secure the locking ring to the fitting barb.
    • This product should NOT be installed with any aluminum Fluid Gaming parts.

    Model: TR-3831109818107-4P

    Similar items with 4 stars and above

    Conclusion

    By our suggestions above, we hope that you can found rigid liquid cooling tubing for you.Please don’t forget to share your experience by comment in this post. Thank you!

    10 Total Score
    Excellent

    Best rigid liquid cooling tubing: Top-Rated Brands & What to Buy

    User Rating: 4.04 (761 votes)