Best Mor Infrared Heating Elements

Recommended distance of 8″ (200mm) to material being heated.
Heating wire embedded into concave shaped heater creates infrared in focused rays.
12 month warranty against burnout. (Estimated life in excess of 10,000 operational hours.)
CE Approved.
Ceramic tubes over power lead wire within mounting tower increases the dielectric strength between the lead wire and mounting clip preventing a potential fault to ground.

Application usage is almost anywhere a non-contact heat source is needed in industrial process heating applications (heating, curing, cooking, and drying.)

Though ceramic, the elements are fairly rugged and are more durable than quartz, and cleaning is easy, with their splash-proof, non-corrosive, glazed finish, which also makes them the ideal choice for use in food handling, medical facilities, or other antiseptic applications. The large variety of sizes, shapes, and watt densities allows ceramic elements to be highly useful in zoning arrangements such as plastic thermoforming where complex heating patterns are needed.

For best results, the surface temperature of the Mor-Infrared ceramic infrared heater should be controlled using an open-loop (percentage timer) or a closed-loop (thermocouple feedback with digital temperature control) system. The infrared emission intensity is directly related to the surface temperature of the ceramic body.

Ceramic Heaters are mounted with the back side mounting post inserted through a pre-cut hole in a reflector. For best results the reflector should be highly reflective (polished aluminized steel) and capable of withstanding high temperatures.

Recommended distance of 8″ (200mm) to material being heated.
Heating wire embedded into concave shaped heater creates infrared in focused rays.
12 month warranty against burnout. (Estimated life in excess of 10,000 operational hours.)
CE Approved.
Ceramic tubes over power lead wire within mounting tower increases the dielectric strength between the lead wire and mounting clip preventing a potential fault to ground.

Application usage is almost anywhere a non-contact heat source is needed in industrial process heating applications (heating, curing, cooking, and drying.)

Though ceramic, the elements are fairly rugged and are more durable than quartz, and cleaning is easy, with their splash-proof, non-corrosive, glazed finish, which also makes them the ideal choice for use in food handling, medical facilities, or other antiseptic applications. The large variety of sizes, shapes, and watt densities allows ceramic elements to be highly useful in zoning arrangements such as plastic thermoforming where complex heating patterns are needed.

For best results, the surface temperature of the Mor-Infrared ceramic infrared heater should be controlled using an open-loop (percentage timer) or a closed-loop (thermocouple feedback with digital temperature control) system. The infrared emission intensity is directly related to the surface temperature of the ceramic body.

Ceramic Heaters are mounted with the back side mounting post inserted through a pre-cut hole in a reflector. For best results the reflector should be highly reflective (polished aluminized steel) and capable of withstanding high temperatures.

The SK0501W ceiling fan heater is perfect for both residential and commercial buildings. Ideal for bathrooms, the SK not only efficiently heats the room but controls moisture build-up at the same time. Say goodbye to fogged up windows and mirrors! This heater’s grill has rounded corners and no screws. It blends in harmoniously with the ceiling, freeing up wall space. Whether it is installed near your home’s entrance, shower or bay window, it is a sensational backup heating unit when combined to a central system. By adding a wall timer, you can use it on demand. The SK is also a unit of choice in commercial spaces; it remains aesthetic as it is not exposed to vandalism. In addition, it cannot be damaged by wet mops or water splashes since it is out of reach.

Product Description

The Original Multi-Watt steel fin heater and our most popular heater for single family residences and upscale condominiums. King’s exclusive Pic-A-Watt steel fin element allows customers to select from a range of wattage options, tailoring the heater to an area’s specific heating requirements. Perfect for large living areas yet whisper quiet enough for bedrooms. The premium combination of an efficient high-mass steel element and whisper quiet squirrel cage blower, offers top of the class performance and years of trouble-free operation.

From the Manufacturer

The original multi-watt steel fin heater. King’s Pic-A-Watt series “Best” Fan Forced Wall Heater complete with wall can, interior and grill. An excellent upgrade heater. Unique design allows the user to change wattage output by disconnecting color-coded terminals. Contains a steel finned element for long life, a squirrel cage blower for quiet operation, and is equipped with the Patented Smart Limit Protection overheat safety system. The grill with rounded die-formed corners has a crisp clean appearance that blends in with any decor. This heater is frequently used as the primary heating system in apartments and homes, and as supplemental heat in residential and commercial applications. The PAW has a 12 year history of reliability, is made in the USA, and carries a 5-year warranty. It can be used with a built-in (TKIT) or wall-mount thermostat. For best results use with a King electronic line-voltage wall thermostat

Garage/Workshop Heater

Tough, rugged, high-performance – heats quickly.

The DGWH4031 garage heater from Dimplex is perfect for garages, workshops, storage buildings and constructions sites. The powerful fan, 240 volt, 4000 watt stainless steel heater element is the perfect portable heat solution for your needs. With the DGWH4031, Automatic temperature control helps maintain consistent temperatures in your space from 7-25°C (45-77°F). The DGWH4031 also comes with a versatile mounting bracket that allows you to attach this unit to a wall or ceiling, while the heater itself can swivel for direct heat.

You will appreciate the DGWH4031’s fan delay that uses residual heat to work efficiently in saving you money. It also comes with a 6ft cord for added convenience.

Why Choose a Dimplex DGWH4031 heater?

No need to give up beloved hobbies or special projects when the weather turns cold thanks to this rugged heater. For safety and peace of mind, the unit will shut off automatically if airflow becomes restricted for any reason. Housed in durable steel with a powder-coated epoxy finish, the corrosion-resistant garage/workshop heater measures 11 by 7-2/7 by 9 inches.

Dimplex strives to make your home more comfortable and energy-efficient by providing innovative heating solutions. Heating your home should be easy and efficient and Dimplex gives you both while ensuring perfect comfort. Choose from our wide range of styles, heating methods and sizes.

Innovation
As part of the world’s largest manufacturer of electric heating products, Dimplex uses its global research and development resources to create new and innovative heat solutions. The comfort of you and your family drives us to find ways to deliver products like the DGWH4031 with superior performance and exceptional energy efficiency.

Efficiency
With concerns over rising home heating costs have reinforced the need for energy conservation. In response to the need for greater efficiency we created a new family of products including the DGWH4031 that deliver incredible performance with unmatched energy savings.

Superior Quality
The DGWH4031’s premium construction including stainless-steel element and automatic temperature control ensure long product life and protect your investment.

Dedicated Customer Support
The friendly and knowledgeable Dimplex support staff are trained in diagnostics and available to help should you ever require assistance.

Reliable Safety
No Dangerous combustion or harmful carbon monoxide.

Packaged for Shipping
All Dimplex products are subjected to shipping simulation tests to determine the optimum combination of packaging and shipping method to ensure you receive your item in excellent condition.

North American Design and Engineering Excellence
The Dimplex in-house staff of engineers make sure all products meet customer expectations by being well made, easy to assemble, simple to operate, and a pleasure to own. Quality is designed into Dimplex products at every stage of the development process and is ensured by detailed inspections throughout the production cycle.

Dimensions
(W x H x D)11 x 7.2 x 9 inches/ 18 pounds

Key Features

• Garage/Workshop fan-forced heater with 4000Watt stainless-steel element.

• 13, 640 BTU’s; automatic temperature control from 45 to 77°F.

• Fan delay uses residual heat for economical performance; auto safety shut-off.

• Attaches to wall/ceiling with included mounting bracket, heater swivels to direct heat

Recommended distance of 8″ (200mm) to material being heated.
Heating wire embedded into concave shaped heater creates infrared in focused rays.
12 month warranty against burnout. (Estimated life in excess of 10,000 operational hours.)
CE Approved.
Ceramic tubes over power lead wire within mounting tower increases the dielectric strength between the lead wire and mounting clip preventing a potential fault to ground.

Application usage is almost anywhere a non-contact heat source is needed in industrial process heating applications (heating, curing, cooking, and drying.)

Though ceramic, the elements are fairly rugged and are more durable than quartz, and cleaning is easy, with their splash-proof, non-corrosive, glazed finish, which also makes them the ideal choice for use in food handling, medical facilities, or other antiseptic applications. The large variety of sizes, shapes, and watt densities allows ceramic elements to be highly useful in zoning arrangements such as plastic thermoforming where complex heating patterns are needed.

For best results, the surface temperature of the Mor-Infrared ceramic infrared heater should be controlled using an open-loop (percentage timer) or a closed-loop (thermocouple feedback with digital temperature control) system. The infrared emission intensity is directly related to the surface temperature of the ceramic body.

Ceramic Heaters are mounted with the back side mounting post inserted through a pre-cut hole in a reflector. For best results the reflector should be highly reflective (polished aluminized steel) and capable of withstanding high temperatures.

Recommended distance of 8″ (200mm) to material being heated.
Heating wire embedded into concave shaped heater creates infrared in focused rays.
12 month warranty against burnout. (Estimated life in excess of 10,000 operational hours.)
CE Approved.
Ceramic tubes over power lead wire within mounting tower increases the dielectric strength between the lead wire and mounting clip preventing a potential fault to ground.

Application usage is almost anywhere a non-contact heat source is needed in industrial process heating applications (heating, curing, cooking, and drying.)

Though ceramic, the elements are fairly rugged and are more durable than quartz, and cleaning is easy, with their splash-proof, non-corrosive, glazed finish, which also makes them the ideal choice for use in food handling, medical facilities, or other antiseptic applications. The large variety of sizes, shapes, and watt densities allows ceramic elements to be highly useful in zoning arrangements such as plastic thermoforming where complex heating patterns are needed.

For best results, the surface temperature of the Mor-Infrared ceramic infrared heater should be controlled using an open-loop (percentage timer) or a closed-loop (thermocouple feedback with digital temperature control) system. The infrared emission intensity is directly related to the surface temperature of the ceramic body.

Ceramic Heaters are mounted with the back side mounting post inserted through a pre-cut hole in a reflector. For best results the reflector should be highly reflective (polished aluminized steel) and capable of withstanding high temperatures.

Recommended distance of 8″ (200mm) to material being heated.
Heating wire embedded into concave shaped heater creates infrared in focused rays.
12 month warranty against burnout. (Estimated life in excess of 10,000 operational hours.)
CE Approved.
Ceramic tubes over power lead wire within mounting tower increases the dielectric strength between the lead wire and mounting clip preventing a potential fault to ground.

Application usage is almost anywhere a non-contact heat source is needed in industrial process heating applications (heating, curing, cooking, and drying.)

Though ceramic, the elements are fairly rugged and are more durable than quartz, and cleaning is easy, with their splash-proof, non-corrosive, glazed finish, which also makes them the ideal choice for use in food handling, medical facilities, or other antiseptic applications. The large variety of sizes, shapes, and watt densities allows ceramic elements to be highly useful in zoning arrangements such as plastic thermoforming where complex heating patterns are needed.

For best results, the surface temperature of the Mor-Infrared ceramic infrared heater should be controlled using an open-loop (percentage timer) or a closed-loop (thermocouple feedback with digital temperature control) system. The infrared emission intensity is directly related to the surface temperature of the ceramic body.

Ceramic Heaters are mounted with the back side mounting post inserted through a pre-cut hole in a reflector. For best results the reflector should be highly reflective (polished aluminized steel) and capable of withstanding high temperatures.

Recommended distance of 8″ (200mm) to material being heated.
Heating wire embedded into concave shaped heater creates infrared in focused rays.
12 month warranty against burnout. (Estimated life in excess of 10,000 operational hours.)
CE Approved.
Ceramic tubes over power lead wire within mounting tower increases the dielectric strength between the lead wire and mounting clip preventing a potential fault to ground.

Application usage is almost anywhere a non-contact heat source is needed in industrial process heating applications (heating, curing, cooking, and drying.)

Though ceramic, the elements are fairly rugged and are more durable than quartz, and cleaning is easy, with their splash-proof, non-corrosive, glazed finish, which also makes them the ideal choice for use in food handling, medical facilities, or other antiseptic applications. The large variety of sizes, shapes, and watt densities allows ceramic elements to be highly useful in zoning arrangements such as plastic thermoforming where complex heating patterns are needed.

For best results, the surface temperature of the Mor-Infrared ceramic infrared heater should be controlled using an open-loop (percentage timer) or a closed-loop (thermocouple feedback with digital temperature control) system. The infrared emission intensity is directly related to the surface temperature of the ceramic body.

Ceramic Heaters are mounted with the back side mounting post inserted through a pre-cut hole in a reflector. For best results the reflector should be highly reflective (polished aluminized steel) and capable of withstanding high temperatures.

Recommended distance of 8″ (200mm) to material being heated.
Heating wire embedded into concave shaped heater creates infrared in focused rays.
12 month warranty against burnout. (Estimated life in excess of 10,000 operational hours.)
CE Approved.
Ceramic tubes over power lead wire within mounting tower increases the dielectric strength between the lead wire and mounting clip preventing a potential fault to ground.

Application usage is almost anywhere a non-contact heat source is needed in industrial process heating applications (heating, curing, cooking, and drying.)

Though ceramic, the elements are fairly rugged and are more durable than quartz, and cleaning is easy, with their splash-proof, non-corrosive, glazed finish, which also makes them the ideal choice for use in food handling, medical facilities, or other antiseptic applications. The large variety of sizes, shapes, and watt densities allows ceramic elements to be highly useful in zoning arrangements such as plastic thermoforming where complex heating patterns are needed.

For best results, the surface temperature of the Mor-Infrared ceramic infrared heater should be controlled using an open-loop (percentage timer) or a closed-loop (thermocouple feedback with digital temperature control) system. The infrared emission intensity is directly related to the surface temperature of the ceramic body.

Ceramic Heaters are mounted with the back side mounting post inserted through a pre-cut hole in a reflector. For best results the reflector should be highly reflective (polished aluminized steel) and capable of withstanding high temperatures.

Conclusion

By our suggestions above, we hope that you can found mor infrared heating elements for you.Please don’t forget to share your experience by comment in this post. Thank you!