hometechfocus 
Nowadays, there are so many products of cooling lathe pump in the market and you are wondering to choose a best one. You have searched for cooling lathe pump in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cooling lathe pump which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
ChgImposs Mist Coolant Mist Lubrication System Unit, Metal Cutting Engraving Cooling Sprayer Machine with Air Pipe for CNC Lathe Milling Drill Machine
- Whole Length: 350mm / 13.78in
- Cardan Joint Diameter: 5mm / 0.2in
- Extend the live of the machine, update the precision of processing. Decrease the fee of the operation and effect of process.
- Can save the cooling liquid in the range of 80%, good cooling effect. Can decrease the liquid waste which influence the circumstance.
- In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2.
- Great for CNC lathe milling drill machine. Usually used in lathe, milling, grinding, drilling, boring, and tapping processing.
【The Best Deal】OriGlam Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill
- √ Great Value – Processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled.
- √ Working Safer – Gas processing chips are blown away, working safer
- A lot of water problem solving tools, easier to clean up.
- √ Save Time – Not only increases the machining cutting speed, save time and reduce processing costs and tool wear.
- √ Easy To Use – Air flow and spray mist volume adjustable design, easier to use.
- √ Widely Used – In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2.
Cutting Cooling Mist Coolant Lubrication Spray System Sprayer Metal Hose for Metal CNC Router Cutting Engraving Lathe Milling Machine
- This product has obtained the national patent, widely used in CNC lathe, general lathe, drilling machine, tapping machine, grinding machine, tool grinding machine, NC, CNC machine, punching machine, sawing machine, milling machine
- Cooling the processing solution can save more than 80%, the cooling effect is no less than the conventional water-cooled.
- Gas processing debris was blown away, processing more secure.
- The spray coolant gas and cooling liquid is adjustable, easy to use on different processing conditions.
- Metal hose, long life.
Upgrade Version Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill
- The nebulizer gas and coolant is adjustable, easy to use on different processing conditions
- Gas processing chips are blown away, working safer
- A lot of water problem solving tools, easier to clean up
- Widely Used – In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2.
- Not only increases the machining cutting speed, save time and reduce processing costs and tool wear
- Even the super-hard alloy precision machining the workpiece can achieve a smooth surface
NOTES:
1. Clean the liquid shall be used
2. Do not use liquid-corrosive
3. In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2(atomization and gas, associated gas pressure)
4. Use the liquid viscosity at 68cSt or less
Product Size:
50 x 30 x 20mm / 2 x 1.2 x 0.8inch
Hose about 1.5m
Package Weight: 200g / 6.9oz
Package Include:
1 x Mist Coolant Spray System
Features:
Size: 36.5cm(L)
Hose: about 1.5m
Material: Plastic+metal+brass
Fitment:
For 8mm air pipe
For CNC Lathe Milling Drill Machine.
Cooling stone / metal / ceramic tile engraving machine.
【The Best Deal】OriGlam Mist Coolant Mist Lubrication, Spray System Unit Used for CNC Lathe Milling Drill Machine
- √ Multi-function – Set multi function all in one,cooling,lubrication and blowing the metal chips, gas processing chips are blown away, working safer.
- √ Great Value – Save 60-80% lubricants compared with the oldest lubrication tube.
- √ Easy Operation – Engraving machine spray cooling,Special design,direction of rotation,easy to operate.
- √ Long-term Use – Standard fixing device,fine spray port, long life. Cooling stone/metal/ceramic tile engraving machine.
- √ Widely Used – Great for CNC Lathe Milling Drill Machine. Usually used in lathe, milling, grinding, drilling, boring, and tapping processing.
Features:
Mist coolant spray system.
Air flow and spray mist volume adjustable design,easier to use.
Save 60-80% lubricants compared with the oldest lubrication tube.
Set multi function all in one,cooling,lubrication and blowing the metal chips.
Installed on CNC lathe,milling machine for improving machine ability, cutting speed, and extending tool service life, Saving working time and production cost.
Weight: 178g / 6.28g
Material: Plastic + metal
Length: 375mm / 14.76in
Air Hose Length: 125cm / 49.21in
Air Pipe Interface Size: 8mm / 0.31in
Package Weight : 170 G / 6.00 Ounces
Package Dimensions (L*W*H) : 180*140*50 MM / 7.09*5.51*1.97 Inches
Package Include:
1 x Mist Coolant Spray System
Mist Coolant Lubrication Spray System For 8mm Air Pipe CNC Lathe Milling Drill
- a lot of water problem solving tools, easier to clean up.
- processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled.
- gas processing chips are blown away, working safer.
- the nebulizer gas and coolant is adjustable, easy to use on different processing conditions
- ven the super-hard alloy precision machining the workpiece can achieve a smooth surface
Description:
Engraving machine spray cooling,Special design,direction of rotation,easy to operate.
Standard fixing device,fine spray port, long life.
Specification:
Material:plastic&metal&brass
Size:36cm(L),hose about 1M.
Fit for 8mm air pipe
Cooling stone/metal/ceramic tile engraving machine.
For CNC Lathe Milling Drill Machine.
Features:
1) a lot of water problem solving tools, easier to clean up.
2) processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled.
3) gas processing chips are blown away, working safer. 4) the nebulizer gas and coolant is adjustable, easy to use on different processing conditions.
5) Even the super-hard alloy precision machining the workpiece can achieve a smooth surface
6) not only increases the machining cutting speed, save time and reduce processing costs and tool wear.
NOTES:
1. Clean the liquid shall be used.
2. Do not use liquid-corrosive.
3. In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2
(atomization and gas, associated gas pressure).
4. Use the liquid viscosity at 68cSt or less.
Package include:
1x Mist Coolant System
LITTLE GIANT VMC-1 Machine Coolant Tank System
- 115 v, 108 gph at 1-foot
- The flow of coolant liquids can be regulated to any desired amount or completely shut off without harmful effects to the motor
- Tanks are made of oil resistant polyethylene
- Screen chip collector is easily removed for fast cleaning
- Designed for use with drill presses, tool grinders, tapping machines, cut-off saws, bench mills, and lathes
Cast Aluminum Immersion Coolant Pump Cooling Water Pump 40W 380V
- ★The use of high-quality cold-rolled silicon steel sheet.Cast aluminum, good structure, not easy to break, strong machine cooling pump, the flow is more than twice the normal, head high.
- ★Unique suction suction water, not easy to be iron and other foreign objects stuck.Waterproof design is good, strong sealing, quiet effect, all-in-one structure.
- ★The shaft is quenched and tempered, it will not bend and bend, the water will not be brought into the motor, causing the motor to burn.
- ★The appearance of the spray process, corrosion-resistant, bright, smooth.High-quality B-class copper enameled wire 130 degrees temperature, stability, higher performance.
- ★Continuous working time up to 6 months or more, energy efficient, stable operation.
All the products are shipped from US warehouse(CA or NJ)!
All the products are shipped from US warehouse(CA or NJ)!
All the products are shipped from US warehouse(CA or NJ)!
Feature:
DB-12A 40W 380V
1. Continuous working time up to 6 months or more, energy efficient, stable operation.
2. Cast aluminum, good structure, not easy to break, strong machine cooling pump, the flow is more than twice the normal, head high.
3. Unique suction suction water, not easy to be iron and other foreign objects stuck.
4. Waterproof design is good, strong sealing, quiet effect, all-in-one structure.
5. The shaft is quenched and tempered, it will not bend and bend, the water will not be brought into the motor, causing the motor to burn.
6. The use of high-quality cold-rolled silicon steel sheet.
7. The appearance of the spray process, corrosion-resistant, bright, smooth.
8. High-quality B-class copper enameled wire 130 degrees temperature, stability, higher performance.
DB-12A Coolant Pump 40W 380V Cooling Water Pump for Lathe Grinder & Mill
- ★The use of high-quality cold-rolled silicon steel sheet.Cast aluminum, good structure, not easy to break, strong machine cooling pump, the flow is more than twice the normal, head high.
- ★Unique suction suction water, not easy to be iron and other foreign objects stuck.Waterproof design is good, strong sealing, quiet effect, all-in-one structure.
- ★The shaft is quenched and tempered, it will not bend and bend, the water will not be brought into the motor, causing the motor to burn.
- ★The appearance of the spray process, corrosion-resistant, bright, smooth.High-quality B-class copper enameled wire 130 degrees temperature, stability, higher performance.
- ★Continuous working time up to 6 months or more, energy efficient, stable operation.
All the products are shipped from US warehouse(CA or NJ)!
All the products are shipped from US warehouse(CA or NJ)!
All the products are shipped from US warehouse(CA or NJ)!
Feature:
– Continuous working time up to 6 months or more, energy efficient, stable operation
– Cast aluminum, good structure, not easy to break, strong machine cooling pump, the flow is more than twice the normal, head high
– Unique suction suction water, not easy to be iron and other foreign objects stuck
– Waterproof design is good, strong sealing, quiet effect, all-in-one structure
– The shaft is quenched and tempered, it will not bend and bend, the water will not be brought into the motor, causing the motor to burn
– The use of high-quality cold-rolled silicon steel sheet
– The appearance of the spray process, corrosion-resistant, bright, smooth
– High-quality B-class copper enameled wire 130 degrees temperature, stability, higher performance
KPfaster Water Coolant Pump Cooling Water Pump Water Cooling System Tool Coolant Pump for Lathe Grinder Mill Machine DB-12A 40W 380V
- ★The use of high-quality cold-rolled silicon steel sheet.Cast aluminum, good structure, not easy to break, strong machine cooling pump, the flow is more than twice the normal, head high.
- ★Unique suction suction water, not easy to be iron and other foreign objects stuck.Waterproof design is good, strong sealing, quiet effect, all-in-one structure.
- ★The shaft is quenched and tempered, it will not bend and bend, the water will not be brought into the motor, causing the motor to burn.
- ★The appearance of the spray process, corrosion-resistant, bright, smooth.High-quality B-class copper enameled wire 130 degrees temperature, stability, higher performance.
- ★Continuous working time up to 6 months or more, energy efficient, stable operation.
Warranty:
12 months money back and free replacement. If you have any problems, feel free to contact us.
We will respond within 24 hours and try to help you the best!
Feature:
DB-12A 40W 380V
1.Continuous working time up to 6 months or more, energy efficient, stable operation.
2.Cast aluminum, good structure, not easy to break, strong machine cooling pump, the flow is more than twice the normal, head high.
3.Unique suction suction water, not easy to be iron and other foreign objects stuck.
4.Waterproof design is good, strong sealing, quiet effect, all-in-one structure.
5.The shaft is quenched and tempered, it will not bend and bend, the water will not be brought into the motor, causing the motor to burn.
6.The use of high-quality cold-rolled silicon steel sheet.
7.The appearance of the spray process, corrosion-resistant, bright, smooth.
8.High-quality B-class copper enameled wire 130 degrees temperature, stability, higher performance.
Conclusion
By our suggestions above, we hope that you can found cooling lathe pump for you.Please don’t forget to share your experience by comment in this post. Thank you!
