Best Ice Maker Tubing Connector

This high-quality icemaker kit will provide you with clear and sparkling ice cubes and drinking water at your refrigerator by routing purified water from your existing reverse osmosis system. You will never have to spend money on small, ineffective and expensive refrigerator filters ever again.

This icemaker kit includes everything you will need to quickly and easily connect your refrigerator and reverse osmosis system. It includes one JG quick-connect “Tee” fitting, one JG quick-connect shut off ball valve and 20 feet of JG ¼” food-grade poly tubing. The “Tee” fitting diverts the RO purified water between the fridge and RO faucet giving access to both outlets. The ball valve can be used to shut off water flow to the fridge.

Kit includes
(1) * JG ¼” Tee quick-connect fittings
(1) * JG ¼” Shut off valve
(1) * JG ¼” Tubing (20 ft)

Works for all APEC ROES-50, ROES-PH75, ROES-UV75, RO-45, RO-90, RO-PERM and RO-PUMP systems, and most standard under-counter reverse osmosis systems using ¼” tubing and connectors.

For over 20 years, APEC has been an industry leading manufacturer of high performance RO systems.

APEC Water does not distribute or sell our products to any 3rd party sellers on Amazon. Please purchase genuine APEC Water products from Amazon or APEC Water directly for authenticity.

Product Description

This Fluidmaster Braided Stainless Steel 5-Foot (60 in) Length Ice Maker Supply Line connects your Icemaker to the wall water supply. Fluidmaster Icemaker water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts. A proven supply line that won’t crease or tangle even in the tightest of corners. Durability and ease-of-use were at the forefront of this design, with the nickel plated brass hex nuts for easy to grip tightening. A 1/4-Inch female compression thread by 1/4-Inch female compression thread connector with an efficient flow rate. Code approved with a 5 year warranty.

From the Manufacturer

Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.

Why choose the ice maker kit?1. This high-quality icemaker kit will provide you with clear and sparkling ice cubes and drinking water at your refrigerator by routing purified water from your existing reverse osmosis system. 2. The tested design allows users to connect and disconnect quick and easy without the need of any other tools. Applications include multiple potable liquids such as reverse osmosis drinking water, beverage dispensing, coffee machines, RV and Marine, misting systems, ice makers and many more. 3. If you have a reverse osmosis system and a refrigerator with an ice maker and/or water dispenser, this kit is perfect for you. A reverse osmosis filtration system hands down out performs a single inline carbon filter found in most popular refrigerators. So it’s smart to connect RO with your refrigerator’s water line. Parts List: -1/4 inch water tubing (25 ft. ) -a 1/4″ x 1/4″ x 1/4″ “T” valve -an inline 1/4″ x 1/4″ shut off valve -a compression fitting -a independent inline 1/4″ x 1/4″ valve 100% quality assurance. If you have any problems, please contact us, we’ll reply to you in 24 hours.

Complete Ice Maker And Humidifier Installation Kit | 25’ PEX Tubing, With Easy To Use Stop Tee, Includes Everything Necessary For A Complete Installation

Product Description

Are you replacing a 5+ year-old ice maker connector hose or hooking up a new ice maker? This 15 ft. Braided Stainless Steel Ice Maker Connector from Certified Appliance Accessories is just what you need. It is corrosion-resistant inside and out plus bends freely for easier installation in cramped spaces.

From the Manufacturer

Ice Maker Connectors (15-Foot)

Product Description

The Eastman 41033 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 5-feet long. The supply line features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping making it long-lasting. It consists of nickel-plated brass nuts which ensure secure fitting.
Eastman’s 5′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.

From the Manufacturer

Eastman’s 5′ Stainless Steel Icemaker Connector is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.

What is it?

PureSec 2018 SE14TU14STEM Mini white plastic quick fitting 90 degree elbow Stem plug in push connector , which is suitable for use in hot(140°F Max) and cold (33°F Min.)water applications. It adopts Push-Fit technology, which allows users to connect and disconnect quick and easy without the need of any other tools.Operated by hand, it replace threaded or flanged connections, which require wrenches. It fits standard tubing OD 1/4″Copper, CPVC, PEX and PVC tubing for most RO systems

Where to use it ?

Applications include RO system, beverage dispensing, refrigerator ice maker, coffee machine etc. This quick connect fitting is perfect for a water line going to your fridge or your water line under your sink for a filtration system.This will take the headache out of an under counter water filter installation

How to use it ?

Just pop in your 1/4″ tubing into one end, pushing until it won’t go in. Then plug in the stem part to the place you need to connect . To remove, just push in the outer circle on each end and pull right out. You need to make sure the tubing is cut squared to ensure no leaks. Be sure you cut the tubing even and straight, without crimping it. Then insert straight, and all the way into the connector. If it’s crooked, or not inserted all the way, or crimped, it may leak

PureSec 2018 SE14TU14STEM Mini white plastic quick fitting 90 degree elbow Stem plug in push connector is quality, reliability, and economy in potable water service.

What’s in the parcel?

PureSec 2018 SE14TU14STEM Mini white plastic quick fitting 90 degree elbow Stem plug in push connector

“C” clip

Get your appliances set up quickly and easily with this ice maker/ humidifier/ evaporative cooler installation kit. Poly tubing is durable and reliable, and will not ruin the fresh taste of your water. This complete installation kit includes everything necessary for installation, plus step-by-step instructions to make D-I-Y installation a breeze. Best of all, there’s no need to shut off your water supply during installation! Limited lifetime warranty. Make it yours today!

The iSpring fridge connection kit connects your reverse osmosis system or other water filters to your fridge. It can be used to supply your refrigerator’s ice maker or water dispenser, your coffee maker, etc. The kit comes with a 1/4″ x 1/4″ x 1/4″ “T” valve to branch off from the RO system, 20 feet of 1/4″ tubing, a 1/4″ x 1/4″ ball valve to shut off the flow when needed, and a compression connection set for connecting to the output location. The fridge connection kit will work with any RO system or filtration system that uses standard 1/4″ tubing. Why iSpring? Located in Alpharetta, Georgia for over a decade, iSpring Water Systems LLC is a family owned company specializing in reverse osmosis water filtration systems. Our products include residential and commercial reverse osmosis (RO) systems, whole house water systems, ultrafiltration systems, shower, faucet, and counter top filters, filter cartridges and housings, RO coolers, and kitchen faucets and fittings. Our aim is to make high quality drinking water accessible for all households. With affordable pricing, solid quality, prompt delivery, and top notch customer service, we hope to assist in bringing you great water for years to come.

Conclusion

By our suggestions above, we hope that you can found ice maker tubing connector for you.Please don’t forget to share your experience by comment in this post. Thank you!