The 9 Best Rasberry Pi Cooling Fan

(The Same Case Kit for RPI 4, please go to: http://www.amazon.com/dp/B07TTN1M7G)
This is 9 layers case for raspberry pi 3 model B+, also could compatible with raspberry pi 3 /pi 2 .

Product Feature:
1. All ports are available
Special design is easy to insert/remove SD card, allows Breakout cable, HDMI cable and other ports for RPi access.
2. Better heat dissipation performance
The mute mini cooling fan and aluminum heatsinks have stronger heat radiation while the pi board working.
3. Good quality material
The raspberry pi 3 case with clear acrylic layers is more durable to protect your RPi board!
4. Crystal-like appearance
Clear case is easy to watch the internal state while pi board working to check if all electronic components function normally.

Package Included:
1x Acrylic Case for Raspberry Pi 3 model B+ / 3 / 2
1x Mute Cooling Fan
1x 5V 2.5A Power Supply
3x Aluminum Heat Sinks 14*14*6mm x 2(Large) 9*9*5mm x 1 (small)
4x Metal Screws and Bolts for the case

Related Item:
Miuzei Raspberry Pi 3 B+ Case with Fan (The same case without power supply): http://a.co/1YTEbRO (B07C6CFL2B)
Miuzei Raspberry Pi Camera Module: http://a.co/eBHmA2y (B07BTP8VXL)

Note: Please peel off the protective films on the top and bottom layers before use, the film was tiny and not easily noticeable
Please make sure the layer 3 was installed right, if you installed it 180 degrees backwards, it will make all the difference in the power plug fitting.

(1) Small components inside, please away from young kids below 3yrs.
(2) Kindly to know this case can’t fit for ASUS tinker board.

Any question there, please don’t hesitate to contact us to get support and services via Buyer Message or Q&A

Extreme Cooling Fan Kit For Raspberry Pi 3B+

Description
3510 Version Extreme Cooling Fan Kit For Raspberry Pi 3B+ is a brandnew Cooling system for your Raspberry Pi 3B+.
It’s a completely new radiator, and it’s a very cool cooling system after the armor shell.
The fan is 3510 version and more powerful but still quite when it is running.
Two aluminum blocks will touch the MCU tightly and good for the heat dissipation.
It’s with good-looking appearance, and easy to assemble.

Package Includes
1x Cooling Kit( Aluminum Heatsink with Cooling Fan)
1x Thin Copper Heatsink
2x Thermal Tapes

Description：

– According to Moore’s law, the design of high-speed and high-density printed circuit board (PCB) is becoming more and more complex. Higher processing performance will generate more heat.
– This super ICE Tower CPU Cooling Fan for Raspberry Pi is burned for solving heat dissipation problem!
– Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi.
– In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃.
– Best of all, this super cooling fan support both Raspberry Pi 3 and the new Raspberry Pi 4.
– When the fan turns up, you will see the color of ice. Blue LED lights show the concept of ice, It’s the origin of its name.

Easycargo EDL3007S05 raspberry pi cooling fan is built for low-noise and durable cooling performance. This fan is suitable for Raspberry Pi B / Raspberry Pi B+ / Raspberry Pi A+ / Raspberry Pi 2, Pi 3 model B and B+ and Raspberry Pi 4. The One-to-Two wire connector pins of this fan, can get connected into Raspberry Pi 3.3V or 5V pin to provide optional fan speed and optimum air flow adjustment. This fan can be installed for most of the standard Raspberry Pi cases and also is compatible with RetroFlag NESPI Case.

Specifications:

– Fan Size: 30x30x7.5 mm (LxWxH)

– Wire Length: 2.6 inches (66mm)

– Connector: One-to-Two pin

– Color: Black

– Bearing Type: Hypro Bearing

– Operating Voltage: DC 3.3V – 5V

– Start up Voltage: DC 3V

– Current: 120 mA

– Speed: 5000RPM±15%

– Airflow: 1.79CFM

– Noise Level: 15.92dBA

– Life Time: 30,000 hours

Package Includes: Easycargo EDL3007S05 Raspberry Pi Fan, together with screw and nut set.

Aokin 4pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 4 Pi 2/Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project

Features:

This Pi fan not only support Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, but compatible with other development board.
Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5m³ / h
Number of revolutions: 13200RPM
Noise: 18 dB

Package Including:

4 * pi fan
16 * nuts M2.5
16 * screw M2.5 * 14mm

Product Description:
1. Fan compatible with Raspberry Pi 4 Model B, Pi 3 B+, Pi 3, Pi 2 Model B.
2. Significantly reduce the temperature of the CPU.
3. Almost without any noise.
4. Stable and big wind force.
5. With screws and screw nuts, easy and simple to install.
Package included:

1) Mini fan x1
2) Aluminum heatsinks x4

Product Description

Product Parameters:
Nominal voltage: DC 5V
Current: 0.2A
Size: 65*56*9mm
Compaitable: Raspberry Pi 4B/3B+/3B/2B+/2B/B

Product Performance:
Compatible with multiple versions of Raspberry Pi; All GPIO pins are pulled out, So when the Raspberry Pi is being cooled, its development function will not be affected.
The cooling fan adopts active cooling mode, the heat can be discharged in time. On the other hand, keep the raspberry pi connection to be convenient.
The Expansion board is made of PCB process, it bring the dazzling effect. You could see the LED light from heat sink icon after you finished the installation.
The fan adopts active heat dissipation mode, which is better than passive heat dissipation

Package Including:
1 * Expansion Board with Fan
4 * Copper column(column double pass M2.5*17mm)
9 * Screw(M2.5*5 countersunk screw)

Conclusion

By our suggestions above, we hope that you can found rasberry pi cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!