hometechfocus We spent many hours on research to finding kegerator conversion kit dual keg, reading product features, product specifications for this guide. For those of you who wish to the best kegerator conversion kit dual keg, you should not miss this article. kegerator conversion kit dual keg coming in a variety of types but also different price range. The following is the top 9 kegerator conversion kit dual keg by our suggestions
603 reviews analysed
Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit with 5 lb. Co2 Tank
- DUAL GAUGE REGULATOR: This Kegco 542-2 Commercial Grade Double Gauge Regulator has a y-splitter and two independent shut-off valves that let you dispense up to two kegs at the same pressure. It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi.
- LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L D System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles.
- STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length.
- INCLUDES EMPTY 5 LB. ALUMINUM CO2 TANK: All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. . These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear.
With Kegco’s Standard Dual Keg Kegerator Conversion Kit, do-it-yourself beer lovers will have all of the tools they need to convert a refrigerator or freezer into a two product draft beer dispenser that has all of the exciting features that professionals love. Included in this kit are high quality and high performance parts like a commercial-grade dual gauge regulator that allows you to monitor both the CO2 pressure in your keg and the CO2 volume in your tank, and lever handle keg couplers that are more durable and long-lasting than wing handle couplers. Once the conversion process is complete, your new kegerator will be able to run 2 full-size kegs, 2 pony kegs, 2 five gallon kegs, or any combination you choose, depending on the capacity of the refrigerator or freezer that you have converted.
Kegco Standard Tower Kegerator Conversion Kit with 5 lb. Co2 Tank – STCK-5T
- Single Faucet 3″ Diameter Polished Stainless Steel Draft Tower
- Commercial Double Gauge Co2 Regulator & New Aluminum 5lb Co2 Tank
- American “D” System Sankey Lever Handle Tap Coupler
- 5 Feet of 3/16″ ID Beer Line Assembly
- Note: Beverage Factory is the only Authorized Reseller of Kegco Kegerator Kits.
This Standard Tower Conversion kit is the perfect solution for those who are converting a compact refrigerator or converting a freezer into a kegerator. This kit comes with brand new, high quality draft beer components and contains everything you will need to successfully convert your compact refrigerator/freezer into a kegerator at great savings. Note: Beverage Factory is the only Authorized Reseller of Kegco Kegerator Kits (Other sellers are selling inferior kits that are not Warrantied or Quality Assured Kegco Quality.
BACOENG Double Faucet Door Mount Kegerator Refrigerator Conversion Kit No Tank
- 1. DUAL GAUGE REGULATOR: It comes with an appropriate pressure dial that features the style of a knob for regulating pressure. With a weight of 3 pounds, the unit comes with rubber covers for protective purposes. You can use the gauge to know the pressure outside and inside the CO2 tank –you will not have to be worried that your gas might run out. It also has a shutoff valve that features a built-in spring for preventing the backflow of beer. Pressure Relief Valve Releases at 45PSI.
- 2. LEVER HANDLE KEG COUPLER: This refers to a D System Keg Coupler that has a strong construction made of nickel-plated forged brass. The probe, on the other hand, is made of stainless steel. The unit can be used alongside any domestic brand American D system Sankey kegs. It features an easy-to-use design, where you only need to pull the lever handle out and down, in that order, to couple the keg. The coupling of the keg is quite convenient with the availability of a 55-psi pressure relief valve
- 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you’ll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8″ long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1″ hole.
- 4. METAL BEER FAUCET WRENCH: You need the ideal wrench spanner for loosening or tightening shrank collars easily and quickly without the worry that you will scratch your faucets, and the standard metal beer faucet wrench is just the right tool. The all-mental sturdiness of this wrench makes it quite durable as well as ideal to handle any tightening or loosening needs. It is 5-1/4″ in length, which makes it easy to use on any surface.
- 5. STANDARD METAL BEER FAUCET WRENCH: You need the ideal wrench spanner for loosening or tightening shrank collars easily and quickly without the worry that you will scratch your faucets, and the standard metal beer faucet wrench is just the right tool. The all-mental sturdiness of this wrench makes it quite durable as well as ideal to handle any tightening or loosening needs. It is 5-1/4″ in length, which makes it easy to use on any surface.
BACOENG Standard Tower Kegerator No Tank Beer Conversion Kit
- PRO SERIES DUAL GAUGE REGULATOR: Easily measure PSI and Co2 volume and adjust Co2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features. The top gauge indicates output pressure, while the side gauge tells you what’s left in the Co2 tank, so you don’t run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve.
- LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L D System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3″ diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and for screws for easy mounting.
- STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length.
- INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow directions and all of the high-quality draft dispense components you’ll need to quickly and easily convert your refrigerator into a high-performance draft beer dispenser
BACOENG A Tap Kegerator Door Refrigerator Conversion Kit No Tank
- 1. DUAL GAUGE REGULATOR: This unit weighs about 3 pounds and includes 2 rubber protective covers. It always tell you working pressure and tank pressure with pinpoint accuracy. A convenient knob style pressure dial that can be adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines.
- 2. HANDLE D-SYSTEM KEG COUPLER: D-System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you’ll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8″ long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1″ hole.
- 4. METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets.
Dual Beer Tower Dispenser – Draft Kegerator Tower Beer Dispenser Kit with 2 Faucet Tap Handles & Caps, Hose, Keg Wrench
- DOUBLE YOUR POURING POWER: Limiting yourself and your guests to pouring one beer on tap at your in-home bar is time consuming and frustrating
- The G. Francis Double Tap Draft Beer Tower is a beer faucets accessory that will double your pouring power and give your bar the finished feel you have been longing for
- USE YOUR EQUIPMENT: Inside lined with foam sheet for cooled tower systems insulation
- Tower stands 13.25 inches (33.7cm) tall (not including 3.1-inch/7.9cm tall tap handles) and has a 3-inch (7.6cm) diameter and 4.5-inch (11.4cm) base diameter
- 2.75-inch (7cm) center-to-center mounting hole distance (fits standard 3-inch/7.6cm hole pattern)
- Includes 2 separate 5-foot (1.5m) lengths of 3/16-inch (4mm) inside diameter (ID) (7/16-inch / 11mm OD) clear beer tubing with a 4.5-foot (1.4m) reach
- BUILT TO LAST: Constructed from polished silver stainless steel hardware and components, hard plastic faucet knob tap handles, and soft rubber faucet cap sanitary covers for maximum strength and longevity that resists rust and corrosion while preventing scratches and other damage
- Transparent hose is FDA approved 21CFR 175.300 PVC
- KEEP OUT CONTAMINANTS: Black faucet cap sanitary covers are the most simple and effective way to keep the faucets clean and are an essential part of draft faucet hygiene as it protects the faucets from insects and bacteria that could otherwise make their way into the spout of the faucet and into your drink
- Faucets (tap handles) are threaded and removable for easy cleaning and sanitizing
- PACKAGE CONTENTS: This beer faucet accessories package includes (1) double tap draft beer tower, (2) beverage tap flow control faucets, (2) faucet covers, (4) mounting hardware bolts, (1) tower gasket, (2) hose drink tubes, hose clamps, and a multi-purpose keg faucet wrench for your convenience
- Keg couplers required, not included
Kegerator Tower Cooler for Beer Tower – Neoprene Design – Perfect Fit for Kegerator Tap Tower – Easy to Use Beer Tower Cooler Accessory (3.0" Diameter x 11.5" Height Double Tap Beer Tower)
- MAINTAINS ICY COLD BEER TOWERS: Ensure that every pour from your draft beer tower comes out icy cold. Even the first! Insulate your tower with this simple to use kegerator Tower Cooler accessory.
- END FOAM NOW: Maintain a constant temperature throughout your kegerator system with a Tower Cooler Chiller. Beer warms rapidly through a poorly insulated beer tower causing foam to form…in your cup!
- SAVE ELECTRICITY WITH LITTLE EFFORT: The added insulation of a Tower Chiller will reduce kegerator energy consumption.. Unlike kegerator tower cooler fans, the Tower Chiller takes seconds to install.
- MINIMIZE CONDENSATION: Kegerator towers sweat. Condensation buildup is a sign of poor insulation and will lead to corrosion and rust. Increase the lifetime of your kegerator and protect your beer tower.
- HIGH QUALITY MATERIAL AND BUILD: Crafted from high quality neoprene with heavy-duty double stitching. Easy to clean and guaranteed to last. 3” Diameter and 11.5” Height. Ideal for double tap beer towers.
DOUBLE TAP DRAFT BEER TOWER – 2-TAP BEER COLUMN 13” HIGH 3” DIAMETER – STAINLESS STEEL BODY WITH UNIQUE BLACK SATIN FINISH – CHROME FINISH FAUCETS – BEERGON BT-1000
- TIRED OF THE SAME LOOKING BEER TOWER? BEERGON DOUBLE TAP DRAFT COLUMN is made of premium stainless steel with a unique black satin finish so you can distinguish yourself from your friend’s beer dispenser.
- YOU WISH THAT SOMETIMES YOU HAD A DIFFERENT BEER FLAVOR? NOW YOU CAN ! HAVE 2 beer FLAVORS poured from the same beer tower system at the same time ! It has high quality FDA-safe beer line (3/16” ID, 7/16” OD) that will not impart plastic flavors.
- YOU ARE WORRIED THAT IT MAY BE COMPLICATED TO INSTALL YOUR NEW TOWER? DO NOT FRET ! BEERGON DRAFT BEER TOWER IS SUPER EASY TO INSTALL on your tabletop and comes with all the hardware necessary to secure this column on your counter.
- ARE YOU CONCERNED THAT THE BEER TAPS WILL RUST? RELAX ! BEERGON BEER TAPS ARE SOLIDLY MADE and are installed and used in many bars and do not show signs of rust over many years !
- YOU THINK THAT A STANDARD 12-INCH TALL TOWER IS NOT HIGH ENOUGH FOR YOU? GOOD NEWS ! WE HAVE ADDED AN EXTRA INCH. Enjoy your 13-inch tall beer tower by pouring your beer into your extra-tall mugs !
BEERGON Beer Tower BT-1000 is made of premium stainless steel with a black satin finish so you can distinguish yourself from your friend’s beer towers. This double tap tower for your home allows you to have 2 beer flavors poured from the same tower at the same time and is equipped with a high quality FDA-safe beer lines (3/16” ID, 7/16” OD) that will not impart plastic flavors. BEERGON DRAFT BEER TOWER is super easy to install and comes with all the hardware necessary to secure this column on your counter. BEERGON BEER TAPS are solidly made and installed and used in many bars and do not show signs of rust over many years ! GET YOUR BEERGON BEER TOWER NOW, YOU DESERVE IT !
INSIDE THE PACKAGE:
One (1) beer tower cooler insulator
Two (2) faucets/taps
Two (2) tap handles (black)
Two (2) springs already inside the faucets
Two (2) 3-feet long beer lines already installed;
One (1) wrench
One (1) washer for the column base
Four (4) bolts to secure the base on the counter
SPECIFICATIONS:
Column height: 13”
Column diameter: 3”
Base diameter: 4-3/16”
Height from base to bottom of tap: 10”
Height from base to top of tap handle: 16.25”
FDA-safe beer lines (3/16” ID, 7/16” OD)
Faucet finish: Polished Chrome
Tower body color: Black satin
Keg Coupler, Beer Keg Coupler, D Sankey, Sankey D, Sankey D Coupler Stainless Probe & Body, Keg Couplers With Black Handle & Hose Clamp
- ★ Stainless Steel Body ★ The Keg Coupler’s Body is made of 304 stainless steel that will not wear away over time and it will not chip like a chrome keg couple. It can improve durability and resistance to chemicals.
- ★ Stainless Steel Probe ★ The Stainless Steel Keg Coupler’s Probe is made of stainless steel that for maximum durability and sanitation, for the ultimate in purity excellent for beer, wine, and cider.
- ★ Tap For American Kegs Or Sankey Keg ★ The beer keg coupler is D – System keg taps. It fits perfectly into american kegs/sankey keg. Great sankey d coupler to replace old tap that was leaking and hard to get on.
- ★ Come With Two Tailpiece Set & Hose Clamp ★ The sankey keg coupler is G5/8 thread( U.S. Beer Industry Standard). This d coupler has a 3/8″ OD gas/beer tailpiece to fit 5/16″ ID hose.
- ★ With A Pressure Relief Valve ★ This keg coupler features a 55 PSI pressure relief valve with a food grade silicone O-ring to avoid relief valve leakage of the Keg coupler.
“D” system is the most common system available in the U.S., also known as American Sankey. It is used by all the major breweries.
How to use the beer keg coupler？
You also need a gas tank/regulator/beer faucet/hose to get the gas from the regulator to the coupler and dispense your beer. And then tap the sankey coupler to keg, pull the handle out and then down to lock
How to check whether the sankey d keg coupler leaks or not？
The best way to check is to spray it with soapy water when it is under pressure and look for bubbles.
There is a white lug under the gas in nipple that is held on by a hex nut. That prevents backflow into the regulator and also acts as a seal.
It’s possible that that hex nut is not tightened enough or that check valve is misaligned, causing a bad seal
Features:
System: D Keg Coupler
Body Material: 304 Stainless steel
Probe Material: 304 Stainless steel
Handle Color: Black
Handle Style: 304 Stainless steel – Lever
Gas Port: 3/8″ O.D. Barb (To fit 5/16″ I.D. Gas Hose)
Beer Port: 5/8″ Thread (U.S. Beer Industry Standard)
pressure relief valve: pressure relief valve releases at 55 PSI
Short handle is ideal for the smaller diameter 1/6 kegs
Package Includes:
1* 304 Stainless Steel Keg Coupler
Conclusion
By our suggestions above, we hope that you can found Kegerator Conversion Kit Dual Keg for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Kegerator Conversion Kit Dual Keg, eg:
- What are Top 10 Kegerator Conversion Kit Dual Keg for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Kegerator Conversion Kit Dual Keg to buy?
- What are Top Rated Kegerator Conversion Kit Dual Keg to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Kegerator Conversion Kit Dual Keg?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Kegerator Conversion Kit Dual Keg.
- Before deciding to buy any Kegerator Conversion Kit Dual Keg, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Kegerator Conversion Kit Dual Keg and What you should consider when buying the Kegerator Conversion Kit Dual Keg and Where to Buy or Purchase the Kegerator Conversion Kit Dual Keg. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Kegerator Conversion Kit Dual Keg of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Kegerator Conversion Kit Dual Keg.
