hometechfocus 
Nowadays, there are so many products of cone intake filter water guard in the market and you are wondering to choose a best one. You have searched for cone intake filter water guard in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cone intake filter water guard which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
CPT Universal Water Guard Short Ram Cold Air Intake Pre-Filter Air Filter Cover CPT-WG-M-B (Medium 5.50"Wx6.75"H, Blue)
- Most affordable cold air and short ram pre-filter on the market
- Pre-filter mesh works in conjunction with your filters mesh to keep out even more water and debris from getting in, while still allowing for the passage of cold air
- Prolongs the life of your engine
- Easy to install and clean
- Universal, fits most cone and cylinder shaped filters from 4.75″ to 5.25″ wide x 5.25″ to 5.75″ High
Prolong the life of your filter!
The CPT Pre-Filter adds an added layer of mesh to your filter, helping to stop even more debris and water from getting into your engine. When too much dirt builds up, you can easily slip the filter cover off, rinse it in the sink, and reinstall it without having to tighten and untighten the filter hose clamps. Works on most cone style filters (please check size).
Spectre Performance 8131DK Air Filter Wrap
The Spectre air filter wrap is specially designed to extend the service interval of your Spectre filter when used in very dusty conditions. They are made from durable polyester material containing a uniform weave. The filter wrap will stop small dirt particles with minimal restriction to the airflow of the filter.
CPT Universal Water Guard Short Ram Cold Air Intake Pre-Filter Air Filter Cover CPT-WG-L-B (Large 5.75"Wx7.25"H, Blue)
- Most affordable cold air and short ram pre-filter on the market
- Pre-filter mesh works in conjunction with your filters mesh to keep out even more water and debris from getting in, while still allowing for the passage of cold air
- Prolongs the life of your engine
- Easy to install and clean
- Universal, fits most cone and cylinder shaped filters from 5″ to 5.5″ wide x 5.75″ to 6.25″ High
Prolong the life of your filter!
The CPT Pre-Filter adds an added layer of mesh to your filter, helping to stop even more debris and water from getting into your engine. When too much dirt builds up, you can easily slip the filter cover off, rinse it in the sink, and reinstall it without having to tighten and untighten the filter hose clamps. Works on most cone style filters (please check size).
CPT Check Point Tuning CPT-WG-M-BLK Water Guard Cold Air Intake Pre Filter Cone Filter Cover for Medium Black
- Fits: 07-13 Chevrolet Avalanche, 02-06 Chevrolet Avalanche 1500, 02-06 Chevrolet Avalanche 2500, 88-05 Chevrolet Blazer, 93-12 Chevrolet Camaro, 94-96 Chevrolet Caprice, 99-05 Chevrolet Cavalier, 05-10 Chevrolet Cobalt, 04-09 Chevrolet Colorado, 97-09 Chevrolet Corvette, 10-14 Chevrolet Cruze, 06-09 Chevrolet HHR, 94-09 Chevrolet Impala, 08-12 Chevrolet Malibu, 00-07 Chevrolet Monte Carlo, 12-14 Chevrolet Sonic, 12-14 Chevrolet Spark,
- Most affordable cold air and short ram pre-filter on the market
- Pre-filter mesh works in conjunction with your filters mesh to keep out even more water and debris from getting in, while still allowing for the passage of cold air
- Prolongs the life of your engine
- Easy to install and clean
- Universal, fits most cone and cylinder shaped filters from 4.75″ to 5.25″ wide x 5.25″ to 5.75″ High
Prolong the life of your filter!
The CPT Pre-Filter adds an added layer of mesh to your filter, helping to stop even more debris and water from getting into your engine. When too much dirt builds up, you can easily slip the filter cover off, rinse it in the sink, and reinstall it without having to tighten and untighten the filter hose clamps. Works on most cone style filters (please check size).
Note: Please note that this does not stop large amounts of water from being ingested in your engine. If you are traversing deep puddles, or there is heavy rain, please uninstall your cold air intake system before attempting to drive.
Water Guard Cold Air Intake Pre-Filter Cone Filter Cover for Mazda Small Black CPT-WG-S-BLK
- Fits: 11-14 Mazda 2, 04-12 Mazda 3, 09-14 Mazda 3 Sport, 03-10 Mazda 6, 06-12 Mazda MX-5, 06-12 Mazda MX-5 Miata, 99-03 Mazda Protege, 05-11 Mazda RX-8,
- Most affordable cold air and short ram pre-filter on the market
- Pre-filter mesh works in conjunction with your filters mesh to keep out even more water and debris from getting in, while still allowing for the passage of cold air
- Prolongs the life of your engine
- Easy to install and clean
- Universal, fits most cone and cylinder shaped filters from 4.5″ to 5″ Wide x 5″ to 5.5″ High
Prolong the life of your filter!
The CPT Pre-Filter adds an added layer of mesh to your filter, helping to stop even more debris and water from getting into your engine. When too much dirt builds up, you can easily slip the filter cover off, rinse it in the sink, and reinstall it without having to tighten and untighten the filter hose clamps. Works on most cone style filters (please check size).
Note: Please note that this does not stop large amounts of water from being ingested in your engine. If you are traversing deep puddles, or there is heavy rain, please uninstall your cold air intake system before attempting to drive.
FILTERWEARS F153K Universal Water Repellent Cold Air Intake Pre-Filter – Medium
- Reduces overall maintenance cost, Extends filter service intervals, Adds convenience, Extends the life of any filter exposed or not
- Keeps your high performance filter free of debris/dirt and water, Effective barrier for any particle bigger than .005 inches
- No reduction of functionality in freezing temperatures, Hydrophobic fabric is standard (water repellent), Handle heat up to 450 degrees Fahrenheit
- Made from 100% monofilament polyester, with straps at the base of pre-filter for ease of installation
- Size: 5.5″T, 5.5″B, 6.75″H
Direct from manufacturer. Made in the USA.
Filter material: 100% monofilament polyester with water repellent finish standard on all prefilters.
With straps(for easy installation),Black, closed top.
Pre-Filter Measurements: 5.5″T, 5.5″B, 6.75″H
Air Filter Size Fitment: 4.75″ to 5.25″D, 5.25″ to 5.75″H
AEM 1-4007 Dry Flow Air Filter Wrap
AEM Dryflow Pre-Filters are manufactured from a durable micro-screen material and pretreated with a proprietary hydrophobic process designed to prevent splashes of water or mud from saturating your Dryflow air filter. AEM Dryflow Pre-filters also stop small dirt particles; yet add little restriction.
FILTERWEARS F154K Universal Water Repellent Cold Air Intake Pre-Filter – Large
- Reduces overall maintenance cost, Extends filter service intervals, Adds convenience, Extends the life of any filter exposed or not
- Keeps your high performance filter free of debris/dirt and water, Effective barrier for any particle bigger than .005 inches
- No reduction of functionality in freezing temperatures, Hydrophobic fabric is standard (water repellent), Handle heat up to 450 degrees Fahrenheit
- Made from 100% monofilament polyester, with straps at the base of pre-filter for ease of installation
- Size: 5.75″T, 5.75″B, 7.25″H
Direct from manufacturer. Made in the USA.
Filter material: 100% monofilament polyester with water repellent finish standard on all prefilters.
With straps(for easy installation), Black, closed top.
Pre-Filter Measurements: 5.75″T, 5.75″B, 7.25″H
Air Filter Size Fitment: 5″ to 5.5″D, 5.75″ to 6.25″H
CPT Check Point Tuning CPT-WG-M-BLK Water Guard Cold Air Intake Pre Filter Cone Filter Cover Mustang Medium Black
- Fits: 86-14 Ford Mustang, 95-09 Ford Ranger,
- Most affordable cold air and short ram pre-filter on the market
- Pre-filter mesh works in conjunction with your filters mesh to keep out even more water and debris from getting in, while still allowing for the passage of cold air
- Prolongs the life of your engine
- Easy to install and clean
- Universal, fits most cone and cylinder shaped filters from 4.75″ to 5.25″ wide x 5.25″ to 5.75″ High
Prolong the life of your filter!
The CPT Pre-Filter adds an added layer of mesh to your filter, helping to stop even more debris and water from getting into your engine. When too much dirt builds up, you can easily slip the filter cover off, rinse it in the sink, and reinstall it without having to tighten and untighten the filter hose clamps. Works on most cone style filters (please check size).
Note: Please note that this does not stop large amounts of water from being ingested in your engine. If you are traversing deep puddles, or there is heavy rain, please uninstall your cold air intake system before attempting to drive.
Upgr8 U8701-3005 Hd PRO OEM Replacement High Performance Dry Drop-in Panel Air Filter Red
- UPGR8 engine air filter is designed to fit perfectly in your stock airbox
- Made of high density acrylic fiber, black rubber and double black reinforced stainless steel mesh
- It is engineered to maximize air flow performance
- Allows more air to flow easily to the engine, it will increase more horsepower and torque
- This panel air filter is long life type filter and it is reuseable
Conclusion
By our suggestions above, we hope that you can found cone intake filter water guard for you.Please don’t forget to share your experience by comment in this post. Thank you!
