hometechfocus 
Nowadays, there are so many products of ice maker water line elbow adapter in the market and you are wondering to choose a best one. You have searched for ice maker water line elbow adapter in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ice maker water line elbow adapter which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
BrassCraft Mfg SF0782X Adaptor ICE MAKER ADAPTER KIT – COMPRESSION
Brass, ice maker Adapter kit, compression, 3/4 inch female hose thread, 1/8 inch female pipe thread nut with 1/4 inch compression x 1/8 inch male pipe thread elbow, kit contains 1 each: large & small brass nut, brass compression sleeve, brass tube insert, plastic sleeve & brass elbow, lead free, carded.
Hydro Master 0540001 1/4 IN x 15 FT Copper Tubing Ice Maker and Humidifier Installation Kit, Lead Free
- 1/4 In x 15ft (6.35mm x 4.57m) copper tubing, long enough to meet most installation, and can be cut to length for your request
- Made from lead free copper and brass, heavy duty and long lasting
- Hydro Master ice maker/humidifier installation kit includes copper tubing, self-piercing tap valve, clamp and other hardwares
- The hookup kit comes with whole kit, easy and flexible installation, no extra accessories needed
- Universal use, adapts to most ice makers and humidifiers
Thanks for choosing Hydro Master!
Kit includes: 1 copper tubing+1 self-piercing tap valve and clamp+2 compression unions +2 plastic sleeves+1 brass sleeve+1 compression nut+2 brass inserts
Size: 1/4″ x 15′
Material: copper
Weight: 1.27lbs (579g)
INSTALLATION
1.Choose convenient cold water supply line
2.Install saddle valve, following those instructions carefully. 1/4″ hole must be drilled if installing onto steel pipe
3.Connect copper tubing to saddle valve using brass sleeve
4.Connect tubing to the refrigerator using either the 1/4″ tube x 1/8″ male pipe straight adapter, or the 1/4″ tube x 1/8″ male pipe elbow
5.Turn on water supply at saddle valve slowly, and check all connections for leaks before replacing refrigerator in its original place
NOTE: WHEN INSTALLING TUBING, BE SURE THAT TUBING IS INSERTED IN FITTING AS FAR AS IT CAN GO.
PEX Ice Maker Installation Kit – 25 Feet of Tubing For Appliance Water Lines With Stop Tee For Quick Installation, 1/4” Compression Fittings, Flexible Hose For Potable Drinking Water
- COMPLETE ICE MAKER WATER LINE KIT: Crosslinked High Density Polyethylene, PEX, hose is extremely durable. It won’t corrode and can’t be damaged from expansion or contraction. Easily withstands temperature and pressure stresses that occur in water systems. Flexible, one piece design includes 1/4” compression fittings at each end. Perfect for refrigerator, freezer, humidifier and water filter connections.
- INSTALLS IN MINUTES AND LEAVES NO ODORS OR BAD TASTE: Complete your maintenance or fix your appliances quickly and easily. This kit is designed to get the job done fast without inconveniencing yourself or other members of your household. The stop tee valve quickly and neatly connects to your current set up to divert the water where you want it to go.
- COPPER STOP TEE allows you to safely use this set up for your ice makers, humidifiers, water filters and other potable drinking water applications. Stop tee measures 1/4″ x 3/8″ x 3/8″ and is ready to connect to existing supply stops.
- HIGH QUALITY AND SAFE PEX AND COPPER. The PEX tubing is extremely reliable and long lasting. It is NSF 14, NSF 61 and ASME A112.18.6 certified. The copper stop tee is sturdy, durable, and long lasting. Great for both contractors and DIYers. Includes clear instructions to complete your set up quickly.
- LIMITED LIFETIME WARRANTY. 25 feet of PEX tubing and 1/4” x 1/4” compression fitting. Stop tee measures 1/4″ x 3/8” x 3/8”. Limited lifetime warranty. Choice Hose and Tubing part number 509 5164K.
Complete Ice Maker And Humidifier Installation Kit | 25’ PEX Tubing, With Easy To Use Stop Tee, Includes Everything Necessary For A Complete Installation
Frizzlife Brass Feed Water Adapter – 3/8 inch,3/8 inch Comp and 1/4 inch OD Compression Angle Stop Valve Adapter for Reverse Osmosis Water Filters, Coffee Brewers,Ice Maker
- ALL BRASS MATERIAL
- Fits 3/8″ OD angle valve(9/16-24UNEF)
- TEE UNION ADAPTER: 3/8″ Thread male(Diamater 14.28mm) x 3/8″ thread female(Inner diameter 12.96mm) x 1/4″ tube(Plastic Tubing only) quick connect with compression.
- ROUGH BRASS CONSTRUCTION: Full copper material to prevent leakage
- INSTALLS IN SECOND: extremely easy to load and unload.
- APPLICATIONS: Adapt to most home kitchen feed water supply to Water filters, Reverse Osmosis water system, etc. Fits for angle stop valve BrassCraft, EZ-Fluid, PROCURU, SharkBite
- LEAD FREE PRODUCT
Eastman 60233 PEX Pre-assembled Ice Maker Outlet Box, 1/2 Inch Crimp PEX Connection with Installed 1/4-Turn Ball Valve, White
- CONNECTION: 1/2 inch Crimp PEX (F1807) Connection and 1/4-inch OD compression outlet
- DIMENSIONS: Rough opening of 5-3/4-inch W x 4-7/8-inch H x 3-1/2-inch D
- Faceplate Dimensions: 8-1/4-in w x 7-5/16-in H
- CONTENTS: Along with the ice maker box this pack includes a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover
- DESIGN: This outlet box is designed for recessed residential applications
- EASY INSTALLATION: One-piece design makes installation quicker and easier
This Eastman 60233 Pex Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.
The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).
Sharkbite 25032A Ice Maker Outlet Box, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe
- INSTALLS IN SECONDS: Ice Maker Box requires no special tools, no soldering, no crimping, unions or glue. Just push to create a watertight seal to the SharkBite fitting
- COPPER, PEX, CPVC: SharkBite fittings fit copper tubing, CPVC, PEX or PE-RT pipe in any combination
- LEAD FREE COMPLIANT: DZR lead free brass SharkBite valves
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
The SharkBite Ice Maker Outlet Box is integrated with SharkBite push-to-connect ends to allow for quick and easy installation of a water main supply and shutoff for refrigerator ice maker and water dispenser appliances using Copper, PEX, CPVC, or PE-RT water lines. This is lead-free compliant and is offered with or without integral water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing. The snap-on faceplate accommodates up to 3/4″ drywall. 1/2″ SB X 1/4″ Compression Can be used with copper, cpvc or pex lines Decease the time & effort needed to connect water distribution pipe, no glue, soldering or crimping needed Simply cut your pipe, deburr, mark the pipe approximately 1″ For proper insertion depth, install pipe to proper depth Use behind your refrigerator, ice maker, or water dispenser to provide a clean installation & allow for easy shut off Includes the ice maker outlet box Faceplate cover, 2 support brackets.
Camco 90 Degree Hose Elbow- Eliminates Stress and Strain On RV Water Intake Hose Fittings, Solid Brass (22505)
Prevent hose crimping and strain, and extend hose life. Camco RV 90 Degree Hose Elbow eliminates unnecessary stress and strain on all RV water intake hose fittings. It’s perfect for RVs or just around the house. Elbow is made of brass for years of trouble-free use.
HQMPC Garden Hose Connector 90 Degree Brass Garden Hose Elbow Solid Brass Adapter (2Pcs)+ Extra 4 Pressure Washers
- 3/4″ Garden Hose elbow:3/4″ garden hose threads,male to female connection,you can connect them for your garden quick connect,pressure regulators,shut off valves.
- Solid brass construction: New Approved structure design and use better garden hose gaskets, Extra 4 pressure washers provided
- Quality guranteed, we will return all the fund if you are not satisfied with the quality
- No Leaks,Durable, Easy to Install,Keep the water flowing.
Certified Appliance Accessories Braided Stainless Steel Ice Maker Connector, 15ft
- Braided stainless Steel ice maker connector
- 1/4 inch fem. x 1/4 inch fcm
- Upc, NSF/ANSI 61 & case certified Certified Appliance Accessories recommends installation of this product be performed by a licensed professional
- 15Ft
- Braided stainless steel
- 1/4 -Inch Comp x 1/4-Inch Comp
- 5 year warranty- From the Manufacturer
Product Description
Are you replacing a 5+ year-old ice maker connector hose or hooking up a new ice maker? This 15 ft. Braided Stainless Steel Ice Maker Connector from Certified Appliance Accessories is just what you need. It is corrosion-resistant inside and out plus bends freely for easier installation in cramped spaces.
From the Manufacturer
Ice Maker Connectors (15-Foot)
Fluidmaster 12IM72 Ice Maker Connector, Braided Stainless Steel – 1/4 Compression Thread x 1/4 Compression Thread, 6 Ft. (72-Inch) Length
- 72” in length
- ¼ COMP x ¼ COMP Female Compression Thread Connection
- Lead Free
- Easy Install
- Braided stainless steel construction won’t kink or crease
- Heavy-duty nickel-plated brass hex nuts are easy to grip and provide durability
- Replaces old copper or vinyl connectors
- Meets all code requirements
Product Description
This Fluidmaster Braided Stainless Steel 6-Foot (72 in) Length Ice Maker Supply Line connects your Icemaker to the wall water supply. Fluidmaster Icemaker water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts. A proven supply line that won’t crease or tangle even in the tightest of corners. Durability and ease-of-use were at the forefront of this design, with the nickel plated brass hex nuts for easy to grip tightening. A 1/4-Inch female compression thread by 1/4-Inch female compression thread connector with an efficient flow rate. Code approved with a 5 year warranty.
From the Manufacturer
Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.
Conclusion
By our suggestions above, we hope that you can found ice maker water line elbow adapter for you.Please don’t forget to share your experience by comment in this post. Thank you!
