The Best Brasscraft Push Connect Valve

This genuine BrassCraft angle stop valve has 1/2-inch nominal (5/8″ OD) inlet x 3/8-inch OD outlet and is chrome-plated lead free brass. For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous temperatures above 115-degree F. Each pack includes 4 valves.

Pushlock Valves are easily installed and yet easy to disconnect and reuse. It features easy, Quick push-fit connection of nominal hard copper tube size (CTS), CPVC, or PEX with single lever heavy duty rust resistant handle with vinyl grip. This valves are certified for potable water and hydronic applications. When using these valves there is no need to buy expensive tools, torches, solder, flux or glue and primer. These valves can easily be removed by using a demount clip or disconnect tong. Approved for use underground and behind walls without the need of access panels. Made with Lead Free DZR Forged Brass. They are ideal for service and repair – even on wet lines. Pre-Lubricated for quick installation and No Tools, No Heat, No Glue, No Flux and No Solder Required, EPDM O-Ring for leak free seals.

Pushlock 1/2 inch Push x 3/8 inch Compression end valve (push fit 1/4 turn angle stop) are easily installed and yet easy to disconnect and reuse. The angle valve is most often used where the water pipe enters the room from the floor. It features easy, Quick push-fit connection of nominal hard copper tube size (CTS), CPVC, or PEX with single lever heavy duty rust resistant handle with vinyl grip. This valves are certified for potable water and hydronic applications. When using these valves there is no need to buy expensive tools, torches, solder, flux or glue and primer. These valves can easily be removed by using a demount clip or disconnect tong. Approved for use underground and behind walls without the need of access panels. Made with Lead Free DZR Forged Brass. They are ideal for service and repair – even on wet lines. Pre-Lubricated for quick installation and No Tools, No Heat, No Glue, No Flux and No Solder Required, EPDM O-Ring for leak free seals.

SPECIFICATIONS & APPROVALS:

• Certified to 200 PSI WOG and 200°F
• Certified by UPC / IAPMO, to meet Lead-Free Potable Water Laws
• ANSI/NSF-14/G Compliant & AWWA C800 Compliant
• Meets ASME B1.20.1, ASSE 1061
• Manufactured in an ISO Accredited Facility

BrassCraft’s Sure2Connect 1/4-Turn Straight Valve features a push connect inlet with a new patented verification technology. The Sure2Connect valve is compatible with copper, CPVC and PEX and easy-to-install. It requires no special tools, no measuring, marking, soldering or gluing to create a watertight seal. Simply PUSH the valve onto the tube. LOCK the verification clip into place. Once you hear the click”, your installation is DONE. It’s the connection you can see, hear and feel when the valve is properly installed. Manufactured from advanced engineered polymer, the Sure2Connect valve is corrosion resistant to harsh chemicals and harsh water conditions. This product also features 1/4 operation which means with a 90° turn of the valve handle, you are able to stop or start the flow of water. This valve has a straight body and is most often used in installations where the water pipe enters the room from the floor. 100% leak tested. 1/2 in. nominal push connect inlet x 3/8 in. O.D. compression outlet Compatible with PEX, copper and CPVC Patented verification clip instantly confirms connection is secure Pre-inserted tube stiffener is “installation ready” for a faster connection Valve body is rotation resistant once installed; will not rotate during on/off operation Aggressively tested to withstand harsh chemicals and water conditions Requires no special tools, no soldering or glue for a watertight seal Constructed of advanced engineered polymer Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle Attractive chrome and white finish Temperature rating: 40° to 140°F No-lead certified IAPMO and CSA listed to ASME A112.18.1/CSA B125.1 and ASSE 1061

Product Description

BrassCraft Manufacturing is a leading manufacturer of high-quality plumbing products for new construction, and repair and remodel markets. For over 65 years, the company has delivered innovative plumbing products designed to not only meet, but exceed, the needs of the plumbing industry. BrassCraft Manufacturing is meeting the new no-lead law head on with a comprehensive range of compliant products including brass stops, braided water connectors, brass fittings, and hot water heater connectors.

From the Manufacturer

BrassCraft Manufacturing is a leading manufacturer of high-quality plumbing products for new construction, and repair and remodel markets. For over 65 years, the company has delivered innovative plumbing products designed to not only meet, but exceed, the needs of the plumbing industry. BrassCraft Manufacturing is meeting the new no-lead law head on with a comprehensive range of compliant products including brass stops, braided water connectors, brass fittings, and hot water heater connectors.

Brass Craft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Angle Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the floor.

Brass Craft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90 Degree turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

BrassCraft’s push connect one-piece water supply combines their trusted brass water valve with their flexible braided polymer connector for one quick easy-to-install solution. BrassCraft’s one-piece connection features push connect technology on the valve inlet and a hand-tighten wing nut on the outlet to provide a significant savings in installation time and cost. Push connect valve inlet requires no special tools to install and comes equipped with a pre-inserted tube stiffener to make the product ideal for copper, PEX and CPVC piping systems. The braided polymer fibers of the connector are designed to bend freely without kinking or crimping in tight quarters and resist corrosion caused by chemicals found in common household, tile and glass cleaners. In addition, its reinforced inner hose resists corrosion under harsh water conditions. 1-piece unit combines valve and supply line Saves time with one less connection No special installation tools required Installation ready with pre-inserted tube stiffener Fast, reliable and secure Compatible with copper, PEX and CPVC Remove with combination removal tool or 5/8 in. open end wrench Connector bends freely without kinking or crimping in tight quarters No-lead certified IAPMO and CSA listed to ASME A112.18.1/CSA B125.1 California residents see Prop 65 WARNINGS

Pushlock Valves are easily installed and yet easy to disconnect and reuse. It features easy, Quick push-fit connection of nominal hard copper tube size (CTS), CPVC, or PEX with single lever heavy duty rust resistant handle with vinyl grip. This valves are certified for potable water and hydronic applications. When using these valves there is no need to buy expensive tools, torches, solder, flux or glue and primer. These valves can easily be removed by using a demount clip or disconnect tong. Approved for use underground and behind walls without the need of access panels. Made with Lead Free DZR Forged Brass. They are ideal for service and repair – even on wet lines. Pre-Lubricated for quick installation and No Tools, No Heat, No Glue, No Flux and No Solder Required, EPDM O-Ring for leak free seals.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Brasscraft Push Connect Valve, eg:

• What are Top 10 Brasscraft Push Connect Valve for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Brasscraft Push Connect Valve to buy?
• What are Top Rated Brasscraft Push Connect Valve to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Brasscraft Push Connect Valve?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Brasscraft Push Connect Valve.
• Before deciding to buy any Brasscraft Push Connect Valve, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Brasscraft Push Connect Valve and What you should consider when buying the Brasscraft Push Connect Valve and Where to Buy or Purchase the Brasscraft Push Connect Valve. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Brasscraft Push Connect Valve of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Brasscraft Push Connect Valve.