hometechfocus 
Nowadays, there are so many products of rasperry pi 4 copper cooling in the market and you are wondering to choose a best one. You have searched for rasperry pi 4 copper cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings rasperry pi 4 copper cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Lanpu 30 PCS Raspberry Pi Heatsink Kit Copper Raspberry Pi Aluminum Heatsink for cooling cooler Raspberry Pi 3, Pi 2, Pi Model B+
- Package includes 20 black anodized aluminum & 10 copper heatsink
- Suitable for Raspberry Pi models A, B, B+, 2, and 3 boards
- Can be applied with other devices for cooling VGA RAM, IC Chips, Mosfet SCR, Southbridge , Northbridge etc
- Adhesive thermal tape backing, Raspberry pi not included
- These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases.
30 PCS Raspberry Pi Heatsink Kit
Package Includes:
10 PCS Raspberry Pi black anodized aluminum copper heatsink, 0.56 x 0.56 x 0.27 inch (14 x 14 x 7mm (L*W*H)
10 PCS Raspberry Pi black anodized aluminum copper heatsink, 0.35 x 0.35 x 0.19 inch (8.8 x 8.8 x 5 mm) (L*W*H)
10 PCS Raspberry Pi copper heatsink, 0.59 x 0.59 x 0.02 inch (15 x 15 x 0.5mm (L*W*H))
Product Feature:
– These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases.
– These heat sinks kit can be applied in other devices to cool processor, regulators, VGA RAM, IC Chips, Mosfet SCR, Southbridge, Northbridge etc.
– Suitable for Raspberry Pi models A, B, B+, 2, and 3 boards
– Raspberry pi not included
Pastall Raspberry Pi Heat Sink Cooler and Copper Heatsink for Raspberry Pi B B+ 2/3/4, Heatsink Copper Pad Shims with Adhesive Tape (4copper+16aluminum)
- ❤ Fits for Raspberry Pi models A, B, B+, 2, 3 ,4 boards, compatible with most Raspberry Pi cases.
- ❤ Package included :16 pcs aluminum heatsink + 4 pcs copper heatsink
- ❤ Adhesive tape backing. Easy peel and strong sticky.
- ❤ These heatsinks have good performance on heat dissipation and long lasting.
- ❤ Also could be used with other devices such as the Beaglebone.
Product description
20 PCS High Performance Raspberry Pi Heatsink Kit Aluminum Heatsink for Raspberry Pi B B+ 2, 3, 4,Heatsink Copper Pad Shims, with thermal conductive adhesive tape.
Package Includes:
8 pieces – 9mm x 9mm x 5mm aluminum heat sinks
4 pieces – 14mm x 14mm x 7mm aluminum heat sink
4 pieces – 14mm x 5mm x 5mm aluminum heat sink
6 pieces – 15mm x 15mm x 1mm copper heat sink
Supported Boards:
Raspberry Pi models A, B, B+, 2, 3, 4 boards
Product Features:
30 pieces set of heatsinks for the Raspberry Pi models B, B+, 2, 3, 4.
Reduces CPU and LAN Temperature in Enclosed and Overclocked Environments.
Heatsinks are with thermal conductive adhesive tape on the back.
Can be used with other devices such as the Beaglebone to cool processors, regulators, etc.
These heatsinks are long lasting and have good performance on heat dissipation.
Notice: Heatsink kits are small parts, please keep out of the reach of children!
iUniker Raspberry Pi 4 Fan, Raspberry Pi Dual Fan with Raspberry Pi Heatsink, Raspberry Pi Fan for Raspberry Pi 4 Model B, 3B+/Pi 3 B/Pi 2 B
- NOTICE: It can’t fit Retroflag Nespi Case and Case+, if you want use our dual fan in this case, you should modifiy the Retroflag Case and breaking the tabs on the single fan location.
- Efficient drop temp of your Pi by using our heatsink fan.
- Custom size fan can fit most of the raspberry Pi case.
- Custom 3M heat conductive strip can make sure you Pi works stable when you are overclocking.
- Upgrade bearing of this fan not only can make sure outputing a lot of wind,but also quiet enough.
Raspberry Pi Heatsink, iUniker All Copper Heatsink NEW DESIGN SIZE Cooling Kit with 8810 Thermal Conductive Adhesive Tape for Raspberry Pi 3 B+, Raspberry Pi 3 B, Pi 2 B
- NEW DESIGN SIZE for Raspberry Pi, Perfect suitable for Raspberry Pi 3 B+, Raspberry Pi 3 B, Raspberry Pi 2 B,Raspberry Pi B+
- Much More Better Heat Conduction Effect than Aluminum Heatsink
- Adhesive thermal tape on the back
- Can be applied with other devices such as BeagleBone
- We are using 8810 Thermal Tape on this heatsink
All New Design Size, Perfect fit Raspberry Pi 3 B+, Raspberry Pi 3 B, Pi 2 B, Pi B+
Package Include:
3x Copper Heatsink with Thermal Tape
GeeekPi Raspberry Pi 3 B+ Cooling Fan, Raspberry Pi Aluminum Heatsink Cooling Kit for Raspberry Pi 3B+ (B Plus)
- Compatible with Raspberry Pi 3 B+（B Plus）
- It’s compatible with most of cases in the market
- Use CNC Machining manufacturing technology for Aluminum heatsink
- With 2pcs little thermal tapes to attach to the CPU and LAN tightly for better dissipation
- The cooling fan updated to 3510 version and it will be more quiet and powerful for heat dissipation of Raspberry Pi Board
- NOTE:Raspberry Pi Board Not Included!
- Package Includes: 1x Cooling Kit( Aluminum Heatsink with Cooling Fan), 1x Think Copper Heatsink, 2x Thermal Tapes
Extreme Cooling Fan Kit For Raspberry Pi 3B+
Description
3510 Version Extreme Cooling Fan Kit For Raspberry Pi 3B+ is a brandnew Cooling system for your Raspberry Pi 3B+.
It’s a completely new radiator, and it’s a very cool cooling system after the armor shell.
The fan is 3510 version and more powerful but still quite when it is running.
Two aluminum blocks will touch the MCU tightly and good for the heat dissipation.
It’s with good-looking appearance, and easy to assemble.
Package Includes
1x Cooling Kit( Aluminum Heatsink with Cooling Fan)
1x Thin Copper Heatsink
2x Thermal Tapes
DAOKI 15 PCS One Set Aluminum Heatsink Cooler Adhesive Kit Sink for Cooling Raspberry Pi
- The Heatsink have a layer of adhesive on the back of them.
- Simply peel the adhesive off and stick onto your board
- This heatsink set is specially designed for Raspberry Pi, it’s function is to cool down the board and make your Raspberry operate safely
- Reduce the risk of hardware failure because of overheating
- Package included: 5 set of aluminum heatsink (3pcs)
Description:
The Heatsink have a layer of adhesive on the back of them.
Simply peel the adhesive off and stick onto your board
This heatsink set is specially designed for Raspberry Pi, it’s function is to cool down the board and make your Raspberry operate safely
Reduce the risk of hardware failure because of overheating
Install instructions:
Make sure the chip modules are free from dirt and grease
Peel the protective liner on the base of the heatsink
Affix the heatsinks on the chip modules and apply firm pressure
One set of aluminum heatsink (3pcs):
1 x 14mm(L) x 14mm(W) x 5mm(H) Heatsink for Soc
1 x 9mm(L) x 9mm(W) x 4mm(H) Heatsink for Voltage Regulator
1 x 9mm(L) x 9mm(W) x 4mm(H) Heatsink for LAN9512
Package included:
5 set of aluminum heatsink (3pcs)
Raspberry Pi Kit, Aokin Raspberry Pi Cooling Fan 30x30x7mm Brushless CPU Cooling Fan and Raspberry Pi Heatsink Set 1 Aluminum + 2 Copper for Raspberry Pi 3 B+, Pi 3 B, Pi 2 B, RetroFlag NESPI Case
- Fan Connector: 2 pins, Rated Voltage: DC 5V, Working Voltage: DC 3.0-5.8 V.
- Fits perfectly for Raspberry Pi 3 Model B+, Pi 3 Model B, Pi 2 Model B, RetroFlag NESPI Case.
- Easy to install the fan by screws (length: 15 mm), the heat sinks with adhesive on the back for efficient thermal transfer.
- The cooling fan runs smoothly, work almost noiseless and meet your daily requirements, can keep CPU safe without overheating.
- 1 x Cool Fan Size (L x W x H): Approximately 30 x 30 x 7 mm + 3 x heatsinks lower your CPU/LAN/RAM chips temp well, Wire Length: 75 mm.
Heat Sink Feature:
Material: 1 x Aluminum, 2 x Copper
Short enough to fit within standard Raspberry Pi cases.
Include adhesive real thermal tape for efficient thermal transfer.
Dimensions:
90x70x120 mm (L*W*H)
120x130x50 mm (L*W*H)
120x120x10 mm (L*W*H)
Cooling Fan Feature:
Color: Black
Current: 0.1 A
Connector: 2 pin
Wire Length: 75 mm
Working Voltage: DC 3.0-5.8 V
Size (L x W x H): 30 x 30 x 7 mm
Airflow: 5 m³/h
Bearing Type: Sleeve
Speed: 6000 RPM ± 10%
Noise Level: 16 dB ± 10%
Package Included:
1 pcs Copper Heat Sink
1 pcs Copper Heat Sink
1 pcs Aluminum Heat Sink
1 pcs Cooling Fan
1 pcs Screw Sets
Use for Raspberry Pi 3B+/3B/2B, NESPI Case, Orange Pi etc.
This is new mode fan for raspberry pi, since the fan is powerful, so it will be a little noisy (10~15dB) but reduce heat better when you connect to the 5V voltage, if you feel it is noisy, please connect the fan to 3.3V voltage of your Pi, the fan work almost noiseless in 3.3V and meet your daily requirements.
Many thanks for your understanding, If there are any questions, please feel free to contact us via Amazon, we will do our best for you.
Dorhea Raspberry Pi 3 b+ Display 3.5 inch TFT LCD Screen Kit, 3.5” 480×320 Resolution TFT Touch Screen Moudle with Protective Case Touch Pen Heatsinks for Raspberry Pi 3 B+,Pi 3 B, Pi 2, Pi Zero
- 3.5 inch HD touch screen designed for Raspberry Pi 3B 2B/B+/A+ /A/B Zero, 320*480 resolution, better display with TFT LCD Display touch screen panel, No external power supply needed
- Raspberry Pi Case : Protective case design for Raspberry Pi 2 model B and Raspberry Pi 3 model B,protects your raspberry from scratches and damage, this case is easy to install and has good ventilation
- Copper & Aluminum Heatsink : 3 Copper & Aluminum heatsinks make sure your pi works stable,size perfectly matched with paspberry pi ,heatsink to cooling down CPU ,LAN ,VRAM, VGA, RAM, IC Chips, MOSFET SCR, Southbridge ,Northbridge etc
- Compatible With : Suitable for Raspberry Pi 3 Model B+,Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B+ . Access to all controls and features
- Note : Raspbery Pi 3 or Raspberry Pi 2 model B was not included,detailed tutorials can be provide for free http://www.lcdwiki.com/3.5inch_RPi_Display
Installing the drivers can refer to the following link or text description
http://www.lcdwiki.com/3.5inch_RPi_Display
Step 1,
install the official Raspbian or UbuntuMate image
Download the latest Raspbian image from the official
https://www.raspberrypi.org/downloads/
Download the latest Ubuntu Mate image from the official
https://ubuntu-mate.org/download/
Format the Micro SD card using SDFormatter,
Use Win32DiskImager to burn the official image to the Micro SD card.
Step 2,
install the LCD driver
Method 1: Online installation (Raspberry Pi needs to connect to the Internet)
Use the Putty connection to log in to the Raspberry Pi system to the user command line (initial username: pi password: raspberry)
Execute the following command (after copying, click the right mouse button in the Putty window to paste):
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD35-show
Method 2: Offline installation
1. Download from the website or copy the “LCD-show.tar.gz” driver from the CD to the root directory of the Raspberry Pi system card
(Recommended Step 1 After copying, copy the driver directly to the Micro SD card, or use SFTP to copy it remotely)
2. Execute the following command to extract the installation driver:
cd /boot
sudo tar zxvf LCD-show.tar.gz
cd LCD-show/
sudo ./LCD35-show
Suitable for Raspberry Pi B / Raspberry Pi B+ / Raspberry Pi A+ / Raspberry Pi 2 and Pi 3 Model B / Raspberry Pi 3 B+
Package Included:
1 X 3.5”Raspberry Pi LCD Display
1 X Case for Raspberry Pi 2/ 3 Model B / B+
3 X Heatsinks
GeeekPi Acrylic Case for Raspberry Pi 4 Model B, Raspberry Pi Case with Cooling Fan Raspberry Pi Heatsinks for Raspberry Pi 4 Model B(Only for Pi 4) (Black and Clear)
- Only For Raspberry Pi 4 Model B
- If you need this case with power supply, pls check it here https://www.amazon.com/dp/B07WR9MMKT?ref=myi_title_dp
- The latest version of 9 layers acrylic case with good appearance
- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD CARD slot.
- The DC5V 2 pin quite cooling fan and heatsinks are good for heat dissipation of Raspberry Pi board.
- The package comes a screwdriver for you to install this case easily.
- Package Includes: 1x 9 layers acrylic case, 1x Cooling Fan, 4x Heatsinks,1x Screwdriver, 1x Screw Set
40 PCS Raspberry Pi Heatsink Kit by Lanpu, High Performance Aluminum Heatsink for Raspberry Pi B B+ 2 and 3, Heatsink Copper Pad Shims, with Thermal Conductive Adhesive Tape
- ⭐ Includes 30 pcs aluminum heatsink + 10 pcs copper heatsink
- ⭐ Fits for Raspberry Pi models A, B, B+, 2, and 3 boards, Will fit with most Raspberry Pi cases
- ⭐ Thermal conductive adhesive tape backing. Peel and stick in the orientation with the most airflow.
- ⭐ These heatsinks have good performance on heat dissipation and long lasting.
- ⭐ Can be used with other devices such as the Beaglebone. Raspberry pi not included
40 PCS High Performance Raspberry Pi Heatsink Kit Aluminum Heatsink for Raspberry Pi B B+ 2 and 3,
Heatsink Copper Pad Shims, with thermal conductive adhesive tape
Package Includes:
20 pieces – 8.8mm x 8.8mm x 5mm (0.35in x 0.35in x 0.20in) aluminum heat sinks
10 pieces – 14mm x 14mm x 6mm (0.55in x 0.55in x 0.24in) aluminum heat sink
10 pieces – 15mm x 15mm x 1mm (0.6in x 0.6in x 0.04in) copper heat sink
Supported Boards:
Raspberry Pi models A, B, B+, 2, and 3 boards
Product Features:
40 pieces set of heatsinks for the Raspberry Pi models B, B+, 2, and 3.
Reduces CPU and LAN Temperature in Enclosed and Overclocked Environments.
Heatsinks are with thermal conductive adhesive tape on the back.
Can be used with other devices such as the Beaglebone to cool processors, regulators, etc.
These heatsinks are long lasting and have good performance on heat dissipation.
Notice:
Heatsink kits are small parts, please keep out of the reach of children!
Conclusion
By our suggestions above, we hope that you can found rasperry pi 4 copper cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!
