The Best Dewalt Planer Stand Plans

The DEWALT DWS779 12″ Sliding compound Miter saw features a powerful 15 amp, 3, 800 RPM motor that delivers extended power and durability. It has a super efficient dust collection system that captures over 75% of dust generated. This miter saw also offers an exclusive back fence design which cuts up to 2×16 dimensional lumber at 90° and 2×12 at 45°.

Product Description

13″, heavy duty, portable 2 speed thickness planer.

Amazon.com

The DEWALT DW735 features a three-knife cutterhead and a powerful 15 amp motor that delivers 10,000 rpm. It offers quick, accurate depth adjustment and the convenience of knives that are both reversible and disposable. This fully featured portable planer makes it easy to create clean custom stock.

Powerful 15 Amp Motor for Clean Cuts
Benchtop planers are a long-term investment that allow you to save money over time by buying rough stock and dimensioning it yourself. They also make creating custom materials easier, which, in turn, makes getting great results easier.

The DW735 13-Inch Planer’s powerful 15 amp motor can handle deep cuts in tough hardwoods. Its three-knife cutterhead and two-speed gearbox deliver 96 or 179 cuts per inch (cpi). Use 96 cpi when dimensioning material and 179 cpi for a finer finish.

Reversible, Disposable Knives for Convenience
The DEWALT DW734 uses razor sharp knives that are reversible and disposable. These knives last 30 percent longer than traditional disposable knives, helping you avoid costly and time-consuming resharpening.

For fast, easy, one-tool knife changes, a set of pins machined on the cutter-head goes through holes machined on the knife. This helps you quickly locate the fresh knife and refasten the knife clamp.

Large Capacity and Easy, Accurate Depth Adjustment
This planer’s extra-long infeed and outfeed tables provide 33-1/2 inches of material support. A turret depth stop saves you time when setting the machine at commonly used depths.

In addition, the planer’s material-removal gauge and extra-large thickness scale help ensure every pass is accurate. A four-column carriage lock drastically reduces the movement that causes material damage, or snipe, when planning near the end of a board.

This sturdy planer weighs 80 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 12-1/2 inches.

Fan-Assisted Chip Ejection for Dust Management
The DW735 features a Fan-Assisted Chip Ejection System with a motorized fan that breaks down debris as it leaves the cutterhead and blows it into one of the two dust shrouds (included). One shroud disperses the chips down onto the shop floor while the other provides a connection for a vacuum hose or dust-collector hose.

This sturdy planer weighs 92 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 13 inches.

The DW735 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What’s in the Box
DW735 DEWALT 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead, dust-hose adapter, and dust-ejection chute.

See all Product description

Maximized for accuracy and capacity this DEWALT DWE7485 8-1/4 in. table saw includes on-board storage for blade guard assembly, non-through cut riving knife, anti-kickback pawls, blade change wrenches, miter gauge and push stick. The powerful DEWALT 15 amp, 5800 RPM motor allows users to complete a majority of applications. The rack & pinion fence allow for fast, easy adjustments and provides the capacity to rip 4×8 sheet goods.

Product Description

This item is DEWALT DW734 15 Amp 12-1/2-Inch Benchtop Planer . Used for Woodworking, Planers-Benchtop. The produt is manufactured in Taiwan.

Amazon.com

The DEWALT DW734 12-1/2-Inch Thickness Planer features a three-knife cutterhead and a powerful, 15 amp motor that delivers 10,000 rpm. Also offering quick, accurate depth adjustment, extra-long feed tables for material support, and the convenience of knives that are reversible and disposable, this planer makes it easy to create clean, custom stock.

12-1/2-Inch Thickness Planer with Three Knife Cutterhead At a Glance: Powerful 15 amp motor Three-knife cutterhead operates at 10,000 rpm 96 cuts per inch for a fine finish Disposable, reversible steel knives are easy to change 1/8-inch maximum cut depth; 6-inch depth capacity; 12-1/2-inch width capacity Three-year limited warranty, one-year free service, 90-day money-back guarantee

Create custom stock with the thickness planer’s 10,000 rpm three-knife cutterhead. View larger.

Versatile planer cuts a wide range of hardwoods. View larger.

Powerful 15 Amp Motor for Deep, Clean Cuts
Benchtop planers are a long-term investment that allow you to buy rough stock and dimension it yourself. They also make creating custom materials easier, which, makes getting great results easier.

This planer’s powerful 15 amp motor handles a wide range of tough hardwoods, and its three-knife cutterhead spins at 10,000 RPM to provide 96 cuts per inch.

Reversible, Disposable Knives for Convenience
The DEWALT DW734 uses razor sharp knives that are reversible and disposable. These knives last 30 percent longer than traditional disposable knives, helping you avoid costly and time-consuming resharpening.

For fast, easy, one-tool knife changes, a set of pins machined on the cutter-head goes through holes machined on the knife. This helps you quickly locate the fresh knife and refasten the knife clamp.

Effective Dust and Debris Management
The DW734 planer includes a dust hood that attaches to a shop vacuum or standing dust collector (sold separately) for efficient collection of chips and debris.

Large Capacity and Easy, Accurate Depth Adjustment
This planer’s extra-long infeed and outfeed tables provide 33-1/2 inches of material support. A turret depth stop saves you time when setting the machine at commonly used depths.

In addition, the planer’s material-removal gauge and extra-large thickness scale help ensure every pass is accurate. A four-column carriage lock drastically reduces the movement that causes material damage, or snipe, when planning near the end of a board.

This sturdy planer weighs 80 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 12-1/2 inches.

This DW734 12-1/2-Inch Thickness Planer with Three Knife Cutterhead comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What’s in the Box
DW734 DEWALT 12-1/2-Inch Thickness Planer with Three-Knife Cutterhead and dust hood.

The DEWALT DW734 features extra-long feed tables for material support.

The DEWALT DCP580B 20V MAX* Brushless Planer features a brushless motor which provides power and runtime of 32,000 cuts per minute and can achieve a fast removal rate with 5/64″ (2 mm approximately) maximum depth of cut. This tool offers a calibrated depth adjustment knob to 5/64″ (2 mm approximately). The precision-machined front and back aluminum shoes ensure parallelism of cut and the kickstand allows user to rest the planer on work surface without gouging the material. A precision machined groove in the front shoe allows for edge chamfering. A Poly-V drive belt provides increased belt durability and an ergonomically designed handle provides greater comfort and less user fatigue. Includes: Planer, Users Guide, Guide Fence, Wrench.

DW745 Type 1, DW745 Type 2, DW745 Type 3

Product Description

The Rockwell RK9034 Jaw Stand XP is a versatile, portable work stand designed to save you time and hassle. The XP stands for exact positioning when fine tuning the perfect level or clamping for more security. The tripod set up allows for a level and more sturdy work area. The non-marring feet protect your work and prevent damage to both your project and floor. The RK9034 improves the concept of the traditional roller stand, and adds extra features to create a work support stand. The low-friction slides on the top of the stand allow work to pass over it in a straight path. The head bevels a full 90-Degrees. Built into the tilting head is a work clamp, capable of holding material up to 1-3/4-Inches wide. The Jaw stand is perfect for holding a door in place for hanging, or using a 2 by 4 brace to support crown molding while hanging it. The Jaw Stand XP acts as a second set of hands, and never needs to take a break

Amazon.com

The JawStand XP serves as a second pair of hands for DIY and professional projects alike (view larger).

Hold, support, clamp, or lift materials with ease (view larger).

Rockwell’s RK9034 JawStand XP serves as a portable work support system with exact positioning—acting as a second pair of hands for common one-person projects like hanging a door, installing crown molding, supporting cabinetry, and more. From DIYers to professionals alike, the JawStand XP improves upon the performance of traditional roller stands to help you get the job done cleanly and efficiently.

The JawStand XP’s compact, low-profile design—complete with an extra-wide folding tripod leg stand and column height adjustment capabilities (from 29 to 43 inches)—make it easy to stow away in your workshop, garage, or on the job site without taking up important storage space. But that doesn’t mean it compromises on maximum load capacity: Even though the JawStand XP only weights 13.5 pounds, it can hold up to 220 pounds.

Material Support

The XP stands for exact positioning, and the RK9034’s low-friction slides are ideal for infeed and outfeed material support for power tools like saws and planers. While ordinary stands have rollers that tend to misdirect the material, such as a piece of lumber, the JawStand XP’s slides smoothly direct it along your intended path.

Assembly and Mounting

Heavy items like cabinetry are easily supported for assembly or mounting with help from the JawStand XP. With a head that rotates 90 degrees and an adjustable bevel with scale, you can manage exact positioning even under load. Micro-height adjustment raises and lowers work up to 2 inches for accurate placement.

Clamping

Its swiveling and tilting head with integrated clamp assists make the JawStand XP handy for innumerable assembly and construction applications. Able to securely hold items up to 1-3/4 inches wide, the cam-action clamp quickly sets and releases to allow you to clamp materials of the same size without needing to adjust the clamp width every time.

What’s in the Box

One Rockwell RK9034 JawStand XP work support stand.

Highlights

• Provides portable work support with precise positioning
• Ideal for supporting cabinets, molding, doors, and similar materials for installation
• Integrated clamp firmly holds materials up to 1-3/4 inches wide
• Has no-mar, no-slip feet that do not damage surfaces
• Backed by a five-year limited warranty

The JawStand XP also serves as a sturdy yet portable device for material support (view larger).

See all Product description

Introducing the 13” DeWalt Planer Blades (6 Knives) by POWERTEC.

These 13 in. heat treated double sided replacement planer knives are made to exceed the OEM product.  The innovative manufacturing process begins with the usage of M2 Laminated Tool Steel. It’s high grade construction provides it with a hardness that is temperature resistant, while offering high wear resistance and anti-corrosive properties.  Strict professional machining and quality control ensure superior sharpness, long lasting durability and precision cutting.

Double Sided to Last Twice As Long

Our planer knives feature a dual-sided double edge blade designed to provide you with sustained planing on each side, before turning them over to the other side.  Ultimately, this will help save you both time and money while delivering professional looking results for your woodworking projects.

Package: POWERTEC Reusable / Storage Case Packaging 

Product Compatibility

These replacement blades were made exclusively for the DeWalt DW735 and DW735X 13-Inch, Two Speed Planers.

POWERTEC is a leading manufacturer of high quality wood work accessories, sanding discs and an assortment of OEM replacement parts. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product development to the industry.

The Bosch RA1181 benchtop router table provides a large work surface for woodworking and routing. Designed to fit a variety of routers, this router table is a versatile piece of equipment that will serve as an indispensable part of any woodworking shop. Its 2-1/2 inch dust collection port offers better dust collection for a cleaner work environment. The large aluminum top makes the table both durable and portable. This benchtop router table includes mounting hardware, features a tall aluminum fence with adjustable MDF face plates, two outfeed shims, and an aluminum router mounting plate. The starter pin and guard for router curved workpieces is also included, in addition to the built-in cord wrap for convenient storage and portability.

Remember when you brought those old jagged boards back to life. The WEN 13 in. 3-Blade Benchtop Thickness Planer repurposes rough and worn wood to give it an exceptionally smooth finish. The powerful 15 Amp motor provides over 25,500 cuts per minute at a 26 ft. per minute feed rate. Plane boards up to 13 in. W and 6 in. T with ease. The onboard planning gage helps inform users about the amount of material being removed during each pass. Combine that with the heavy-duty cast iron base for a sturdy planer that does not walk or wobble during operation. The handy depth adjustment knob varies each pass to take off anywhere from 0 in. to 3/32 in. of an inch. The fan-assisted dust port removes chips and sawdust from the workpiece and blasts them out of the way. This package also includes height-adjustable infeed and outfeed tables to limit snipe while providing extra support to your workpiece during planning. Easily mount the planer to a work surface or stand using the predrilled base holes. Repurpose old wood or make a set of boards flush with the WEN 13 in. 3-Blade Benchtop Thickness Planer. And because its a WEN product, this planer comes backed by a nationwide network of skilled service technicians, a helpful customer support line and a two-year warranty. Remember when your planer could handle even the hardest of woods. Remember WEN.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Dewalt Planer Stand Plans, eg:

• What are Top 10 Dewalt Planer Stand Plans for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Dewalt Planer Stand Plans to buy?
• What are Top Rated Dewalt Planer Stand Plans to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Dewalt Planer Stand Plans?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Dewalt Planer Stand Plans.
• Before deciding to buy any Dewalt Planer Stand Plans, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Dewalt Planer Stand Plans and What you should consider when buying the Dewalt Planer Stand Plans and Where to Buy or Purchase the Dewalt Planer Stand Plans. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Dewalt Planer Stand Plans of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Dewalt Planer Stand Plans.