hometechfocus 
Nowadays, there are so many products of heating elements probe in the market and you are wondering to choose a best one. You have searched for heating elements probe in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating elements probe which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
WILLHI WH-1803B High Temperature Controller Upgraded Heating and Cooling Mode -22℉~572℉110V 15A Programmable Digital Outlet Thermostat Waterproof Probe NTC Sensor for Smoker BBQ Heat Mat Temp Control
- 【High Temperature Controller 】- Our high temperature controller Probe measurement range: -30 ~300 ℃ / -22~572 ℉.
- 【UL Certification power cable】– WILLHI Digital Temperature Controller has high quality power cable, the top quality copper wire can load large currents.
- 【Overcurrent Protection】 – Our temperature controller has very safe overcurrent breaker designing, it can shut off the heater or cooler automatically if the equipment got short circuit.
- 【High and low temperature alarm】 – Place the waterproof probe, plug the power cord in the Temp Controller . Set the maximum desired temperature for the heat mat. Alarm when temperature exceeds the limit or when sensor error.
- 【Widely Applied】 – The thermostat can be used to control a wide variety of refrigeration and heating, seedling heat mat，pet breeding，incubation，HVAC equipment, accelerating germination，electric radiator, electric oven，fermentation, grow tent, home brewing, aquarium, Smoker and BBQ, etc.
bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V – 240V 15A
Diamond Group Valterra DGR6P2PB Hott Rod Replacement Heating Element-6 Gallon Tank
Replacement heating element probe for the Hott Rod 6 gallon water heater conversion kit. Use only with the official “Hott Rod”.
Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays ITC-1000
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
279838 Dryer Heating Element 279816 3392519 Thermal Fuse Cutoff Kit 5400W 240V for Whirlpool Kenmore KitchenAid Maytag Estate Replaces # 3403585 279837 8565582 3398064 3403585 AP3094254 W10724237
- Package Included: 1x 279838 Dryer heating element assembly, 1x 279816 Thermal Fuse & Thermostat Kit, 1x 3392519 Thermal Fuse.
- ✅【Ideal Replacement】: Want new 279838 Dryer Heating Element Thermal Fuse Cutoff Kit that matches the original? This dryer Heating Element was specifically designed to look and function the same as the original on your Dryer. While this is NOT a genuine Whirlpool & Kenmore part, it is a direct replacement and it will appear, fit and work like the factory part.
- ✅【Replacement Dryer Heating Element】 – This dryer heating element is made from high-quality materials and components. It also includes a two-pin connector that plugs directly into the appliance, meets or exceeds OEM standards, 100% tested before shipping. Replaces the component in your dryer. Helps to restore the functionality of a compatible machine when the electric dryer has stopped heating.
- ✅【Compatible】: Designed to fit specific Whirlpool & Kenmore manufactured electric dryer models, also compatible Maytag, KitchenAid, Amana. In addition, the parts fit for Kenmore 1037777000 1037777020 1037777040 1037777060 Gas Range and Kenmore 1038017050 1038517050 Optional Continuous Clean Oven Liner Kit.You can send us Dryer Models Number, we can help you to confirm if it can work or not.
- ✅【Replaces Numbers】: 279838 Dryer heating element assembly replaces 3403585 279837 8565582 3398064 3403585 AP3094254 W10724237 279838A 279838VP. 279816 Thermal Fuse & Thermostat Kit replaces 3399848 3977393 2651 AP3094244 PS334299 EAP334299. 3392519 Thermal Fuse Replaces WP3392519 3388651 694511 80005 ET401 G4AP0500 3392519. the replacement parts is a direct replacement for your dryer.
- ✅【Buy with Confidence】: Order from KONDUONE, you can return or exchange within 3 months, true worry-free shopping experience. If the Dryer Heating Element Thermal Fuse Cutoff Kit ever fails on your Whirlpool & Kenmore Dryer simply contact us for a replacement.
How To Test 279838 Heating Element:
To test your heating element you will need to first remove the heating element from the dryer. With the element removed from the dryer, do a visual inspection of the element. Often times you will be able to see a break in the heating coil. Sometimes it even helps to grab each section of the coil and wiggle it to make sure there isn’t a break in it. If you can’t see a break in the coil, then you will need an Ohm meter or Multi-Meter to test the heating element. Place one probe on each terminal of the heating element, you should get a reading of approximately 10 ohms on a good element. If you get no resistance, then the element is damaged and need to be replaced.
279838 Dryer heating element assembly – 5400 watt 240 volt. Transfer the high limit thermostat from your old heating element over to the new element. Don’t settle for lower quality heating elements.
Replaces 3403585 279837 8565582 3398064 3403585 AP3094254 W10724237 279838A 279838VP
279816 Thermal Fuse & Thermostat Kit – Dryer thermal fuse (thermal cut-off) 309 degrees and high limit thermostat 250 degrees kit – Wiring is used if your old high limit thermostat has one terminal that presses onto the heating element. Includes thermal fuse, thermostat, screws, wiring kit, and instructions. Make sure to check your dryer vent for any restrictions.
Replaces 3399848 3977393 2651 AP3094244 PS334299 EAP334299
3392519 Thermal Fuse – Dryer non resettable thermal fuse, two 3/16″ wire terminals. This fuse is located on the blower housing next to the blower fan. If the dryer overheats, the thermal fuse blows to cut off power to the dryer and/or stop the dryer from running.
Replaces WP3392519 3388651 694511 80005 ET401 G4AP0500 3392519
KONDUONE always offer the best customer service to his customers.If you have any problem about your order,please feel free to contact us.
soldbbq Hot Probe Rod Replacement for Traeger Wood Pellet Grills, Single, 200 Watt, 120 Volt, 24" Wire, 3” x ⅜” High Density Heating Element
- Designed for a quick connection, once properly installed, reigniting your grill will be as simple as flipping a switch. 200 watt/120 volt, 24” wire lead hot rod goes into the base of the firepot.
- An identical match to the OEM hot stick. Compatible with all Traeger grills except for their PTG model. When your current hot rod shortens or burns out, this replacement part will ensure that your grill continues to operate effectively. 3” x ⅜” high density cartridge heating element replacement.
- Quickly lighting your wood and keeping the fire lit for quality grilling. Your grill simply won’t work without a functioning hot rod. Don’t settle for lighter fluid or propane torches that sacrifice the flavor quality of your grilled meats, smoked ribs, and other barbequed mainstays
- TIP: Sometimes, the burnt out hot rod may be difficult to remove. Cutting off the end with a pair of diagonal pliers as swelling often occurs. Taping a wire onto the electrical connector before removal may also make the entire process go smoother. For best performance, only ⅛ to ¼” of the wire should be visible once the replacement cartridge is in place.
- 90-DAY 100% MONEY BACK GUARANTEE!
Replacement Hot Rod, For your Traeger Grill
Compatible with All Traeger grills, such as Traeger 070, 075, Texas Elite Series, Pro Series, also fits for Pit Boss
Dernord 240V 5500W Tri-clamp Ripple Heating Element Stainless Steel Immersion Water Heater with 3-Wire Electrical Locking Plug (1.5 Inch Tri clamp)
- With 3-Wire Electrical Locking Plug, grounded for your safety
- Easy to Install and fits Standard 1.5″ Inch (Ferrule OD 50.5mm) tri-clamp coupler of American
- SUS304 Tri-clamp Ripple Foldback heating element provides 5500w 240v of power
- The shape is to minimize length and maximize heated surfaces
- Resists dry firing, lime deposits, and sand that would burn out ordinary elements
Product Features
5500W Tri-clamp Ripple Foldback heating Element : Replacement American standard water heater parts
From the Manufacturer
Dernord 240V 5500W Tri-clamp Ripple Heating Element Stainless Steel Immersion Water Heater with 3-Wire Electrical Locking Plug has a compact, energy efficient design that is well suited for many applications. The element is folded back to minimize length and maximize the heated surface.It provides uniform heat distribution and offered long performance life, and fits more models of American,for Bradford White, Craftmaster, General Electric and Whirlpool heaters.
Technical Details
Voltage: 240V
Wattage: 5500W
Color: Silver
Tube length: 335mm
Tube diameter: 8mm
Ferrule OD Size:50.5mm
BN-LINK Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding Incubation Greenhouse, 40-108°F, 8.3A 1000W ETL Listed
- ✓ EFFORTLESS HEATING SETUP: Simply set the temperature probe, plug-in the controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius.
- ✓ EASE OF MIND: Handy LED heating and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
- ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6 feet in length, designed to suit almost any application you can imagine.
- ✓ Century to BN-LINK: Your product might come in the brand of BN-LINK or Century as we are currently rebranding to BN-LINK. Please be assured that the quality remains the same.
- ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version
- WE’VE IMPROVED THE CONTROLLER: simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now.
- KEEP TEMP IN DESIRED RANGE: Turn on your device at a set degree and turn it off at another set degree. The difference of the 2 degrees can be minimum 0.1 and maximum 288.
- HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller .
- MAX LOAD: 1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
- WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc . Total Outlet: 1
The WH1436 temperature controller can turn on/off an electric appliances at desired temperature.
For example, you can use the controller to turn on a heater at 99.9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45.3 F.
(Please be noted that the controller itself doesn’t change temp. You need to use heater or refrigeration equipment with it.)
Main features:
1-YEAR WARRANTY: From the date of purchase.
Plug and play. No worry about wiring.
Maximum load: 880W @110V or 1960W @240V.
Heating OR refrigeration working mode.
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Auto shut off timer(It doesn’t turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0.)
Specification:
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58 ~ 230 F(-50 ~ 110 C)
3.Temperature resolution: 0.1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 0.1 – 230(difference between turn-on degree and turn-off degree)
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9×3.6×1.8 inch (12.5×9.1×4.5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
3.Auto shut off timer(Default:OFF)
Package Content:
1x WH1436A Temperature controller
1x sensor cable
Conclusion
By our suggestions above, we hope that you can found heating elements probe for you.Please don’t forget to share your experience by comment in this post. Thank you!
