The Best Honeywell Carbon Monoxide Detector 8600A 1000

Product Description

Digital Display – Displays the level of carbon monoxide the unit is sensing. The unit updates this reading every 15 seconds

Amazon.com

Protect your family from the dangers of carbon monoxide (CO) exposure with the Kidde KN-COPP-3 Nighthawk Plug-In Carbon Monoxide Alarm with Battery Backup and Digital Display. The Nighthawk is an easy-to-install unit that provides reliable protection against the dangers of CO. It features a digital display that shows CO levels in parts per million allowing you to see if, how, and when levels change.

KN-COPP-3 Nighthawk Carbon Monoxide Alarm At a Glance: Plug-in unit with battery backup and digital display that shows CO level Level button displays the peak CO level recorded by the alarm since it was last reset Loud alarm pattern sounds when unit detects elevated CO levels Direct-plug, 6-foot power cord, and table top mounting options. Five-year limited warranty

This discreet alarm is designed to fit into any standard A/C outlet in your house. View larger.

The easy-read digital display updates every 15 seconds to indicate any abrupt changes or alarming trends in CO levels. View larger.

Advanced Technology in an Easy-to-Install, Plug-In Design
Designed for home use, the Kidde KN-COPP-3 Nighthawk is a UL-listed, A/C-powered, plug-in CO alarm that utilizes sophisticated electronic components and sensor technology to protect you and your family from the dangers of CO. It plugs directly into a standard A/C outlet and includes a 9-volt battery backup that provides continuous monitoring of CO levels–even during power outages.

About Carbon Monoxide: The Silent Killer
The leading cause of accidental poisoning deaths in North America, carbon monoxide (CO) is often referred to as the silent killer because it’s odorless, tasteless, and invisible. Carbon monoxide poisoning can come about via a number of sources, including everyday items and appliances in your home or office. And because symptoms of CO poisoning mimic the flu or other common illnesses it can often go undiagnosed.

Audible Alarm Pattern Alerts you to Elevated CO Levels
When placed on every level of your home, alarms like the KN-COPP-3 Nighthawk can help protect everyone in the house from CO exposure by giving you an unmistakable signal when levels have reached an unhealthy point. If unhealthy levels are detected, the alarm will emit four quick audible beats every five seconds until either levels decrease or the reset button is pressed.

Easy-to-Read Digital Display Shows CO Levels
The KN-COPP-3 Nighthawk is unique among traditional CO alarms because of its digital display. This display clearly shows levels of CO that the unit has detected and stored– from 30 to 999 ppm–and it updates every 15 seconds to indicate any abrupt changes or alarming trends. The display also shows the peak CO level recorded by the alarm since it was last reset or unplugged.

LED Shows Sensor Status
With the KN-COPP-3 Nighthawk, you never have to wonder if the sensor is functioning properly. A blinking dot in the lower right-hand corner of the display denotes normal operation, so you can trust that it’s working. In addition, you can test alarm function by pressing the test/reset button at any time to verify that the horn and electric circuitry are operating properly.

Convenient Mounting Options
The KN-COPP-3 Nighthawk has a low-profile design that makes it suitable for any room in your home. The detector can be plugged into any standard A/C outlet; it’s plug can be snapped into the back of the unit and can be rotated so the alarm remains vertical, independent of whether the electrical socket is mounted vertically or horizontally. In addition, the alarm comes with a 6-foot extension cord, so the unit can be plugged into the wall outlet and then placed on a table or shelf. For the most thorough protection, place an alarm on every level of your home.

The UL-listed Kidde KN-COPP-3 Nighthawk has a seven-year life and is backed by a five-year limited warranty.

About Kidde: A UTC Fire and Security Brand
Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire and Security brand, with a history that’s rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world’s first wireless networked smoke detectors in 2004.

What’s in the Box
Kidde KN-COPP-3 Nighthawk CO Alarm, 9-volt battery, mounting hardware, and installation guide.

Keep your family safe by placing alarms and extinguishers in each area of the house, and by having a fire escape plan. Click here for a detailed image.

See all Product description

Product Description

The Kidde KN-COEG-3 AC powered, plug-in CO and explosive gas alarm protects you and your family from two deadly threats. The KN-COEG-3 includes 9V battery back up that provides protection during a power outage, when AC-only units can not provide protection. By pressing the Peak Level Button you can see the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous digital display shows you the level of carbon monoxide (if any) the unit is sensing as well as if gas is present. The gas sensor is a metal oxide sensor designed to detect natural gas (methane) or propane. Temperature range- 40 degree fahrenheit to 100 degree fahrenheit.

Amazon.com

Protect your family from the dangers of carbon monoxide (CO), methane, and propane exposure with the Kidde KN-COEG-3 Nighthawk Plug-In Carbon Monoxide and Explosive Gas Alarm. The Nighthawk is an easy-to-install unit that provides reliable protection against the dangers of CO and explosive gas. The digital display shows if gas is present indicates CO levels in parts per million, allowing you to see if, how, and when levels change.

Advanced Technology in an Easy-to-Install, Plug-In Design
Designed for home use, the Kidde KN-COEG-3 Nighthawk is a UL-listed, A/C-powered, plug-in alarm that utilizes sophisticated electronic components and sensor technology to protect you and your family from the dangers of CO, methane, and propane exposure. It plugs directly into a standard A/C outlet and includes a 9-volt battery backup that provides continuous monitoring–even during power outages.

The Dangers of Carbon Monoxide, Methane, and Propane Exposure
The leading cause of accidental poisoning deaths in North America, carbon monoxide (CO) is often referred to as the silent killer because it’s odorless, tasteless, and invisible. Carbon monoxide poisoning can come about via a number of sources, including everyday items and appliances in your home or office. And because symptoms of CO poisoning mimic the flu or other common illnesses it can often go undiagnosed.

Likewise, methane and propane gases are commonly used in homes for cooking, heating, and water heating. Although it happens rarely, gas leaks can sometimes occur inside the home, increasing the risk of fire or explosion.

Audible Alarm Pattern Alerts you to Elevated CO and Gas Levels
When placed on every level of your home, alarms like the KN-COEG-3 Nighthawk can help protect everyone in the house by giving you an unmistakable signal when gas levels have reached an unhealthy point. If unhealthy levels of CO are detected, the alarm will emit four quick audible beeps every five seconds until either levels decrease or the reset button is pressed. If methane gas or propane gas is detected, the alarm will emit beeps every other second with “GAS” shown in the display.

Easy-to-Read Digital Display Shows CO Levels
The KN-COEG-3 Nighthawk is preferred among traditional CO and explosive gas alarms because of its digital display. This display clearly shows levels of CO that the unit has detected and stored– from 30 to 999 ppm–and it updates every 15 seconds to indicate any abrupt changes or alarming trends. The display also shows the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous display also shows if gas is present.

LED Shows Sensor Status
With the KN-COEG-3 Nighthawk, you never have to wonder if the sensor is functioning properly. A blinking dot in the lower right-hand corner of the display denotes normal operation, so you can trust that it’s working. In addition, you can test alarm function by pressing the test/reset button at any time to verify that the horn and electric circuitry are operating properly.

Convenient Mounting Options
The KN-COEG-3 Nighthawk has a low-profile design that makes it suitable for any room in your home. The detector can be plugged into any standard A/C outlet; it’s plug can be snapped into the back of the unit and can be rotated so the alarm remains vertical, independent of whether the electrical socket is mounted vertically or horizontally. In addition, the alarm comes with a 6-foot extension cord, so the unit can be plugged into the wall outlet and then placed on a table or shelf. For the most thorough protection, place an alarm on every level of your home.

The UL-listed Kidde KN-COEG-3 Nighthawk has a seven-year life and is backed by a five-year limited warranty.

About Kidde: A UTC Fire and Security Brand
Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire and Security brand, with a history that’s rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world’s first wireless networked smoke detectors in 2004.

What’s in the Box
Kidde KN-COEG-3 Nighthawk Carbon Monoxide and Explosive Gas Alarm, 9-volt battery, mounting hardware, and installation guide.

See all Product description

The First Alert CO710 Carbon Monoxide Alarm with 10-Year Battery and Digital Temperature Display detects dangerous carbon monoxide for up to 10 years. This carbon monoxide detector uses an electrochemical carbon monoxide sensor, the most accurate CO detection technology available, to detect the CO you can’t see, smell, or taste in the air. A built-in 10-year lithium battery means you never need to worry about changing batteries during the lifetime of the alarm. This stylish CO monitor is designed to sit on top of a dresser or tabletop, and it has a backlit digital display that clearly shows the ambient temperature, as well as current and peak CO concentrations. An 85-decibel horn sounds if carbon monoxide levels are too high, and a test/silence button silences the alarm and allows you to test its functionality.

The First Alert BRK PRC710 Smoke and Carbon Monoxide Alarm with Built-In 10-Year Battery features a photoelectric smoke sensor and an electrochemical carbon monoxide sensor. The photoelectric sensor detects larger smoke particles from smoldering fires from objects like cigarettes burning on furniture or in trash cans. The alarm features a loud, 85-decibel alarm, designed to wake even the soundest of sleepers. One button silences any nuisance alarms, and also tests detector functions, while lights indicate if the alarm detects smoke or carbon monoxide. The battery-operated smoke and CO detector can be installed easily, with no wires or electrician required, and its slim profile will seamlessly blend in with your home decor. A one-touch silence/test button makes it easy to operate. Its built-in 10-year battery will provide continuous power for the life of the detector and continues to protect during power outages. As stated in the manual under Weekly Testing Warning, actual battery service life depends on the Smoke/CO Alarm and the environment in which it is installed. Batteries can lose life depending on the environment which could be related to direct sunlight, high temperature and high humidity.

Product Description

The First Alert CO615 Plug-In Carbon Monoxide Detector helps protect your family with an electrochemical sensor, an 85-decibel alarm, and an easy-read digital display. It plugs into any standard outlet with no additional mounting necessary. It also includes a battery backup, so CO is monitored even if there’s a power failure. The Peak Level feature displays the highest concentration of carbon monoxide measured since the unit was last reset. One button silences any nuisance alarms, and also tests detector functions. And an end-of-life signal enhances your safety by letting you know when it’s time to replace the unit. Keep your family safer by installing units on multiple levels and in each bedroom.

Amazon.com

Carbon monoxide (CO) is the leading cause of accidental poisoning deaths in America, yet many people don’t know they are suffering from CO poisoning until its too late. Since symptoms of CO poisoning are like the flu, you might not even know you’re in danger at first. That’s why a carbon monoxide alarm is an excellent way to protect your family. It can detect the CO you can’t see, smell or taste in the air.

The First Alert CO615 carbon monoxide alarm uses an electrochemical carbon monoxide sensor-the most accurate technology available. Installation is as simple as plugging it in to any wall outlet. Its easy-to-read backlit digital LED display gives you a clear read-out of current CO concentrations in parts per million. The alarm includes a battery back-up giving you peace of mind in a power outage. The test/silence button both silences a non-threatening alarm or low battery warning and allows you to test the unit’s functionality. The unit monitors and re-alarms if carbon monoxide levels persist sounding a loud 85-decibel horn. An audible and visual low battery signal alerts you to replace the battery and an indicator alerts you when a battery has been removed. An end-of-life alarm of three chirps alerts you to replace the unit. Two AA batteries are included. 7-year limited warranty. UL listed. –Bree Norlander

What’s in the Box
One carbon monoxide alarm, two AA batteries, and user’s manual

Product Description

The Kidde 900-0120 Is An Ac Wire-In Carbon Monoxide Alarm That Warns You And Your Family Of Dangerous Carbon Monoxide Levels. It Includes Multiple Contractor Friendly Features To Ensure Easy Installation And Minimal Troubleshooting. This Alarm Interconnects With Up To 24 Kidde Devices (Of Which 18 Can Be Initiation) Including Smoke Alarms, Co Alarms And Heat Alarms On One Wiring Network. The 900-0120 Includes A 9V Battery Backup Along With A 5-Year Limited Warranty. Battery Pull Tab Made in: United States Dimensions: 2.4 X 6 X 5.9Brand: Kidde Item Weight: 0.93includes: Unit Instruction Guide

Amazon.com

Kidde’s KN-COB-IC hardwire carbon monoxide interconnectable alarm with battery backup helps to provide your home with comprehensive protection against the dangerous threat posed by the odorless and colorless gas. With an increasing number of state and local governments passing legislation requiring CO detectors in homes, it’s never been a better time to safeguard your family against carbon monoxide exposure.

KN-COB-IC Hardwire Interconnectable CO Alarm With Battery Backup At a Glance: Adjustable mounting bracket allows for fast installation and perfect alignment Tamper-resistant locking feature deters battery and alarm theft Alkaline battery backup provides continuous protection in case of power failure Dimensions: 5.75-inch diameter and 1.8-inch depth; weighs 1 pound Five-year limited warranty

Kidde’s KN-COB-IC hardwire carbon monoxide alarm with battery backup is interconnectable with 23 other devices for comprehensive coverage. View larger

Features
The KN-COB-IC is an essential device to help warn you and your family of dangerous carbon monoxide levels in your home. This alarm measures the exposure to carbon monoxide over time; it is designed to sound at 85 decibels at 10 feet when it detects 70 ppm (parts per million) of CO for 60 to 240 minutes, 150 ppm for 10 to 50 minutes, or 400 ppm for 4 to 15 minutes. The added benefit of being able to interconnect this unit with up to 23 other Kidde devices—such as other CO alarms, smoke detectors, and heat sensors—all on one wiring network delivers extensive protection against fire and carbon monoxide (as well as peace of mind). The 9-volt battery backup provides continuous security if the power goes out. An LED lighting system on the unit signals power levels and sourcing: The green LED is steadily on when AC power is present and will flash every 7 seconds when in battery-only mode; the red LED will flash in unison with the sounder pattern for both a smoke or CO incident, and it will flash once per 30 seconds if the alarm needs service or be steadily on if the alarm is in error mode; and the amber LED will illuminate if the unit is the originating alarm in a CO incident. This device has an expected 7-year lifespan and comes equipped with a 5-year manufacturer’s limited warranty.

What’s in the Box
One Kidde KN-COB-IC hardwire carbon monoxide interconnectable alarm with battery backup.

The KN-COB-IC’s many user-friendly features make it easy to install and maintain. (Click to enlarge)

See all Product description

Product Description

The Kidde Front-Loading Smoke and Carbon Monoxide alarm (part # 21007624) offers protection from two hazards – fire and CO – in one unit. Sold under the FireX brand, this AC-wire with battery backup alarm emits a beeping tone followed by a voice warning that clearly announces the danger by saying, “Fire! Fire!” or “Warning! Carbon Monoxide!”. The uniquely designed frontloading battery compartment makes battery replacement quick and easy, and ensures proper installation. Manufactured with photoelectric sensors for detecting smoke and fire, this alarm also includes the world’s most accurate CO sensing technology based on claims by major manufacturers. Architectural and Engineering Specifications – The combination smoke and carbon monoxide alarm shall be Kidde Unit Number KN-COPE-I (part number 900-0213) or approved equal. It shall be powered by 120VAC, 60Hz source with a 9V battery backup. The temperature operating range shall be between 40°F and 100°F (4°C and 38°C) and the humidity operating range shall be 5% – 95% relative humidity. The unit shall incorporate a photoelectric smoke sensor with nominal sensitivity of 2.05%/ft. The CO sensor shall be of a fuel cell design and shall meet the sensitivity requirements of Underwriters Laboratories UL2034 Single and Multiple Station Carbon Monoxide Detectors. The unit shall qualify for UL-approved wording on the package: “World’s Most Accurate Carbon Monoxide Alarm”*. The combination alarm can be installed on the surface of any wall or ceiling following the UL/NFPA/Manufacturer’s recommended placement guidelines. The alarm can be installed on any standard single gang electrical box, up to a 4”octagon junction box. The electrical connection (to the alarm) shall be made with a plug-in connector. The unit shall provide optional tamper resistance that deters removal of the unit from the wall or ceiling. No additional pieces shall be required to activate this feature. A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement. The interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiating devices, of which 12 can be smoke alarms. With 18 initiating devices (smoke, heat, CO, etc), interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. The alarm shall include a test button that will electronically simulate the presence of smoke and CO and cause the unit to go into both modes of alarm. This sequence tests the unit’s electronics to ensure proper operation. The CO sensor will not alarm to levels of CO below 30 ppm and will alarm in the following time range when exposed to the corresponding levels of CO. 70 ppm CO Concentration 60 – 240 minutes 150 ppm CO Concentration 10 – 50 minutes 400 ppm CO Concentration 4 – 15 minutes The combination alarm shall have two methods of warning for danger: a piezoelectric horn that is rated at 85 decibels at 10 feet and a voice warning that identifies the danger. For a CO incident, the horn will sound in the repetitive manner – four (4) fast beeps, a short pause, four (4) fast beeps, a short pause. In between, the unit will announce “Warning Carbon Monoxide!” In a Smoke incident, the horn will sound in the repetitive manner – three (3) beeps, a pause, three (3) beeps, a pause. In between, the unit will announce “Fire! Fire!” The unit shall incorporate 2 LED’s. A green LED will be steady on when AC power is present, flash every 30 seconds when in thebattery only mode, every 16 seconds to indicate alarm memory, and every 2 seconds to indicate the Hush“ mode is active. A red LED will flash in unison with the sounder pattern. The unit shall include the Smart Hush feature that silences the unit for approximately 8 minutes if a nuisance alarm condition occurs. The Green LED on the alarm will flash every 2 seconds while in Smart Hush and will automatically reset itself. It also provides voice annunciation of “Hush Activated” when Smart Hush is activated and “Hush Cancelled” when the Hush cycle ends. The unit shall also indicate a low battery warning utilizing each of the following methods: a brief alarm chirp, the voice announcement of “Low Battery!” The unit shall at a minimum meet the requirements of UL 2034, UL217, NFPA72, (chapter 11 2002 edition) The State of California Fire Marshall, NFPA101 (One and two family dwellings) Federal Housing Authority (FHA), Housing and Urban Development (HUD). It shall also include a 10-year manufacturer’s limited warranty. *Claim approved by UL, based on manufacturer’s reported testing.

Amazon.com

Kidde Photoelectric Combo Alarm view larger

Alarm placements view larger

Firex 21007624 AC Wire-in Combination Carbon Monoxide & Photoelectric Smoke Alarm with Battery Back-up

The Firex Front-Loading Smoke and Carbon Monoxide alarm by Kidde (part # 21007624) offers protection from two hazards – fire and CO – in one unit. This AC-wire with battery backup alarm emits a beeping tone followed by a voice warning that clearly announces the danger by saying, “Fire! Fire!” or “Warning! Carbon Monoxide!”. The uniquely designed frontloading battery compartment makes battery replacement quick and easy, and ensures proper installation. Manufactured with photoelectric sensors for detecting smoke and fire, this alarm also includes the world’s most accurate CO sensing technology based on claims by major manufacturers.

Consumer benefits

A combination alarm provides a 2 in 1 protection against fire and carbon monoxide. Properly installed and maintained, smoke alarms are one of the best and least expensive ways to provide early warning when a fire begins. Smoke alarms save lives, prevent injuries and minimize property damage by alerting residents to a fire hazard.

Sensor Technology

This alarm uses a photoelectric sensing technology that detects visible particles associated with smoldering fires sooner than ionization alarms. Ionization alarms detect invisible fire particles associated with flaming fires sooner than photoelectric alarms. Kidde recommends that both types of alarms be installed inside the home to protect against both types of fires.

Smoke Alarm Tips

Install smoke alarms on every floor of your home, in hallways, inside bedrooms and outside of sleeping areas. On average, families have less than three minutes from the time the first smoke alarm sounds to escape a fire. The sooner you hear an alarm, the more time you will have to get out.

What’s in the box

One single Firex 21007624 AC Wire-in Combination.

At-a-glance

• Offers protection from 2 hazards, fire & CO, in 1 unit
• AC wire with battery back-up alarm emits a beeping tone followed by voice warning
• Front loading battery compartment makes battery replacement quick & easy
• Manufactured by Kidde with photoelectric sensors for detecting smoke & fire
• Alarm includes the world’s most accurate CO sensing technology

See all Product description

Product Description

The First Alert CO605 Plug-In Carbon Monoxide Detector helps protect your family with an electrochemical sensor and an 85-decibel alarm, and easily plugs into any standard outlet with no additional mounting necessary. It also includes a battery backup, so CO is monitored even if there’s a power failure. One button silences any nuisance alarms, and also tests detector functions. And an end-of-life signal enhances your safety by letting you know when it’s time to replace the unit. Keep your family safer by installing units on multiple levels and in each bedroom.

Amazon.com

Protect yourself and your family from the potentially deadly effects of carbon monoxide with the First Alert CO605 Plug-In Carbon Monoxide Alarm with Battery Backup. This easy-to-install, UL-listed alarm features advanced technology, a user-friendly design, and backup battery power to provide continual monitoring of carbon monoxide levels. It also comes complete with an “Alarm Action” chart that instructs you on what to do if the alarm sounds.

CO605 Carbon Monoxide Plug-In Alarm At a Glance: Continuously monitors and detects CO in your home Easy-to-install design; simply plugs into an outlet A/C powered with battery backup Low-battery signal; end-of-life alarm “Test/Silence” button for convenient operation

WHERE TO PLACE SAFETY PRODUCTS: Smoke Alarms: 1 in every bedroom and at least 1 on every level of the home. Carbon Monoxide Alarms: 1 on every level of the home and 1 in each sleeping area. Fire Extinguishers: 1 on every level of the home and 1 each in the kitchen and garage.

Detects the CO you can’t see, smell, or taste. View larger.

Where does carbon monoxide come from?

Carbon Monoxide: The Leading Cause of Accidental Deaths in the U.S.
Carbon monoxide, an invisible, odorless gas, is the leading cause of accidental poisoning deaths in America, yet many people don’t know they are suffering from CO poisoning until it’s too late. Because you can’t see, taste, or smell it, CO can kill you before you even know it’s there. Likewise, exposure to low levels over time can make you ill.

The Consumer Product Safety Commission recommends that every home have at least one carbon monoxide alarm with an audible warning signal–like the CO605–installed near sleeping areas. An alarm like the CO605 can detect the CO you can’t see, smell, or taste before it causes any physical harm to you or your family.

Electrochemical Technology for Accuracy and Longer Life
The CO605 uses an electrochemical carbon monoxide sensor–the most accurate CO sensor available. In comparison to more commonly available technologies, electrochemical technology is highly accurate, requires a lower amount of power, and boasts a longer life. If the CO605’s sensor detects a high concentration of CO, the unit will sound a clear, loud, 85-decibel alarm, giving you a chance to either ventilate the area or safely evacuate.

A/C Power with Battery Backup and User-Friendly Design
This unit runs on A/C power, but in case of an electrical outage, it will switch to battery operation. This gives you peace of mind during storms–when you’re more likely to use generators that could potentially give off dangerous levels of CO.

For added convenience, installation is a snap. Simply plug the CO605 into any wall outlet–with no additional mounting–and it’s ready to go. The unit features two ‘AA’ batteries to provide backup power to the monitor in the case of power disruption or outage.

Operation is equally trouble free. One button clearly labeled “Test/Silence” lets you test the unit to see if it’s running properly or silence it during a false alarm.

Continually Monitors Both CO Levels and Battery Power
To give you real peace of mind, the CO605 continually monitors CO and re-alarms if dangerous levels persist. At the same time, a low-battery signal let’s you know when it’s time to replace the backup batteries (included); a low-battery mute quiets the signal for up to eight hours. An easy, front-open compartment allows for easy battery changes without dismounting the alarm, and an end-of-life chirp lets you know when it’s time to replace the unit.

The CO605 comes with two ‘AA’ batteries and a five-year limited warranty. It also comes complete with an “Alarm Action” chart that instructs you on what to do if the alarm sounds.

What’s in the Box
Carbon monoxide alarm, two ‘AA’ batteries, and user’s manual complete with “Alarm Action” chart.

Selecting a First Alert Carbon Monoxide Alarm
Model#	CO400	CO410	CO600	CO605	CO615
Details:	Battery Operated Carbon Monoxide Alarms		Plug-In Carbon Monoxide Alarms
Power Supply	2-AA Batteries	2-AA Batteries	120-volt AC Plug-in	120-volt AC Plug-in	120-volt AC Plug-in
Battery Backup
Digital Display
Single-Button Silence/Test
EZ-Access Battery Compartment
Low-Battery Warning/Silence
Loud, 85-dB Alarm
End-of-Life Timer
5-Year Limited Warranty

Product Description

Get alerted to dangerous carbon monoxide leaks with the First Alert CO5120BN Hardwired Carbon Monoxide Alarm with Battery Backup. This carbon monoxide detector uses an advanced electrochemical carbon monoxide sensor that accurately detects elevated CO levels and comes equipped with a microprocessor that helps minimize false alarms. The alarm’s plug-in power connector makes installation quick and easy, while its tamper-resistant mounting bracket lock keeps the alarm secure. Featuring a 9-volt battery backup, this unit is designed to offer seamless detection, even in the event of a power outage. An 85-decibel horn sounds if carbon monoxide levels are too high, and a warning chirp notifies you when the battery needs to be replaced. This carbon monoxide alarm can integrate with up to 12 other First Alert or BRK hardwired alarms and up to six other compatible devices–such as bells, horns, and repeaters–making it ideal for comprehensive coverage of large households or facilities. A latching alarm indicator automatically identifies which unit in the series triggered the alarm. And thanks to the convenient test/silence button, the alarm can be checked easily to ensure it is functioning properly and false alarms can be muted easily.

Amazon.com

The BRK hardwire carbon monoxide alarm detects dangerous CO gas and allows you peace of mind with its battery backup. Carbon monoxide (CO) is a colorless, odorless, deadly gas. It can be emitted by sources including gas or oil furnaces, gas clothes dryers, water heaters, fireplaces, wood stoves, charcoal grills, gas ranges, and space heaters. A clogged chimney, improper venting, and attached garages can also cause carbon monoxide accumulation. According to the Consumer Product Safety Commission (CPSC), at least one CO alarm should be installed near a home’s sleeping area. This BRK alarm is perfect for bedrooms, as well as hallways, and basements.

The BRK CO5120BN hardwire CO alarm with battery backup includes these features:

• Quick plug-in power connector for easy installation.
• 120-volt AC inter-connectable (with maximum 18 compatible devices). The alarm can be interconnected with up to 12 other compatible smoke alarms and six compatible devices like bells, horns, repeaters and door closers. If one unit triggers an alarm, all smoke alarms in the series will sound. Power indicators show which unit in the series initiated the alarm.
• Microprocessor controlled for fewer nuisance alarms.
• Single test/silence button which both silences a non-threatening alarm or low battery warning and allows you to test the unit’s functionality.
• Automatically performs internal test of functionality.
• Latching alarm indicator which automatically identifies which unit initiated the alarm.
• Battery drawer lock and mounting bracket lock for tamper resistance.
• AC power indicator and alarm indicator light.
• Low battery warning “chirp” and missing battery tab.
• Swing open battery drawer for easy battery installation.
• 9-volt battery backup for peace of mind during power outages.

All BRK Electronics carbon monoxide alarms are listed to UL Safety Standard 2034 for residential carbon monoxide alarms. Includes 9-volt backup battery. 5-year limited warranty.–Bree Norlander

What’s in the Box
One carbon monoxide alarm, one 9-volt battery, and user’s manual

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Honeywell Carbon Monoxide Detector 8600A 1000, eg:

• What are Top 10 Honeywell Carbon Monoxide Detector 8600A 1000 for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Honeywell Carbon Monoxide Detector 8600A 1000 to buy?
• What are Top Rated Honeywell Carbon Monoxide Detector 8600A 1000 to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Honeywell Carbon Monoxide Detector 8600A 1000?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Honeywell Carbon Monoxide Detector 8600A 1000.
• Before deciding to buy any Honeywell Carbon Monoxide Detector 8600A 1000, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Honeywell Carbon Monoxide Detector 8600A 1000 and What you should consider when buying the Honeywell Carbon Monoxide Detector 8600A 1000 and Where to Buy or Purchase the Honeywell Carbon Monoxide Detector 8600A 1000. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Honeywell Carbon Monoxide Detector 8600A 1000 of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Honeywell Carbon Monoxide Detector 8600A 1000.