hometechfocus 
Nowadays, there are so many products of 4 tap keg refrigerator in the market and you are wondering to choose a best one. You have searched for 4 tap keg refrigerator in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 4 tap keg refrigerator which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
3 Faucet Refrigerator Keg Kit Commerical Tap, Taprite Regulator, by Kegconnection
- 3- 4 1/8″ Metal Shanks with Chrome Faucets and Faucet handles.
- Double Gauge Regulator, Made in the USA by TAPRITE (BONUS: Kegconnection adds an Additional ONE year warranty to Taprite regulators.)
- 3 Way Air Distributor with independent check valved shutoffs.
- 3 American “D” Keg Couplers with a Deluxe Faucet Wrench
- Shipping rate is for the Continental US ONLY
Kegconnection offers this Refrigerator Conversion Kit, 3 taps for three Sanke tap kegs(Standard Commercial Beer Tap). Fully Assembled! Made in the USA Regulator(BONUS: Kegconnection adds an Additional ONE year warranty to Taprite regulators.)p is attached to an air manifold with Check Valves.(This is important because it keeps beer from flowing between kegs, this is an issue with kits built with TEE system) The manifold system will allow you to install and run your gas inside or outside of your fridge. When installing outside you will only need to drill one hole! This kit is designed to give you everything you need to dispense commercial beer from a Sanke tap (95% of beers on the market use this tap) except for the refrigerator. Very simple to set up, the hoses and pieces are already assembled!!! The Kit Includes: 2 gauge CO2 American made Taprite Regulator with 3 way air manifold, 3 American “D” Beer Taps,3-4 1/8″ standard Shanks for Refrigerator with line attached, 3-standard chrome metal faucets that screw directly into Shanks, faucet handles and stainless oetiker clamps. Also includes a Deluxe faucet wrench. Our kits come fully assembled! Shipping rate is for the Continental US ONLY
Kegco Premium Door Mount Kegerator Keg Tap Conversion Kit with No Tank
- 100% STAINLESS STEEL CONTACT: All the metal components that your beer will come in contact with are high quality stainless steel from the keg to your glass. This ensures higher levels of sanitation as stainless steel will not pit or harbor bacteria like brass. Along with the food grade thermoplastic vinyl beer lines, these components ensure that your beer does not pick up any off flavors and tastes the way the brewery intended.
- PERLICK PERL FAUCET: This Perlick beer faucet features a revolutionary ball and floating front seal design that prevents beer from being exposed to air, keeping your handle lever from sticking and mold or bacteria from building up in the faucet body. The heavy-duty 304 stainless steel construction will not pint, tarnish, or taint the flavor of your beer, and it’s polished interior ensures a smoother flow with less agitation and foaming. It is even suitable for wine, kombucha, and coffee!
- DUAL GAUGE REGULATOR: Durably constructed to deliver a consistent flow pour after pour, this Kegco 762 Commercial Grade Double Gauge Regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body.
- DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our 6″ x 4″ door mount drip tray’s clean design, durable stainless steel construction, and attractive brushed finish have made it a favorite of beer lovers. Hassle-free from start to finish, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, and when you’re done dispensing for the day, a removable grill makes clean-up a breeze. This drip tray does not have a drain, so it will need to be emptied manually.
- INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow instructions and all of the high-quality draft dispense components you’ll need to quickly and easily convert your refrigerator into a high-performance draft beer dispenser.
With Kegco’s Premium Door Mount Kegerator Conversion Kit, you can easily convert your refrigerator into a draft beer dispenser with all stainless steel contact, so your beer will only touch sanitary stainless steel from keg to glass! Thanks to the high quality stainless steel Perlick faucet, stainless steel shank, stainless steel coupler probe, and stainless steel fittings on the beer line, your completed kegerator will be suitable not only for dispensing delicious draft beer, but for dispensing wine, kombucha, and iced coffee as well! To ensure that your finished product is as convenient as possible, Kegco has included other premium features like a commercial grade dual gauge regulator that allows you to monitor both the CO2 pressure in your keg and the CO2 volume left in your tank, and a stainless steel drip tray that collects drips and spills for easy clean-up.
Kegco Standard Double Faucet Tower Kegerator Conversion Kit No Tank – STCK2-542-2_NT
- PRO SERIES DUAL GAUGE REGULATOR: This Kegco 542-2 Pro Series Two Product Dual Gauge Regulator has a y-splitter and two independent shut-off valves that let you dispense two kegs at the same pressure! It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi.
- LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L “D” System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- DUAL FAUCET DRAFT BEER TOWER: This 3″ diameter air-cooled chrome-plated metal draft beer tower comes complete with two NSF-approved chrome-plated metal faucets with brass levers and two black ABS plastic faucet knobs. Two 5′ lengths of 3/16″ I.D. beer line extend from the bottom of the tower. These thermoplastic vinyl beer hoses remain flexible and durable at recommended temperatures and pressures, are unaffected by normal cleaning compounds, and will not rot, swell, or dry out.
- STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length.
- INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow directions and all of the high-quality draft dispense components you’ll need to quickly and easily convert your refrigerator into a high-performance draft beer dispenser.
This Kegco Standard Double Faucet Tower Conversion kit is the perfect solution for those who are converting a compact refrigerator or converting a freezer into a kegerator. This kit comes with brand new, high quality draft beer components and contains everything you will need to successfully convert your compact refrigerator/freezer into a kegerator at great savings. Please Note: Beverage Factory is the only Authorized Reseller of Kegco products. Products purchased outside of Beverage Factory are not genuine Kegco parts and will not be covered under Kegco’s 1-year warranty.
Onebom Beer Draft Faucet with 3“ Shank Kit & Tap Brush, Connect 3/16“ ID Tubing, Chrome Plated No Leaks for Fridge,Keg (3” Shank)
- ★WORKS PERFECT & LOOKS GREAT – Perfect seal when tapping a keg. This chrome faucet has inner stainless steel inserted to make sure it`s Rustproof & Corrosion resistance.You don`t need to worry about your health.
- ★PLASTIC FAUCET KNOB- This knob is a twist on and can be interchangeable with personal knobs! Works with all standard (3/8″ 16) tap handles
- ★1/4″ HOSE BARB – Use a 3/16″ ID tubing and heat it up with a hair dryer or a heat gun and you’ll get a great, leak free connection. The shank is the perfect length for a standard fridge door.
- ★FAUCET SPOUT PLUG – A spout plug is an economical solution for controlling, fruit flies yeast and bacteria buildup when the faucet is not in use. Besides,it makes easily to clean the tap with this little smart item.
- ★90 DAY GUARANTEE – Click the “Add to Cart” Button and Buy with No Regrets. Just turn them back if You Got Any Problem but don`t want to contact us.Pls email us if anything should happen within 90 Days, we’ll replace them free of charge.
Are you upset of leaking or sticking faucet for your fresh homebrew draft beer?
Are you still looking for a faucet that is pour perfect with you kegerator or fridge or keezer?
OneBom BEER DRAFT FAUCET with Nipple Shank can proudly meet your requirements! It features a forged brass body with a highly polished chrome finish. These faucets have brass shaft assemblies and levers with Teflon ball washers which ensure smooth operation.
Features:
– Easy to install, quick connection and convenient access
– Suitable for bars, hotels, restaurants, home drinking, etc
– Brass (valve body, connecting pipe), stainless steel (piston, nozzle), Chrome plated
Package Includes
1 x Shank
1x Beer Faucet with Knob
1 x Faucet Plug Brush
Warm Tips:
Be sure to have a faucet tap wrench to connect the shank to the faucet in case it`s leakage.
Bev Rite Beer Faucet and 4-Inch Shank Kit with Black Handle (2 Pack)
Standard Beer faucet with 4-1/8 inch shank and black plastic knob. Faucet and shank made of chrome plated brass
Kegco SH316NA-518-ASC Long Shank with Nipple Assembly 3/16" I.D. Bore, 5 1/8", Stainless Steel
- Used to Attach Beer Line to a Faucet Through Wall, Refrigerator Door, Cabinet, etc
- 9-1/8″ Long Stainless Steel Beer Shank with Nipple Assembly
- 3/16″ I.D. Beer Line Connection
- Stainless Steel Construction for durability and sanitation is ideal for cider and wine also
- Home brew Kits and accessories
This stainless steel shank is 5-1/8″ long measured from the end of the threading to the end where the faucet attaches. The shank comes with a black plastic flange on the front and a compression ring on the back. Forged brass lock nut. 3/16″ ID beer line connection.
RanBB Draft Beer Keg Tap, Heavy Duty Beer Keg Tap Picnic Pump Lever Coupler D System 4" Party Pump Chrome Pump
- ✹System “D” (American Sankey)
- ✹Pump Type 4″ Chrome Plated Metal Pump
- Lever Coupler
- ✹Short stroke pump for quick pumping
- ✹Lever handle for easy keg tapping
- ✹When you have a party and want professional beer pours, these pumps are a must! Used for most domestic beer choices. Keeps beer fresh but a CO2 system should be used if beer will be used longer than a day or two.
All the products are shipped from US warehouse(CA or NJ)!
All the products are shipped from US warehouse(CA or NJ)!
All the products are shipped from US warehouse(CA or NJ)!
RanBB Draft Beer Keg Tap, Heavy Duty Beer Keg Tap Picnic Pump Lever Coupler D System 4″ Party Pump Chrome Pump
Description:
-System “D” (American Sankey)
-Pump Type 4″ Chrome Plated Metal Pump
-Lever Coupler
-Short stroke pump for quick pumping
-Lever handle for easy keg tapping
-When you have a party and want professional beer pours, these pumps are a must! Used for most domestic beer choices. Keeps beer fresh but a CO2 system should be used if beer will be used longer than a day or two.
Kegco KC KTP-4D1 Keg Beer Pump D System, 4", Chrome
This is our most popular keg beer tap. It features a forged brass base and chrome plated Air pump. This pump is ruggedly built for performance and durability. The base is rendered in tin-nickel plate.
FERRODAY 4-1/8 inch Shank Stainless Steel Core Beer Faucet Draft Beer Faucet Chrome Plated Beer Tap No-Rust No-Leak Beer Faucet for Homebrew 1/4 Barbed Fitting
- 【Material & Construction】: Stainless steel 304 core, forged brass body and premium 5-layer chrome polished, shinny polished faucet, a pretty decoration in your kitchen! Durable and corrosion resistant, will not taint the flavor of your beers.
- 【4-1/8 Shank Easy to Install】: Built-in 3/16” barbed fitting and 4-1/8” Shank is widely used to attach a beer or wine line through a wall, refrigerator or cabinet.
- 【No Leak & No Stick 100/100】: We have adopted food grade rubber seals to eliminate your worries about leakage. Easy to assembly and take apart for cleaning! Regularly cleaning is not only a necessary step to prevent sticky problem, but also a key to maintain the taste of your beers!
- 【Smooth Flow & Less Foaming】Simple construction, LESS agitation, Smooth flow and LESS foaming, FERRODAY professional draft beer faucet helps!
- 【Life Time Service】We are committed to offer you high quality product as well as superior service! Please feel free to tell us if any problems, we would try our best to satisfy you. Lifetime technical support.
Kegco KC SHANK4-ASC Shank with Nipple Assembly, 4", Stainless
This stainless steel shank is 3 1/2″ Long measured from the end of the Threading to the end where the faucet attaches. The stainless steel shank comes with a black plastic flange on the front and a compression ring on the back. Forged brass lock nut. 3/16″ Id beer line connection.
Conclusion
By our suggestions above, we hope that you can found 4 tap keg refrigerator for you.Please don’t forget to share your experience by comment in this post. Thank you!
