hometechfocus 
Nowadays, there are so many products of cooling fan raspberry pi zero w in the market and you are wondering to choose a best one. You have searched for cooling fan raspberry pi zero w in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cooling fan raspberry pi zero w which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
MakerFocus 4pcs Raspberry Pi 4B Fan DC Brushless Cooling Fan 3.3V 5V Heatsink Cooler Radiator Connector Separating One-to-Two Interface for Raspberry Pi 4/ Pi 3/3B+ and Pi Zero/Zero W or Other Project
- √ Installation Screws Included: Don’t need to purchase screws by yourself. Intimate service, easy to install!
- √ Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you. Perfect Cooling Tool: Allows your Raspberry Pi or other experimental tools to quickly dissipate heat and will extend the working life of your Pi or other development boards!
- √ Unique Terminal Interface: It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V. According to the voltage requirements in accordance with your needs to choose to use
- Working voltage: 3.0-5.8V
- Current: 0.18A. Air volume: 5m³ / h
- Number of revolutions: 13200RPM.
- √ Suitable for A Variety of Products: Pi fan, Raspberry Pi zero w heatsink, suitable for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, Retroflag NESPi case and Nespi Case. Not necessarily using them for Raspberry Pi but rather for cooling of a desert traversing robot project. It just another addition to them fleet. Will works wonderfully!
- √ Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!
4pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project
Features:
This Pi fan not only support Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, but compatible with other development board.
Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5m³ / h
Number of revolutions: 13200RPM
Noise: 18 dB
Package Including:
4 * pi fan
16 * nuts M2.5
16 * screw M2.5 * 14mm
Similar items with 4 stars and above
Raspberry Pi Fan,4PCS Raspberry Pi Cooling Fan (30x30x7mm) DC Brushless Heatsink Cooler Fan,One-to-Two Interface 3.3V 5V for RPi Zero/Zero W/Pi 2/Pi 3/3B+
- No noise:Raspberry Pi Cooling Fan is quiet when working,will not make you feel uneasy during working, but also a quiet experiment environment for you.
- Perfect Cooling Tool: Allows your Raspberry Pi or other experimental tools to quickly dissipate heat and will extend the working life of your Pi or other development boards!
- Unique Terminal Interface: It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V. According to the voltage requirements in accordance with your needs to choose which to use.
- Easy operation:Supplied with Installation Screws, Don’t need to purchase screws by yourself.easy to install! Working voltage: 3.0-5.8V
- Current: 0.18A. Air volume: 5 m3 / h
- Number of revolutions: 13200RPM.
- Friendly Customer Service: We provides 60 days money back guarantee for any reasons.and 24 hours customer service.
Raspberry Pi Fan Raspberry Pi Cooling Fan 4Pcs Raspberry Pi DC Brushless Heatsink Cooler Fan
Description:
This Pi fan connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Size (L x W x H): 3 x 3 x 0.7 cm
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5 m3 / h
Number of revolutions: 13200RPM
Noise Level: 18dba±10%
Package Including:
4 * pi fan
16 * nuts M2.5
16 * screw M2.5 * 14mm
Similar items with 4 stars and above
Aokin 4 PCS Raspberry Pi Fan 30x30x7mm Cooling Fan Brushless CPU Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 4 Pi 3 B+, Pi 3, Pi 2, Pi 1 B+
- ????Suitable for A Variety of Products: Pi fan, 30x30x7mm Raspberry Pi zero w heatsink, suitable for Raspberry Pi 4 Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, Retroflag NESPi case and Nespi Case. Not necessarily using them for Raspberry Pi but rather for cooling of a desert traversing robot project. This fan gives a smooth and quick working performance, which will provide you a perfect working space.
- ????Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you. Perfect Cooling Tool: Quickly dissipate heat for your Raspberry Pi or other experimental tools to and extend the lifespan of your Pi or other development boards.
- ????Unique Terminal Interface: It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V. According to the voltage requirements in accordance with your needs to choose to use
- Working voltage: 3.0-5.8V
- Current: 0.18A. Air volume: 5m³ / h
- Number of revolutions: 13200RPM.
- ????Installation Screws Included: Don’t need to purchase screws by yourself. Screws Included. Fast installation in seconds. Intimate service, easy to install!
- ????Sleeve fan suitable for Raspberry Pi 4 and 3 B+. One-to-Two wire connector Interface for dual speed mode (3.3V and 5V DC), Compatible with other robotic projects and development boards
Aokin 4pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 4 Pi 2/Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project
Features:
This Pi fan not only support Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, but compatible with other development board.
Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5m³ / h
Number of revolutions: 13200RPM
Noise: 18 dB
Package Including:
4 * pi fan
16 * nuts M2.5
16 * screw M2.5 * 14mm
GeeekPi Raspberry Pi 3 B+ Cooling Fan, Raspberry Pi Aluminum Heatsink Cooling Kit for Raspberry Pi 3B+ (B Plus)
- Compatible with Raspberry Pi 3 B+（B Plus）
- It’s compatible with most of cases in the market
- Use CNC Machining manufacturing technology for Aluminum heatsink
- With 2pcs little thermal tapes to attach to the CPU and LAN tightly for better dissipation
- The cooling fan updated to 3510 version and it will be more quiet and powerful for heat dissipation of Raspberry Pi Board
- NOTE:Raspberry Pi Board Not Included!
- Package Includes: 1x Cooling Kit( Aluminum Heatsink with Cooling Fan), 1x Think Copper Heatsink, 2x Thermal Tapes
Extreme Cooling Fan Kit For Raspberry Pi 3B+
Description
3510 Version Extreme Cooling Fan Kit For Raspberry Pi 3B+ is a brandnew Cooling system for your Raspberry Pi 3B+.
It’s a completely new radiator, and it’s a very cool cooling system after the armor shell.
The fan is 3510 version and more powerful but still quite when it is running.
Two aluminum blocks will touch the MCU tightly and good for the heat dissipation.
It’s with good-looking appearance, and easy to assemble.
Package Includes
1x Cooling Kit( Aluminum Heatsink with Cooling Fan)
1x Thin Copper Heatsink
2x Thermal Tapes
iUniker Raspberry Pi 4 Fan, Raspberry Pi Dual Fan with Raspberry Pi Heatsink, Raspberry Pi Fan for Raspberry Pi 4 Model B, 3B+/Pi 3 B/Pi 2 B
- NOTICE: It can’t fit Retroflag Nespi Case and Case+, if you want use our dual fan in this case, you should modifiy the Retroflag Case and breaking the tabs on the single fan location.
- Efficient drop temp of your Pi by using our heatsink fan.
- Custom size fan can fit most of the raspberry Pi case.
- Custom 3M heat conductive strip can make sure you Pi works stable when you are overclocking.
- Upgrade bearing of this fan not only can make sure outputing a lot of wind,but also quiet enough.
Raspberry Pi Fan, BCZAMD Raspberry Pi DC 5V 3.5V Cooling Fan Brushless 2Pin Heatsink Cooler 30 x 30 x 7MM for RPi Zero/Zero W/Pi 2/Pi 3/3B+, for RetroFlag NESPI Case, Orange Pi 3D Printer Part, 4Pcs
- This cooling fan is for raspberry pi.
- You can choose 5v or 3.3v by connect different pins on raspberry pi.
- The raspberry pi cooling fan work almost noiseless in 3.3V, and with little sound in 5V.
- The wind power is stonger in 5V.
- Use for: Raspberry Pi 3 B+/3/2/B+, for NESPi Case, for Orange Pi or other robot project and development boards.
We are professional 3D printer parts manufacturer, if you have any technical problem with our product, please feel free to contact us, our engineers of technical team will always support you here.
After-sales guarantee:
each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you
Specifications:
1. Size: 30 x 30 x 7 mm
2. Voltage: DC 3.3V 5V to choose
3. Current: 0.18A
4. Wire Length: 2.6 inches (66mm)
5. Connector: One-to-Two pin
Package includes:
4 x RPI Fan Cooling
Nuts M2.5, Screw M2.5 * 14mm not included!!!
Dorhea Raspberry Pi 4 B Case, Raspberry Pi Rack Cluster Case Stacking Case with Cooling Fan and Fan Cover for Raspberry Pi 4,Raspberry Pi 3 Model B B+, Raspberry Pi 2 Model B,Pi B+ (5-Layers)
- This is a new cluster case,it has 5-layer of transparent acrylic case,easy to assemble and perfect fit with your Raspberry Pi.
- Raspberry pi case is open on all sides with each acrylic layer containing built in air vent and fan to allow for maximum air flow for each Raspberry Pi
- Access to all GPIO port ,semi-enclosed cases can easy to increase everything you want to get it in. Allow the USB ports, flex cable, camera module and so on
- Compatible with Raspberry Pi 1 model A/B/A+/B+, Pi 2 model B, Pi 3 model B/B+, Pi 4 B, Pi zero/zero w
- This acrylic case is a DIY stacking case, you can assemble it to the one layers/ two layers/ three layers/ four layers/ five layers you need, adding more joy for your Raspberry Pi
5-layer of transparent acrylic case, easy to assemble and perfect fit with your Raspberry Pi.
It is easily to access to the board,the power,RCA Video,the Audio,USB,SD card and light pipes and so on.
5-layer Protective cover with cooling Fans provides the best protection for your raspberry pi.
It’s perfect for program learning and observe the data at the same time. Great way to get a lot of Pi’s working together.
This is a stacking case. It can divide to 1,2, 3, 4 ,5 cases. It’s really multifunctional.
Packing List:
1 X 5-layer Acrylic Shell (4 pieces of panels)
5 X Mini Fans (with install screws pack)
5 X Metal fan protection cover
1 X Install screws pack
Note:
Raspberry pi motherboard is not included.
Please remove the protective film before using it.
Raspberry Pi Kit, Aokin Raspberry Pi Cooling Fan 30x30x7mm Brushless CPU Cooling Fan and Raspberry Pi Heatsink Set 1 Aluminum + 2 Copper for Raspberry Pi 3 B+, Pi 3 B, Pi 2 B, RetroFlag NESPI Case
- Fan Connector: 2 pins, Rated Voltage: DC 5V, Working Voltage: DC 3.0-5.8 V.
- Fits perfectly for Raspberry Pi 3 Model B+, Pi 3 Model B, Pi 2 Model B, RetroFlag NESPI Case.
- Easy to install the fan by screws (length: 15 mm), the heat sinks with adhesive on the back for efficient thermal transfer.
- The cooling fan runs smoothly, work almost noiseless and meet your daily requirements, can keep CPU safe without overheating.
- 1 x Cool Fan Size (L x W x H): Approximately 30 x 30 x 7 mm + 3 x heatsinks lower your CPU/LAN/RAM chips temp well, Wire Length: 75 mm.
Heat Sink Feature:
Material: 1 x Aluminum, 2 x Copper
Short enough to fit within standard Raspberry Pi cases.
Include adhesive real thermal tape for efficient thermal transfer.
Dimensions:
90x70x120 mm (L*W*H)
120x130x50 mm (L*W*H)
120x120x10 mm (L*W*H)
Cooling Fan Feature:
Color: Black
Current: 0.1 A
Connector: 2 pin
Wire Length: 75 mm
Working Voltage: DC 3.0-5.8 V
Size (L x W x H): 30 x 30 x 7 mm
Airflow: 5 m³/h
Bearing Type: Sleeve
Speed: 6000 RPM ± 10%
Noise Level: 16 dB ± 10%
Package Included:
1 pcs Copper Heat Sink
1 pcs Copper Heat Sink
1 pcs Aluminum Heat Sink
1 pcs Cooling Fan
1 pcs Screw Sets
Use for Raspberry Pi 3B+/3B/2B, NESPI Case, Orange Pi etc.
This is new mode fan for raspberry pi, since the fan is powerful, so it will be a little noisy (10~15dB) but reduce heat better when you connect to the 5V voltage, if you feel it is noisy, please connect the fan to 3.3V voltage of your Pi, the fan work almost noiseless in 3.3V and meet your daily requirements.
Many thanks for your understanding, If there are any questions, please feel free to contact us via Amazon, we will do our best for you.
Hongzer OLED Display HAT, OLED Expansion Board, 1.3 inch OLED Display HAT Expansion Board for Raspberry Pi 2B/3B/Zero/Zero W, Computer Components
- Based on the standard interface design of for Raspberry pi, it is compatible with for Raspberry Pi 2 generation B/3 generation B/Zero/Zero W.
- Support 4-wire SPI, 3-wire SPI and I2C three kinds of interfaces. The mode of communication can be selected through resistance.
- Small size, high resolution, high definition display.
- Board with a joystick and three pushbuttons, simple and practical.
- Provide a complete set of supporting materials manual (For Raspberry/For Arduino/STM32 and other sample programs).
Specifications:
Material: PCB
Drive Chip: SH1106
Support Interface: 4-wire SPI, 3-wire SPI, I2C
Display Color: Blue
Resolution: 128×64
Operating Voltage: 3.3V
Size: Approx. 6.5 * 3 cm / 2.6 * 1.2 in
Package list:
1 x 1.3 inch OLED Expansion Board
1 x RPi Copper Column Package (2PCS/set)
Raspberry Pi Fan, AiTrip Raspberry Pi Cooling Fan 30x30x7mm Brushless CPU Cooling Fan for Raspberry Pi 3 B+, Pi 3, Pi 2, Pi 1 B+, RetroFlag NESPI Case (2pcs Raspberry Pi Fan)
- Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you. Perfect Cooling Tool: Allows your Raspberry Pi or other experimental tools to quickly dissipate heat and will extend the working life of your Pi or other development boards!
- Suitable for A Variety of Products: Pi fan, Raspberry Pi zero w heatsink, suitable for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, Retroflag NESPi case and Nespi Case. Not necessarily using them for Raspberry Pi but rather for cooling of a desert traversing robot project. It just another addition to them fleet. Will works wonderfully!
- Unique Terminal Interface: It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V. According to the voltage requirements in accordance with your needs to choose to use
- Working voltage: 3.0-5.8V
- Current: 0.18A. Air volume: 5m³ / h
- Number of revolutions: 13200RPM.
- Installation Screws Included: Don’t need to purchase screws by yourself. Intimate service, easy to install!
- The fan not only support Raspberry Pi 2 and Pi3 but compatible with other DIY project.
Suitable for Raspberry Pi B / Raspberry Pi B+ / Raspberry Pi A+ / Raspberry Pi 2 and Pi 3 Model B / Raspberry Pi 3 B+
Bearing Type: Sleeve
Size (L x W x H): 3 x 3 x 0.7 cm
Connector: 2 pin
Rated Voltage: DC 3.0-5.8V
Current: 0.1A
Speed: 6000RPM±10%
Airflow: 5m³/h
Noise Level: 18dba±10%
Wire Length: 60 mm
Color: Black
Package Includes:
2x iUniker Cooling Fan
2x Screw Sets
Conclusion
By our suggestions above, we hope that you can found cooling fan raspberry pi zero w for you.Please don’t forget to share your experience by comment in this post. Thank you!
