hometechfocus 
Nowadays, there are so many products of flexible aluminum heating cables in the market and you are wondering to choose a best one. You have searched for flexible aluminum heating cables in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings flexible aluminum heating cables which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
HEATIT HISD 9-feet Pipe Heating Cable with Built-in Thermostat
- Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality warranty. If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues.
- Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
- Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
- Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight.
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
Why can HISD pipe heating cable give you a safe, healthy energy saving and durable water pipe?
The plug of HISD owned the indication light to show you whether there is electricity or not. With the build in thermostat, you can save more energy.
HISD pipe heating cable was approved by both CSA and ETL. You can have more confidence on the product safety. Pre-assemble pipe heating cable make installation easy for do-it-yourselfers.
HISD owned the aluminum foil and the tinned copper braid to make sure the 100% screen rate to make the product more healthy and more stable.
In the connection, HISD take the industrial grade heat shrinkage tube technology to make the cable more durable.
How about the manufacturer?
The factory meet ISO9001 standard (audit by BV)in the production process and the company take a very strict requirement on the incoming material, production process control, finish good inspection etc. Advanced product structure engineering design, good raw material, strict production process, strict internal management plus many years maneuvering experience make HISD more reliable.
Application tips
The HISD is pre-assemble and easy to install, protect the pipe diameters up to 1.5″ from freezing. You can choose different lengths based on the chart in the instruction.
Warning
Never allow heating cable to touch, cross or overlap itself at any points. No crossing. No spiraling. Never install heating cable on plastic pipe unless pipe is filled with water all the times.
Do not install the same cable on more than one pipe.
While it is coiled, never plug in the heating cable.
Never alter this heating cable in any way.
The thermostat and the entire heating cable has to be in contact with the pipe.
Combustible material must not be within 1/2 in. of completed installation.
Never use metal binding to secure heating cable to pipe.
HA-30-2 Flexible Aluminum Door Heating Braided Cables
- MODEL
- AH-30-2. FOR 240V APPLICATIONS AND 210 WATTS
- HEATING OUTPUT OF 7 WATTS PER LINEAR FOOT. (30′ long cable)
- NO THERMOSTAT OR PLUG ARE REQUIRED.
- USED AS DOOR HEATERS TO ELIMINATE FROST BUILD-UP AND PREVENT MOISTURE.
- USED IN HEATING DRAIN TROUGHS AND TUBES.
The HA-30-2 door heater cables specifications include: flexible aluminum braided heater cables, 7 Watts per linear foot, easy to install (require no thermostat or plug). Eliminate frost build-up, and prevent moisture, heating drains, drain tubes, and drain pans.
USB 3.0 Micro Cable 2 Pack / 3.3FT+6.6FT Fast Charging for S5 Note3, AINOPE Nylon Braided Seagate Cord, Seagate External Hard Drive Cable Compatible with Samsung Galaxy Note 3 S5 WD Hard Drive, etc
- ✅STABLE CONNECTION:The 10,000+ plug lifespan test ensures high quality and longer service life. Well-made aluminum alloy connector of this usb 3.0 cable for Samsung S5/NOTE3 and protable external hard drive is tightly fit, the situation of charging&transferring failure and hard disk not recognized will never occur.
- ✅3A FAST CHARGE&5Gbps DATA SYNC:Fully charge your Samsung S5/NOTE3 in one and a half hours with this Samsung S5 charger, guards your devices safety with 56KΩ resistors,prevent heating to protect your battery, while keep charging in quick speed at the same time.The transmission speed of this external hard drive cable is 10X faster than USB2.0,which will copy your files with 5Gbps speed and provide 3A stable output current when connected with portable external hard drive.
- ✅TRULY DURABLE:Strengthened nylon braided cable is more durable than normal OEM s5 cable, combine premium durability with beauty,featured flexible and tangling-free, have no worry about chewing by kitty.Compared with OEM Note 3 cable,the SR reinforced design can efficiently prevent broken,so as to realize the real durability.
- ✅UNIVERSAL COMPATIBILITY:This USB 3.0 cable compatible with various of brands and capacity hard drive with micro B port, compatible with external hard drive such as Toshiba Canvio, Seagate Free Agent, and Western Digital (WD) My Passport and Elements hard drive.Also compatible Samsung Galaxy S5, Note 3, Note Pro 12.2, Tab Pro 12.2, Pentax camera, USB hub and etc. It can connect the XBOX or PS4 with hard disk to expand the storage space for you to download more games.
- ✅WHAT YOU GET: We offer One year worry free service and 24-hour online after sales services.If you have any questions about our product, please feel free to contact with our reliable customer service. Package: USB 3.0 Micro B Cable*2（1m*1/2m*1）
Similar items with 4 stars and above
BNTECHGO 12 Gauge Silicone Wire Ultra Flexible 20 Feet high Temp 200 deg C 600V 12 AWG Silicone Wire 680 Strands of Tinned Copper Wire Stranded Wire Model Battery Cable Black and Red Each Color 10 ft
- High Quality Ultra Flexible Soft Silicone Rubber Copper Wire!Super Low Impedance,Highly Efficient!
- High strand count copper core,12awg silicone stranded wire has 680 strands 0.08 mm tinned copper wire,the copper strands are tinned,protecting them from corrosion and making it easier to solder.
- They are constructed with premium silicone rubber insulation.High temperature resistance 200 degree C,Low temperature resistance,in extreme cold -60 degree C.Rated Voltage:600 volts.Outside diameter 4.5 mm,tolerance +/- 0.1 mm.
- 12 gauge silicone wire kit:2 colors,red and black,each color 10 ft,total 20 feet.
- BNTECHGO silicone wire are widely used for model planes,model cars,model ships,batteries,lamps,household appliances,electric heating appliances,meters,instruments,motor lead wire and digital fields.
1.High Quality Ultra Flexible Soft Silicone Rubber Copper Wire!Super Low Impedance,Highly Efficient!
2.High strand count copper core,12awg silicone stranded wire has 680 strands 0.08 mm tinned copper wire,the copper strands are tinned,protecting them from corrosion and making it easier to solder.
3.They are constructed with premium silicone rubber insulation.High temperature resistance 200 degree C,Low temperature resistance,in extreme cold -60 degree C.Rated Voltage:600 volts.Outside diameter 4.5 mm,tolerance +/- 0.1 mm.
4.12 gauge silicone wire kit:2 colors,red and black,each color 10 ft,total 20 feet.
5.BNTECHGO silicone wire are widely used for model planes,model cars,model ships,batteries,lamps,household appliances,electric heating appliances,meters,instruments,motor lead wire and digital fields.
Also available the right gauge wire from thin 30 awg to heavy duty 6 awg silicone wire and a huge range of colors,available 11 colors,including Red,Black,Blue,Yellow,Green,White,Brown,Gray,Purple,Orange and Pink!
iPower GLDUCT4X8C 4 inch 8 feet Non-insulated Ducting Aluminum Foil Vent with 2 Clamps
iPower is the leading manufacturer of grow light systems; supplying gardeners, worldwide, for over a decade. We use the transformative power of light to make gardening more efficient and productive. In addition to HPS/MH and Ceramic MH technology, we offer digital ballasts, fluorescent, and LED lighting systems. From hobbyist to commercial applications, we offer a broad spectrum of gardening tools and equipment in hydroponics, irrigation, climate control, and structures to help your garden thrive.
iPower Ventilation Ducting is made from high quality aluminum to provide flexibility and protect against breaking during installation. Not only does the duct act as in intake and exhaust piping for active-cooled fixtures and reflectors, but also stores and dissipates heat at a steady rate, which reduces room temperature fluctuations.
Benefits of iPower Ducting:
- This 4-inch ducting fits any standard 4-inch inline fan.
- 3-layer thickness: Aluminum Foil + PET + Aluminum Foil.
- Helically shaped and internally crimped galvanized steel strip.
- Interlocking steel strips to form an air tight and leak proof system.
- Each ducting unit includes a pair of metal clamps made from stainless steel.
- This air duct is easy to cut using a pair of metal snips or a standard wire cutter.
- This ducting is easy to bend to install in hard to reach spaces such as grow rooms, attics, crawl spaces, etc.
- This ducting is made with aluminum reinforced with a spiral-wire, designed to prevent the ducting from unraveling when cut into smaller pieces.
- Typical applications for ventilation ducting include: dryer room vents, A/C or Heater ducting, grow room ventilation and other indoor gardening applications.
- 12-month manufacturer warranty.
Woods Clamp Lamp Light with Aluminum Reflector, 150W, UL Listed, 6- Foot Cord
- VERSATILE LIGHT WITH CLAMP: Suitable for use in the home, office or work studio, studio lamp for artists, photographer and also for indoor gardens it can provide consistent light and warmth
- EASY-TO-USE CLAMPING LAMP: With an 8.5” adjustable aluminum reflector for focused light, a convenient on/off button and a 6 ft long cord for you mounting the metal clamp lamp, 6′ 18/2 SPT-2 Brown Cord
- SAFETY AND INDUSTRY APPROVED LAMP WITH CLAMPS: This flexible clamp lamp is UL listed and meet applicable safety standards
- this means it’s very safe to use. 8-1/2″ Diameter
- SCRATCH-RESISTANT CLAMPS: The clamps of this small clamp lamp are covered with scratch-resistant sleeves that wouldn’t scratch your work surfaces while its adjustable ball joint gives you the flexibility to focus light where it’s needed. Aluminum Shade
- FEATURES OF CLAMP ON LAMP: 6 foot cord 18 AWG SPT-2
- rugged molded-on plug
- on/ off push button switch
- double ball universal joint
- non-marring spring clamp grips
- 150-watt bulb medium base e26 bulb (E26). Heavy Duty Clamp
Woods 0151 18/2-Gauge SPT-2 Clamp Lamp with 8.5-Inch Reflector, 150-Watt, 6-Foot Cord. On off push through switch and rugged molded-on plug.This lamp will accept up to a 150-watt Light bulb with a standard Medium Base.Find many uses around your home or office. Provides extra light in workshops, basement, or garage. Versatile multi-use utility lamps with polished and vented aluminum reflectors. Each unit features a double ball universal joint, non-marring grips and a clamp-on bracket. Industry Approvals: UL Listed. The Woods (R) brand is a registered trademark of Coleman Cable Inc.
Sealproof 1/2-Inch Flexible Non-metallic Liquid-Tight Electrical Conduit Type B, UL Listed, 1/2" Dia, 100 Feet
- Made in USA. Use with Sealproof straight or right angle connectors
- can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs
- Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments
- resists abuse, pull and crushing
- outdoor, sunlight resistant, direct burial.
- Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting
- Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction
- UL Listed Underwriter’s Laboratories File No. E-129973
- UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating – 18°C to 75°C
Heat it HIRD 20 feet Roof Gutter De-Icing Cable
- Designed to prevent ice buildup, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts. When properly installed and operated, this product creates a path for melted snow or ice (“melt water”) to drain from the roof to the ground.
- Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available
- Suitable for most roof and gutter configurations. HIRD cable cannot be used on slate, stone, metal and ceramic roofs.
- Test the cable before installation. Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately few minutes, it should feel slightly warm to the touch. Then unplug the cable.
- Both CSA and ETL approved. 6 ft 18/3 cold lead with plug
- 5 watts/ft. Pre-assembled, ready to install, no maintenance required
- Easy instruction manual, clips and spacers are included.
- Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy. Three year limited warranty- If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact us in any time.
What is the purpose of the heating cable?
The roof de-icing cable is designed to prevent ice buildup, known as ice dams, from forming on roofs and in gutters and downspouts. When properly installed and operated, this product creates a path for melted snow of ice (“melt water”) to drain from the roof to the ground.
Why you need to choose HIRD roof heating cable to protect your roof in the winter ?
HIRD roof heating cable was approved by both CSA and ETL. You can have more confidence on the product safety. Pre-assemble heating cable make installation easy for do-it-yourselfers with the included clips and spacers.
HIRD owned the aluminum foil and the tinned copper braid to make sure the 100% screen rate to make the product more healthy and more stable.
In the connection, HIRD take the industrial grade heat shrinkage tube technology to make the cable more durable.
How about the manufacturer?
The factory meet ISO9001 standard (audit by BV)in the production process and the company take a very strict requirement on the incoming material, production process control, finish good inspection etc. Advanced product structure engineering design, good raw material, strict production process, strict internal management plus many years maneuvering experience make HIRD more reliable.
This kit is only designed for use on:
Metal or plastic gutters/downspouts
Inclined roofs
Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes
Do not use this kit on any other type of roof, gutter and downspout, including: Roofs with wooden shingles, Rubber or rubber membrane roofs, Composite (tar and gravel) roofs, Wooden gutters or downspouts, Flat roofs
HIRD cable cannot be used on slate, stone, metal and ceramic roofs.
These types of roofs require special installation or the use of a self-regulating cable.
SainSmart TS80 Portable Soldering Iron with Adjustable Temperature, Auto Sleep Mode, Fast Internal Heating, OLED Display, Complete Kit(with TS-D25 Tip & 9V/2A QC3.0 Quick Charger USB Type C Cable)
- Complete Kit: The complete kit including the TS80 Iron Controller, TS-D25 Soldering Iron Tip, Type-C Cable, Power Plug Adapter, Safety Ground Wire, Allen Key, and Manual.
- Smart: The integrated STM32 processor automatically regulates the TS80’s “sleep”, “standby”, and “operating” modes, ensuring a safe operation for the user. Equipped with an OLED screen, giving feedback on the TS80’s operation status.
- More Portable: Driven by the pursuit of perfection, TS80 is a smaller and thinner soldering iron than its ancestor TS100. This unit is powered by USB Type-C interface and QC3.0 standard input. It can be powered using any mobile power supply that meets the QC3.0 (9V 2A) protocol. TS80 is ready for work anytime!
- More Durable: The body of the TS80 is made of a CNC machined aluminum alloy. This provides you with a small, but robust package designed to last!
- Excellent Temperature Control: The internal ceramic heating core and pure copper heating conductor focuses the heat to the iron’s tip, ensuring easy, reliable, and consistent operation for all jobs!
Overview
TS80 is a newly designed smart soldering iron, suitable for hobbyists, tinkerers, or electrical engineers doing the most precise repair jobs.
As an industry leader since 2010, SainSmart offers a 1-year manufacturer’s warranty on all parts, so you can rest assured that your purchase is
protected.
SPECIFICATIONS
Temperature Range: 100℃ – 400℃
Power Input: 9V/2A (QC 3.0)
Data/Power Interface: USB Type-C
Temperature stability: ±3%
Display: OLED
Length of controller: 95.5mm
Length of tip: 60+40mm
Weight: 36.5g (power adaptor not included)
Certifications: CE, FCC
WHAT’S IN THE PACKAGE?
1 x SainSmart TS80 Soldering Iron Controller
1 x TS-D25 Soldering Iron Tip
1 x Type-C Cable
1 x Power Plug Adapter
1 x Safety Ground Wire
1 x English User Manual
1 x Allen Key
Similar items with 4 stars and above
Superdream US Plug Flexible Aluminium Wire Neck with On/Off Switch For E26/E27 Socket Desk Lamp Clip Holder Black
- US 2 Pin Plug to E27. Material : Plastic, Electronic Parts, Stainless Steel
- Voltage : AC 110-220V
- Lampshade Size : 5.8 x 3.7cm/2.3″ x 1.5″(L*Max.D)
- Clip Size(Approx) : 10 x 6 x 5cm/3.9″ x 2.4″ x 2″(L*W*T)
- Total Length (Cable not Included) : 30cm/ 12″
- Cable Length : 170cm/ 67″
- Neck Length : 18cm/7.1″
- Color : Silver Tone, White
- Net Weight : 244g
- Easy to install and safe to use
- The clamp has a really nice strong amount of pressure and the gooseneck is fairly strong and supportive as well. The neck is flexible, so that you can maneuver it around 360 degrees to find the perfect angle. Nice solid feeling switch button
Used to hold up heavy grow lights. The neck is flexible but very very sturdy. Fabulous clamping and arm control, holds your light in p,ace
The neck is not very strong and hold position well when bent. The rubber part of the clip keep it upright if clipped onto a bulb. Otherwise, the switch on the chord makes it more convenient to turn on and off and the compact size makes it easy to move and use throughout different areas of your house different parts of the day. The lamp holder is useful to clip above different plants in your house for a grow light (herb garden, mini rose bush), the clip is very secure and the neck can hold its shape. (Note: not too heavy)
Conclusion
By our suggestions above, we hope that you can found flexible aluminum heating cables for you.Please don’t forget to share your experience by comment in this post. Thank you!
