hometechfocus 
Nowadays, there are so many products of heating cable constant wattage in the market and you are wondering to choose a best one. You have searched for heating cable constant wattage in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating cable constant wattage which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
HEATIT HISD 15-feet Pipe Heating Cable with Built-in Thermostat
- Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues.
- Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
- Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
- Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight.
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
Similar items with 4 stars and above
King Electric CWR800-160 Constant Wattage Roof/Gutter De-Icing Heating Cable, 120-Volt, 5-Watts/Ft. with Plug 160-Feet
CWR Series Constant Wattage Roof/Gutter De-Icing Heating Cable is designed to prevent costly roof damage caused by ice damns forming and helps maintain free flowing water through gutters and downspouts to the ground level. Requires no special wiring or assembly. Simply run cable per the instructions for both shingle and metal roofs. Size range from 20 ft to 240 ft to accommodate most roofs. Systems include roof clips and spacers. Operating at 8W per linear foot and pre-assembled with a 6 foot cold lead with grounded 120V plug and end-splice.
Similar items with 4 stars and above
King Electric CWP021-3 Constant Wattage Pipe Trace Heating Cable, 120-Volt, 7-Watts/Ft. with Thermostat and Plug, 3-Feet
CWP series constant wattage pipe trace heating cable is designed to prevent pipes from freezing, keeping water flowing to -40 Degree F. The CWP series requires no special wiring or assembly. Simply run cable straight along pipe and valves according to instructions in package. Sizes range from 3 feet to 80 feet to accommodate most pipe lengths.
KING CWR1200-240 Constant Wattage Roof/Gutter De-Icing Heating Cable, 120-Volt, 5-Watts/Ft. with Plug, 240-Feet
KING CWR600-120 Constant Wattage Roof/Gutter De-Icing Heating Cable, 120-Volt, 5-Watts/Ft. with Plug, 120-Feet
King Electric CWP063-9 Constant Wattage Pipe Trace Heating Cable, 120-Volt, 7-Watts/Ft. with Thermostat and Plug, 9-Feet
CWP series constant wattage pipe trace heating cable is designed to prevent pipes from freezing, keeping water flowing to -40 Degree F. The CWP series requires no special wiring or assembly. Simply run cable straight along pipe and valves according to instructions in package. Sizes range from 3 feet to 80 feet to accommodate most pipe lengths.
KING CWR1000-200 Constant Wattage Roof/Gutter De-Icing Heating Cable, 120-Volt, 5-Watts/Ft. with Plug, 200-Feet
KING CWR500-100 Constant Wattage Roof/Gutter De-Icing Heating Cable, 120-Volt, 5-Watts/Ft. with Plug, 100-Feet (Renewed)
King Electric CWP168-24 Constant Wattage Pipe Trace Heating Cable, 120-Volt, 7-Watts/Ft. with Thermostat and Plug, 24-Feet
CWP series constant wattage pipe trace heating cable is designed to prevent pipes from freezing, keeping water flowing to -40 Degree F. The CWP series requires no special wiring or assembly. Simply run cable straight along pipe and valves according to instructions in package. Sizes range from 3 feet to 80 feet to accommodate most pipe lengths.
KING CWR500-100 Constant Wattage Roof/Gutter De-Icing Heating Cable, 120-Volt, 5-Watts/Ft. with Plug, 100-Feet
Conclusion
By our suggestions above, we hope that you can found heating cable constant wattage for you.Please don’t forget to share your experience by comment in this post. Thank you!
